Budget Crawler Hauler - TTORA Forum
Toyota Territory Off-Roaders AssociationToyota Territory Off-Roaders Asso
ciationToyota Territory Off-Roaders Association
     


Go Back   TTORA Forum > Regional Forums > Ohio > Tech
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


Reply
 
LinkBack Thread Tools
Display Modes
Old 01-17-2012, 06:38 PM   #1 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
Budget Crawler Hauler

I have been shopping for a trailer now for a while, and was getting frustrated. Everything nice I found I could not afford and I did not want any of the junk I could afford. What to do?

Well new years eve I bought this for a song.



It started life as a 1983 Jayco camper. I bought the frame from a guy who scrapped it out. It was 26' long when I bought it, it had dual 4500lb axles both with brakes. I took them apart and repacked the bearings and they were in good shape. All 4 brakes work as well.

My first task was to put a lift kit on it. This was neccesary to get it to clear my dodge and ride level. It is also gonna allow me to deck over the tires instead of having fenders. To lift it I simply moved the springs from the bottom side of the axle to the top.

Next up I bobbed it to 20'. 26' was not enough for two rigs and it got kinda flimbsy toward the backend so I choped it down for maneuverability purposes. I then dovetailed the last two feet so I got a 18' flat deck and a two foot slant.

Next up is wireing, then decking, and new tires and wheels. When its all done I should have about 1100$ in it. I think that is dam cheap considering what I will have.

I will snap some more pics this weekend.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
Old 01-21-2012, 03:37 PM   #2 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
Worked on it more today doing reenforceing and framing, should finish that up tomorrow then gonna clean it up a little and paint it before we deck it.





A couple notes:
1. Every bit of steel that was on it at 26' is still gonna be on it in some shape or way at 20'.
2. According to the title it weighed 6180 as a camper. I will miss my guess if it does not weigh less complete with my truck on it. And that weight is dry weight on the camper.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 01-22-2012, 08:36 AM   #3 (permalink)
Mr. President
 
head's Avatar
 
Join Date: Feb 2006
Location: Ravenna, Ohio
Posts: 1,253
Send a message via AIM to head
Looking good. It's too late now, but you probably should have kept the flat deck at 20' and then the dove tail. Cause I bet the first time someone asks you to move something, you are going to wish you had that extra couple feet. (cough, Eric )

Are you doing a wood or steel deck?

I would make sure to use a good chassis paint for the frame. Not necessarily POR-15, but at least something equivalent in rust stopping protection. Cause we all know what Michigan and Ohio winters are like.
__________________
~Jed

1984 Pickup Extended Cab - Trail Rig
Locked F/R, 4.88's, 37's, Hi-steer, Twin stick, Dual cases, Flatbed

1986 4runner - e-locker, 4.56's, 31's
1986 Pickup Extended Cab - Work in progress
2004 Chevy 2500HD Duramax 4x4 - Tow Rig
2004 Tacoma Extended Cab SR5 TRD 4X4 - SOLD

Blue Ribbon Coalition #51205
PhotoBucket Page
OHTTORA
head is offline   Reply With Quote Quick reply to this message
Old 01-22-2012, 11:25 AM   #4 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
I am gonna use treated lumber for the deck, I am not a fan of steel decks. I am prolly just gonna use tractor paint from tsc for it, the stuff is cheap and really quit durable. The thung is rock solid just surface rust.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 01-22-2012, 12:16 PM   #5 (permalink)
Senior Member
 
Join Date: Sep 2010
Posts: 179
Im with head on leaving longer. I have filled my 18 flat deck and i dont have a gooseneck to deal with. and i heard treated lumber will slowly eat the steel cause of the chemicals so you may want to look into that.
redyota is offline   Reply With Quote Quick reply to this message
Old 01-22-2012, 12:29 PM   #6 (permalink)
Mr. President
 
head's Avatar
 
Join Date: Feb 2006
Location: Ravenna, Ohio
Posts: 1,253
Send a message via AIM to head
Quote:
Originally Posted by redyota View Post
Im with head on leaving longer. I have filled my 18 flat deck and i dont have a gooseneck to deal with. and i heard treated lumber will slowly eat the steel cause of the chemicals so you may want to look into that.
With a good coat of paint, and some tar paper between the wood and the frame, I think he will be fine. I like the wood decks more because you can screw stuff down to it and it is alot cheaper to replace
__________________
~Jed

1984 Pickup Extended Cab - Trail Rig
Locked F/R, 4.88's, 37's, Hi-steer, Twin stick, Dual cases, Flatbed

1986 4runner - e-locker, 4.56's, 31's
1986 Pickup Extended Cab - Work in progress
2004 Chevy 2500HD Duramax 4x4 - Tow Rig
2004 Tacoma Extended Cab SR5 TRD 4X4 - SOLD

Blue Ribbon Coalition #51205
PhotoBucket Page
OHTTORA
head is offline   Reply With Quote Quick reply to this message
Old 01-22-2012, 02:12 PM   #7 (permalink)
Member
 
captain insano's Avatar
 
Join Date: Jan 2009
Posts: 56
Quote:
Originally Posted by Full_Tilt_Fud View Post
I am gonna use treated lumber for the deck, I am not a fan of steel decks. I am prolly just gonna use tractor paint from tsc for it, the stuff is cheap and really quit durable. The thung is rock solid just surface rust.
I read that the chemicals from treated lumber don't react well with steel. Oil treat untreated lumber for best results. Has anyone else heard/experienced this as well? Nice build, I'm jealous.
captain insano is offline   Reply With Quote Quick reply to this message
Old 01-22-2012, 05:42 PM   #8 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
I had never heard that about treated lumber, I just assumed that that was what new trailers came with. I stoped at Menards tonight and they say that it may have been true in the past that the treated would corrode the steel but that their treated they sell now will not. I am gonna go to an actual lumber yard tommorow and see what they say

On the length, there are a few reasons I cut it to 20'

1. Like I stated earlier....it got a little flimbsy out at 26'...these camper framed are not the strongest, it is more than strong enough to do what I want, but its not like going out abd buying a 26' deckover 5th wheel equipment trailer. Buy hacking it off at 20' and reusing the steel to reenforce the trailer I have 20' of space I dont have to worry about instead of 26' I do have to question.

2. Dodges like mine are tall from the get go, add in the fact mine is on 33's and it is up there. Even with the springs fliped I think the trailer is gonna sit uphill a little. At 26' there was alot of rear overhang and I think I would have been draging the rear alot even if I had not dovetailed it. At 20' even dovetailed I have minimal overhang and 22" of ground clearance aproximately. That will allow me to take that trailer most anywhere. I think it would easily go accross the tracks in Wellsvile.

3. I have access to much bigger, heavy duty trailers if I need one.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 01-23-2012, 08:42 PM   #9 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
I asked around a bunch ans searched with google and can get do difinitive answer on the whole treated lumber deal. Most people seem to think that it will be fine but that trying to isolate the treated from the steel wouldn't be a bad idea so thats what i'm going with. I was gonna use tar paper like Jed suggested but that was gonna be a real pain in the ass covering each little thing. What I am gonna do instead is buy a few cans of rubberized undercoating in spray cans and simply spray it anywhere wood could touch metal. This will be way easier and should provide a nice insolater between the two.

A couple more pics

1. Incase you did not believe that I put all the steel I cut off back on, this is proof. That is everything that was not put back on, everything else I cut off is in some way welded back on


2. Built a rear bumper out of an old I-beam. Will give me a place to hook ramps


Should have it wired tomorrow and then on to paint this weekend. What color do I paint it? Towrig is dark gray, trailrig is cream. Kinda thinking I want something other than normal old black.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 01-24-2012, 05:46 AM   #10 (permalink)
Mr. President
 
head's Avatar
 
Join Date: Feb 2006
Location: Ravenna, Ohio
Posts: 1,253
Send a message via AIM to head
Black is definately your cheapest option. But if you want it unique, I would match it to the towrig.
__________________
~Jed

1984 Pickup Extended Cab - Trail Rig
Locked F/R, 4.88's, 37's, Hi-steer, Twin stick, Dual cases, Flatbed

1986 4runner - e-locker, 4.56's, 31's
1986 Pickup Extended Cab - Work in progress
2004 Chevy 2500HD Duramax 4x4 - Tow Rig
2004 Tacoma Extended Cab SR5 TRD 4X4 - SOLD

Blue Ribbon Coalition #51205
PhotoBucket Page
OHTTORA
head is offline   Reply With Quote Quick reply to this message
Old 01-24-2012, 06:00 AM   #11 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
It would not be an exactmatch since my towrig is metallic, and I don't have the skill or time to do that,nor can I see spending that much money on paint for a trailer. I am gonna go to tsc and see if they have a dark charcoal gray paint of any kind and go from there. I also thought about a dark silver color since my towrig has silver pinstripes and they look really nice against the charcoal gray.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 01-24-2012, 06:03 AM   #12 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
What do you think about my undercoating idea? Think it will work?
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 01-24-2012, 07:08 AM   #13 (permalink)
Mr. President
 
head's Avatar
 
Join Date: Feb 2006
Location: Ravenna, Ohio
Posts: 1,253
Send a message via AIM to head
Quote:
Originally Posted by Full_Tilt_Fud View Post
What do you think about my undercoating idea? Think it will work?
I don't see why it wouldn't.
__________________
~Jed

1984 Pickup Extended Cab - Trail Rig
Locked F/R, 4.88's, 37's, Hi-steer, Twin stick, Dual cases, Flatbed

1986 4runner - e-locker, 4.56's, 31's
1986 Pickup Extended Cab - Work in progress
2004 Chevy 2500HD Duramax 4x4 - Tow Rig
2004 Tacoma Extended Cab SR5 TRD 4X4 - SOLD

Blue Ribbon Coalition #51205
PhotoBucket Page
OHTTORA
head is offline   Reply With Quote Quick reply to this message
Old 01-24-2012, 09:30 AM   #14 (permalink)
Veteran Member
 
crolison's Avatar
 
My Rig: Shorter Bus
Join Date: Mar 2007
Location: COORS Colorado
Posts: 5,474
Quote:
Originally Posted by head View Post
Black is definately your cheapest option. But if you want it unique, I would match it to the towrig.
plum
__________________
I am General Corrosion

Corrosion: - 97 4runner 2.7 (fat and slow) lost but not forgotten
Shorter Bus: - 98 taco 2.7 300k miles (fat, old and slow) lost but not forgotten
Short Round: - 97 single cab (2' of sheet metal) Now doing pizza delivery
Too nice: - 99 4runner 3.4 5spd ski/expo wagon
crolison is offline   Reply With Quote Quick reply to this message
Old 01-24-2012, 08:34 PM   #15 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
Got taillights / turnsignals and brakes all wired, once I get it decked I will need to add some additional marker lights.

For the color I am really leaning toward silver. Gonna work this weekend at preping it for paint / painting it.

Only took one pic tonight.....it can fly!!! Lol

__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 01-28-2012, 09:05 PM   #16 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
Got the hitch in my dodge today...must say it is super easy to install in a dodge like mine compared to chevys or some others. Hooked the trailer up and adjusted everything to get it riding correctly



It sits on there pretty decent as is and would haul ok. The new tires I am getteing are a couple inches taller which will help. I am also likely going to toss a leveling kit on the dodge to get rid of the forward rake which will also help.

The bad news is I have no way to paint it till the weather gets warmer . So for now I am just gonna do the stuff the decj is gonna hide then in the spring I will flip it on its side and fully paint it.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 01-29-2012, 08:56 AM   #17 (permalink)
Mr. President
 
head's Avatar
 
Join Date: Feb 2006
Location: Ravenna, Ohio
Posts: 1,253
Send a message via AIM to head
Looking good. Is it just me or does it seem like the axles are pretty far back?
__________________
~Jed

1984 Pickup Extended Cab - Trail Rig
Locked F/R, 4.88's, 37's, Hi-steer, Twin stick, Dual cases, Flatbed

1986 4runner - e-locker, 4.56's, 31's
1986 Pickup Extended Cab - Work in progress
2004 Chevy 2500HD Duramax 4x4 - Tow Rig
2004 Tacoma Extended Cab SR5 TRD 4X4 - SOLD

Blue Ribbon Coalition #51205
PhotoBucket Page
OHTTORA
head is offline   Reply With Quote Quick reply to this message
Old 01-29-2012, 11:50 AM   #18 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
They are a little far back. I didn't feel like going through all the work of moving them, especially since my truck is sprung really heavy. And the extra weight up on the truck is not any issue. Really about 1' forward is all the more you would want them to go and it was gonna be a lot of work for not alot of gain.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 02-04-2012, 08:30 PM   #19 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
More progress. Should br done with everything except wheeld / tires tommorow.



__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 02-05-2012, 07:31 AM   #20 (permalink)
Mr. President
 
head's Avatar
 
Join Date: Feb 2006
Location: Ravenna, Ohio
Posts: 1,253
Send a message via AIM to head
Looking good. What are planning on using for tie-down points?
__________________
~Jed

1984 Pickup Extended Cab - Trail Rig
Locked F/R, 4.88's, 37's, Hi-steer, Twin stick, Dual cases, Flatbed

1986 4runner - e-locker, 4.56's, 31's
1986 Pickup Extended Cab - Work in progress
2004 Chevy 2500HD Duramax 4x4 - Tow Rig
2004 Tacoma Extended Cab SR5 TRD 4X4 - SOLD

Blue Ribbon Coalition #51205
PhotoBucket Page
OHTTORA
head is offline   Reply With Quote Quick reply to this message
Old 02-05-2012, 06:05 PM   #21 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598


Loaded a truck on it today....that truck weighs 6200lbs. Also weighed the trailer....weighs in at 2720....it and my dodge come in at 9100 lbs together. Towed it about 50 miles at speeds up to 70+ and it tows and rides awsome!!!

For tiedowns I mounted some loops up front and on back. I will take some pics tommorow.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 02-05-2012, 08:48 PM   #22 (permalink)
Veteran Member
 
Shakerhood's Avatar
 
Join Date: Dec 2004
Location: Ohio
Posts: 1,956
Looks good, nice budget trailer!
Shakerhood is offline   Reply With Quote Quick reply to this message
Old 02-05-2012, 09:02 PM   #23 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
Thanks!!

It will work for now.....in the future I would like to cut it apart up in the front. The vertical piece at the front of the deck that the "tounge" attaches too needs to be about 3-4" taller. Its not a huge deal but it bugs me cause its not square. I have 20' of 3" x 4" heavy duty c-channel in my garage, so phase two will involve lifting / reinforcing the front hitch part.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 02-06-2012, 02:13 PM   #24 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
So the state of Michigan has decided to be assholes about plateing it. I got some ideas though on how to give them the big
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 02-08-2012, 09:02 AM   #25 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598


Sets on there good. I have to do something with it though....i hate the way the trailer sits high in the front and the truck sits high in the back....they need to be more parralell. I am gonna start with the truck I think since I hate how it sits way ass high all the time. From the factory it has a 4" block under the rear springs, so I am either gonna toss it and put a 2" block in its place or toss the block and springs both and run a 2" lift spring with no block. The second option is what I would prefer...just depends on what the springs cost. At that point I will reassess it and change the trailer too if I have to. Droping the truck 2" will actually allow me to drop the hookup point close to 5" since the truck and trailer will be more paralell and I willl be able to adjust the hitch down lower while maintaining clearance at the tail gate.

Of course if I was not a broke ass I could have just cought a trailer that worked right in the first place
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 02-09-2012, 03:45 AM   #26 (permalink)
Out of Money
 
ohio03trdtaco's Avatar
 
Join Date: Oct 2005
Location: Oberlin, Oh
Posts: 2,865
Send a message via Yahoo to ohio03trdtaco
Todd will the trailer tongue hit the bed sides if the cab is a little nose down and turning? Just seems really close in the pic but that is just how pic's can be some times.
ohio03trdtaco is offline   Reply With Quote Quick reply to this message
Old 02-09-2012, 05:07 AM   #27 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
Santa

It wont hit but it gets close...in that pic the truck is downhill and the trailer is tipped toward the camera. That is what I am trying to fix by lowering the truck. Problem is the truck does not drop at all when you hook the loaded trailer to it.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 02-15-2012, 06:14 PM   #28 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
Got it plated today....didn't have to jump through hoops or pay out the ass either. state of michigan
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 03-06-2012, 02:59 PM   #29 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
Towed my truck with it for the first time saturday. Holy shit does this thing tow nice!! I could not be happier...and I towed it with the old junk tires so it should be better yet now since I got new tires and wheels for it saturday as well.
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Old 03-19-2012, 07:07 AM   #30 (permalink)
Veteran Member
 
Full_Tilt_Fud's Avatar
 
My Rig: 1985 Pickup
Join Date: Nov 2005
Location: Battle Creek, Michigan
Posts: 3,598
towed it 100 or so more miles.....this time with the new tires....works perfect....now just need to paint it
__________________
~ Todd

85 ex. cab 1 tons, coilovers, ect

09 Dodge Ram 2500 w/ a Cummins.....Tow rig
Full_Tilt_Fud is offline   Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the TTORA Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Insurance
Please select your insurance company (Optional)

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Crawler Hauler (International Box Truck) justinh For Sale/WTB in GA 5 02-22-2008 05:40 AM
RC Crawler budget build parts list?? wmflyfisher Off Topic 9 08-18-2007 10:53 PM
Trade: 2 85 Pickups for one 4-Runner Crawler......hard core 85 crawler+mint 85 Stock BikeMan Vehicles/Trailers 32 07-07-2007 11:16 PM
Crawler Hauler Mike Off Topic 39 05-30-2006 12:37 AM

» Premium Vendor Showcase
» Recent Discussions
Been gone for a while....
Today 01:26 PM
Last post by joeylead
Today 01:26 PM
0 Replies, 15 Views
Gattora.com Domain...
Yesterday 11:19 AM
by *Darcy*
Last post by *Darcy*
Today 12:44 PM
2 Replies, 91 Views
Electrical/battery drain...
07-21-2016 06:53 AM
Last post by gregers05
Today 10:46 AM
7 Replies, 351 Views
SE-TTORA Southeast...
05-24-2016 10:55 AM
by *Darcy*
Last post by gregers05
Today 10:44 AM
56 Replies, 1,697 Views
death of a TTORA...
Yesterday 05:17 PM
Last post by quetzal
Today 06:47 AM
1 Replies, 83 Views
Torsion bar assistance
Yesterday 10:26 PM
Last post by graymatter92
Yesterday 10:26 PM
0 Replies, 31 Views
2009 Tacoma 4-link
05-28-2009 12:36 PM
Last post by yotalove
Yesterday 05:37 PM
192 Replies, 80,905 Views
2016 4x4 V6...
Yesterday 10:32 AM
Last post by partyman666
Yesterday 04:47 PM
1 Replies, 71 Views
Tacitos from Tacoma World
Yesterday 01:34 PM
by Tacitos
Last post by quetzal
Yesterday 01:49 PM
1 Replies, 46 Views
POWERTRAX LOCK-RIGHT...
02-25-2015 09:15 AM
Last post by JTSDIFFS
Yesterday 12:12 PM
6 Replies, 934 Views
» Buyer's Resource
Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 03:42 PM.




Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2016, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2016 DragonByte Technologies Ltd.