Anyone made a modification to All pro? - TTORA Forum
LinkBack Thread Tools Display Modes
post #1 of 4 (permalink) Old 03-14-2007, 10:15 PM Thread Starter
Senior Member
bagal's Avatar
Join Date: Feb 2006
Location: Duncanville TX
Posts: 169
Anyone made a modification to All pro?

I put a 2in BL on my truck and need to raise the front allpro bumper to fit clean again. The back bumper was a 30min fab job, but the front is a little different, I have to make it work in the stock location and I have a winch so it has to be completely sound in structure. Any ideas are appreciated. Here is a pic where the frame mounts are pretty visible.

03 trd 4 por 4... totaled.

Originally Posted by toku58
It's just that this forum is filled with "Haters" That have nothing better to do, than to act a fool?
bagal is offline  
Sponsored Links
post #2 of 4 (permalink) Old 03-14-2007, 10:43 PM
Veteran Member
Join Date: Dec 2004
Location: Huntington Bch, Ca
Posts: 2,478
I did one for TacoDell. If you search All Pro bumper mods, you'll find the thread with pics.
rojodiablo is offline  
post #3 of 4 (permalink) Old 03-14-2007, 10:49 PM
Veteran Member
peekay331's Avatar
Join Date: Dec 2004
Location: los angeles
Posts: 925
Send a message via AIM to peekay331
please post a pic of the back bumper fab. i just got one and have a 1.5" bodylift.
2001 D-cab 4x4 TRD
32" BFG AT on 589's
King coilovers
Alcan springs
Bilstein 5150's
1.5 bodylift
ARB bumper
Demello sliders
RDS auxiliary fuel tank/tool box
Bel air shell
Garmin 2610 gps and Gpsmap 76
Extremeair 3/4 hp knockoff
peekay331 is offline  
post #4 of 4 (permalink) Old 03-15-2007, 12:38 AM
truck ~n~ tow
TacoDell's Avatar
Join Date: May 2005
Location: Hemet/SoCal
Posts: 10,917
Originally Posted by rojodiablo
I did one for TacoDell. If you search All Pro bumper mods, you'll find the thread with pics.
Paul that was just raising the main hoop... I think he wants to raise the whole bumper ?

A pic of Paul's fine work just the same...
Mine with the 1"BL

Go Here for all the pics


Raising the AP bumper is not going to be worth the cost and effort... Plus it would just make it weaker changing the leverage point...

If you want to bring it up to the new level... Maybe weld a second horizontal tube above the main tube and it will look like it is more inline with the body...

That or just do a filler plate on the upper side of the bumper and call it good (that's how I'm gonna deal with it) ...

To mod this bumper you would need to lower the primary front mounting plates... Lower the winch platform... and more... and by the time you got done... You could have just built a whole new custom bumper for less money and time spent...

If you can't live with it and do a little fill in work to hide the gap...

Then I'd suggest selling it and doing something else...

But hey... if you got the skills and the time... go for it...

Originally Posted by Scootn2nature View Post
so fuck off you little 18 yr old lying ass punk.
'00 Taco SR5, xtrcab, V6, 5-SP, 4X, and some extras...

~n~ road action photo's

Truck build --- Trailer build

Last edited by TacoDell; 03-15-2007 at 12:43 AM.
TacoDell is offline  

Quick Reply

Register Now

In order to be able to post messages on the TTORA Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pro Comp Tires Buy 3 Get 1 FREE PLUS FREE SHIPPING!!! 4wheelcustoms Vendors Marketplace 2 03-05-2007 01:19 PM
FJ suspension All Pro or DR? Nevada_FJ Suspension 23 02-13-2007 09:23 PM
All Pro lift for FJ Cruser rattles Flyfishdds Newbie Tech 2 10-25-2006 07:16 AM
Pro Comp or Spacer Lift CindiJS Suspension 19 02-27-2005 04:44 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome