FS: Icon billet UCA, 95.5-04 - TTORA Forum
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 06-25-2010, 01:27 PM Thread Starter
Senior Member
PELLEY's Avatar
Join Date: Jan 2009
Location: Edwards AFB
Posts: 145
FS: Icon billet UCA, 95.5-04

Used Icon billet upper control arms. I bought these used from another TTORA member. He told me they were some of the original Donahoo/Icon billet uppers that were used on their 7S truck. When I bought them a few parts were missing and I have filled in the blanks. They are in decent condition. They have some scratches and a few very small gouges on the bottom of the arms but nothing that is noticeable when installed and nothing that hurts the integrity of the arms. I had to machine two new spacers that were not included in the original sale, you will see them on one of the arms (darker color, machined from 4130). Also missing from the original sale were the spindle slugs which I got from Camburg (Icon wanted $200 for their replacements, $45 from Camburg with bolts, haha). I had to trim down the top misalignment spacer to make them fit right but they work as they are supposed to. I also had to sand some reliefs in the top of the arms so the misalignment's would not rub on the arms. They areas sanded are sanded smooth and look good, they do not take away from the strength of the arms as far as I can tell. The hiems are in good shape and do not need replacement, the uni-balls on the other hand are bad and need to be replaced (must buy from Icon, they are the short 1" balls that most stores do not sell). Also included are steal braided brake lines (not pictured, still on the truck, coming off next week).

This is a complete kit (minus the uni-balls that need to be replaced). It worked and looked great. Wish I would have remembered to snap a picture of it on the truck but I forgot. The couple times I hit the dirt with it I had zero problems and it worked great. If I was keeping the truck I would keep the kit on there, but the truck is being sold (w/o the kit, haha). $350 is my asking price! I can also install if you want for extra. Shipping on your dime. Located in Palmdale, CA 93551. Thanks!!!
PELLEY is offline  

Quick Reply

Register Now

In order to be able to post messages on the TTORA Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Icon Coilovers and Billet UCA 95.5-04 Tacoma PELLEY Parts/Electronics/Wheels/Tires 20 07-05-2010 05:16 PM
ICON Tacoma Billet Shift Knobs ICON2 Vendors Marketplace 0 01-29-2010 05:51 PM
ICON billet UCA's (the heim joints) chad68 Suspension 14 09-23-2009 10:37 AM
ICON Vehicle Dynamics Billet Upper Control Arms for the 95.5-04 Tacoma icon_rep Suspension 17 04-20-2009 12:35 AM
ICON Vehicle Dynamics / Billet Aluminum Shift Knobs! icon_rep Interior/Electrical/Electronics 8 12-10-2008 10:47 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome