Lift Spindles for 2wd Toyota Pickup - TTORA Forum
 
LinkBack Thread Tools Display Modes
post #1 of 29 (permalink) Old 12-10-2008, 08:45 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
Lift Spindles for 2wd Toyota Pickup

As of 4-27-14 I can still make these if you get me 2 pairs of stock spindles (4 total, 2 lefts 2 rights makes 1 pair) and $300. I ceaned out the junkyards around here.

Custom made lift spindles for 95 and older 2wd 5lug toyota pickup 3" of lift, 1.5" wider per side. works with stock arms, aftermarket arms




04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)

Last edited by C4 Cory; 04-03-2015 at 06:33 PM. Reason: new price
C4 Cory is offline  
Sponsored Links
Advertisement
 
post #2 of 29 (permalink) Old 12-11-2008, 12:54 AM
Senior Member
iTrader: (3)
 
Whatthepho?'s Avatar
 
Join Date: May 2008
Location: Orange County, 90620
Posts: 219
Send a message via AIM to Whatthepho? Send a message via MSN to Whatthepho?
Were these for the 6 lugs or 5 Lugs?

<- 2000 Tacoma V6 TRD 2wd

Quote:
Originally Posted by asnyder View Post
yeah dude i fucked my sister.
There's a place where everyone can be happy. It's the most beautiful place in the whole fucking world. It's made of candy canes and planes and bright red choo-choo trains, And the meanest little boys and the most innocent little girls, And you know I wish that I could got there. It's a road that I have not found.
-Greg Graffin
Whatthepho? is offline  
post #3 of 29 (permalink) Old 12-11-2008, 01:11 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
5 lug

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #4 of 29 (permalink) Old 12-11-2008, 07:48 PM
Member
iTrader: (0)
 
Join Date: Sep 2008
Posts: 33
hey dude how many have you sold? and can i get a structural opinion on these? anyone else buy some?
TRD_yota is offline  
post #5 of 29 (permalink) Old 12-12-2008, 12:46 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
My friend is running them on his 94, and I would bet that they are stronger than the fabtek ones.

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #6 of 29 (permalink) Old 12-12-2008, 01:45 PM
Member
iTrader: (0)
 
Join Date: Sep 2008
Posts: 33
well if they are stronger than the fagtech ones then thats good enough for me. so i take it your a metal fabricator. so then i might want to pick up a set. i have a spare set of spindles just i dont have 350 lying around. how long do you plan on selling them? and were is yucca valley? im in san bernardino. thanks and have any more pictures?
TRD_yota is offline  
post #7 of 29 (permalink) Old 12-12-2008, 02:45 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
I plan to make more an dkeep on making them. Yucca is about an hour from san bernardino

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #8 of 29 (permalink) Old 12-13-2008, 05:34 PM
Member
iTrader: (0)
 
Join Date: Sep 2008
Posts: 33
what is the material do you use?
TRD_yota is offline  
post #9 of 29 (permalink) Old 12-13-2008, 10:51 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
2 pairs of stock spindles and cold rolled plat

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #10 of 29 (permalink) Old 12-13-2008, 11:20 PM
Member
iTrader: (0)
 
Join Date: Sep 2008
Posts: 33
so 4 spindles and plate? Sounds sturdy. I'll let you know when I get some cash to get them.
TRD_yota is offline  
post #11 of 29 (permalink) Old 12-16-2008, 08:29 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
yeah, They make me wish I had one of these trucks just so I could put them on it.

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)

Last edited by C4 Cory; 12-18-2008 at 01:32 PM.
C4 Cory is offline  
post #12 of 29 (permalink) Old 12-16-2008, 10:50 PM
Member
iTrader: (2)
 
Join Date: Jul 2007
Posts: 69
u should make some spindles for 01-04 id buy them
trdtacoprerunr is offline  
post #13 of 29 (permalink) Old 12-18-2008, 05:50 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
I would, but I need some stock ones ot mess with and build them from

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #14 of 29 (permalink) Old 01-08-2009, 06:29 PM
Newbie
iTrader: (0)
 
Join Date: Jan 2009
Posts: 1
There are other fabicated spindles out there for these trucks. We also make them. I don't want to hijack so I will leave it at that.
Obsessed Motorsports is offline  
post #15 of 29 (permalink) Old 01-09-2009, 10:50 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
I sold this set, but I should have another set done by monday.

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #16 of 29 (permalink) Old 02-03-2009, 11:17 PM
Member
iTrader: (0)
 
Join Date: Sep 2008
Posts: 33
dude can you get pictures of the spindles on your friends truck and how they look?
TRD_yota is offline  
post #17 of 29 (permalink) Old 03-07-2009, 10:00 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
It has been a wile but I have another set ready and here they are on a truck with sagging torsion bars and it's not a good pic but you get the idea


04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)

Last edited by C4 Cory; 08-16-2012 at 10:08 AM.
C4 Cory is offline  
post #18 of 29 (permalink) Old 03-07-2009, 10:15 PM
Member
iTrader: (0)
 
Join Date: Sep 2008
Posts: 33
so thats lifted 3 inches in the front? but i see those are the stock wheels and tires which have no offset. look good i just got to scrounge some money to get some.
TRD_yota is offline  
post #19 of 29 (permalink) Old 04-29-2009, 08:33 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
I still make these but i can't find any more stock spindles around here to use. So if anyone want a pair I can do them if you get me 2 pairs of stock spindles and $300. I ceaned out the junkyards around here.

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #20 of 29 (permalink) Old 04-29-2009, 08:59 PM
Member
iTrader: (0)
 
Join Date: Sep 2008
Posts: 33
2 pairs and 300 bucks?you mean like 4 spindles or just 2?
TRD_yota is offline  
post #21 of 29 (permalink) Old 04-29-2009, 10:22 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
it takes 2 pairs of stock to make one pair of lift

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #22 of 29 (permalink) Old 05-05-2009, 09:56 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
bump

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #23 of 29 (permalink) Old 06-07-2009, 01:38 AM
Newbie
iTrader: (0)
 
jmcgowan79's Avatar
 
Join Date: Jun 2009
Location: PHX, AZ
Posts: 4
What's the turn around time if we have to send you our spindles off our truck (+ a pair from junkyard)
jmcgowan79 is offline  
post #24 of 29 (permalink) Old 06-07-2009, 04:21 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
I can get them done in 2 days

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #25 of 29 (permalink) Old 10-01-2010, 10:08 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
I have set made and ready to sell now as of 10-1-10 they will go fast

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #26 of 29 (permalink) Old 05-13-2012, 10:22 PM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
I do still make these, it's just that I can't keep any around cause they sell before I can finsh them or someone brought me there spindles to turn into lift spindles, witch is more common cause I have used most of the junk yard spindles around here.

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #27 of 29 (permalink) Old 08-16-2012, 10:21 AM Thread Starter
Senior Member
iTrader: (2)
 
Join Date: May 2006
Location: Yucca Valley, CA
Posts: 230
If anyone kind of close to 92248 has any stock spindles setting around that they want to get rid of for a little $ please let me know, I have a few people that want lift spindles

04 Tacoma D-Cab TRD 4wd
85 4wd pickup (or, whats left it)
C4 Cory is offline  
post #28 of 29 (permalink) Old 02-23-2015, 02:53 PM
Newbie
iTrader: (0)
 
Join Date: Feb 2015
Posts: 1
I have 1991 toyota pickup 2wd and i'm looking to get custom 3" lift spindles for my truck. Do you still have any or can you make some out if mine + a second set?
Thanks
MTLfab is offline  
post #29 of 29 (permalink) Old 10-25-2015, 03:42 PM
Newbie
iTrader: (0)
 
Join Date: Aug 2015
Posts: 1
Anyone know where this guy went? Is he still active? I tried PMing him, but haven't heard anything yet. Apparently he is the only one that has lift spindled for the 2wd toyotas, as calling total chaos and others is not really working out for me.
thekryptkeeper is offline  
Reply
Gear in this thread - Powered by O'Reilly Auto Parts

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TTORA Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
What are lift spindles? navyseals101 Newbie Tech 6 07-19-2007 08:47 PM
FS 1994 Toyota Pickup 4x4 w lift n BFG's toyotamudfun For Sale/WTB in OH 1 04-22-2007 09:41 AM
FS 1994 Toyota Pickup 4x4 w lift n BFG's toyotamudfun Vehicles/Trailers 5 04-22-2007 09:40 AM
FS:1986 Toyota Pickup 4x4 3"lift, 33's in MD 05TuRDTACO Vehicles/Trailers 4 11-20-2006 08:18 PM
Tuff Country 5" lift! Spindles will work w/ ProComp lift MadMaxz Suspension 1 06-26-2006 03:44 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome