Attack of the Dcab Mall Ready SAS - TTORA Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 39 (permalink) Old 10-22-2005, 01:35 AM Thread Starter
Veteran Member
 
Join Date: Dec 2004
Posts: 650
Attack of the Dcab Mall Ready SAS

Some pics of a buddy's mall rig. So i dont think it will ever see dirt...The 18" rims cost more than my axle and it is only about 7" over the legal heigh limit. For height comparison, the tires are 38's and i cannot see into the windows when standing next to the damn thing. Poor boy is going to get a lot of tickets.

http://www.norcalttora.com/~chuck/Be...b/P1150011.JPG

http://www.norcalttora.com/~chuck/Be...b/P1150013.JPG

-Chuck

"Stupidity should be painful"
snowchucker is offline  
Sponsored Links
Advertisement
 
post #2 of 39 (permalink) Old 10-22-2005, 02:11 AM
I just got laid... off.
 
wslytoy's Avatar
 
Join Date: Dec 2004
Location: Madison, Ms
Posts: 5,216
Quote:
Originally Posted by snowchucker
Some pics of a buddy's mall rig. So i dont think it will ever see dirt...The 18" rims cost more than my axle and it is only about 7" over the legal heigh limit. For height comparison, the tires are 38's and i cannot see into the windows when standing next to the damn thing. Poor boy is going to get a lot of tickets.

http://www.norcalttora.com/~chuck/Be...b/P1150011.JPG

http://www.norcalttora.com/~chuck/Be...b/P1150013.JPG

DAAYYYUMMM! You're probably right, it won't ever leave the asphalt, but damn, that thing is fine. I guess this whole BIG RIM thing is growing on me, I love the MTZ's.

New(to me):
2006 Sport Edition 4WD 4Runner
2.5" Bilstein 5100 in front
1.5" spacer out back
265/75R17 Mickey Thompson ATZ's
Eagle Series 140 in 17x8


OLD:
05' TRD 4x4
96' Tacoma 2.7 Ext Cab 5spd w/ a mod or 2

85' 4Runner Build Up Thread
wslytoy is offline  
post #3 of 39 (permalink) Old 10-22-2005, 03:16 AM
norcal n00b
 
Zackattak's Avatar
 
Join Date: Dec 2004
Location: Walnut Creek, Norcal
Posts: 802
Send a message via AIM to Zackattak
I saw that thing in person.....DAMN is it HIGH!!

-Zack

CA4WDMember#9373
Zackattak is offline  
post #4 of 39 (permalink) Old 10-22-2005, 06:18 AM
jh3
Veteran Member
 
Join Date: Jun 2005
Location: Chatt,TN
Posts: 2,057
Paint the wheels black and I'll take it!
jh3 is offline  
post #5 of 39 (permalink) Old 10-22-2005, 09:37 AM
Veteran Member
 
awsumdc's Avatar
 
Join Date: Dec 2004
Location: SoCal, O.C.
Posts: 2,813
Quote:
Originally Posted by snowchucker
Some pics of a buddy's mall rig. So i dont think it will ever see dirt...The 18" rims cost more than my axle and it is only about 7" over the legal heigh limit. For height comparison, the tires are 38's and i cannot see into the windows when standing next to the damn thing. Poor boy is going to get a lot of tickets.

http://www.norcalttora.com/~chuck/Be...b/P1150011.JPG

http://www.norcalttora.com/~chuck/Be...b/P1150013.JPG
That thing is bigger than mine and I'm riding on 40's. Geeez

'05 "SAC" Double Cab TRD Sport 4x4 with Marlin Crawler "Taco" Box and a bunch of other stuff.
Linked, Locked & Large!
"THE BEAST"

AKA "THE BIG SEXY"
Wyatt Scott

3.4 auto crawler install

Installing an FJ Case into an 05+ Tacoma

My Build thread. Building "The Beast"

GOT SAC?
awsumdc is offline  
post #6 of 39 (permalink) Old 10-22-2005, 01:35 PM
Resident offroad Doc
 
02tacotim's Avatar
 
Join Date: Dec 2004
Location: Fayetteville, NC
Posts: 1,108
Those are real nice running boards he's got on it...not. Must be a nice life when you don't know what to do with your money.

Tim

02 Tacoma V6 Dana 44 SAC, chromo's, BL 300M joints, full float rear, chromo's, disk's, ARB's F&R, PSC ram assist and a bunch of other stuff


Quote:
Originally Posted by FURACERMAN
I do this for a living, stacking lifts isn't that bad.
02tacotim is offline  
post #7 of 39 (permalink) Old 10-22-2005, 03:00 PM
Veteran Member
 
mojavehanna's Avatar
 
Join Date: Dec 2004
Location: Las Vegas, Nevada
Posts: 2,160
I like the no front drive shaft thing, why not just make it out of a pre runner?
mojavehanna is offline  
post #8 of 39 (permalink) Old 10-22-2005, 03:41 PM
THAT guy.
 
SAR_Squid79's Avatar
 
Join Date: Apr 2005
Location: San Diego, CA
Posts: 5,490
Send a message via Yahoo to SAR_Squid79
What a waste.

~Jamie
2000 Tacoma TRD 4WD PreRunner
Supercharged. Locked. Armored.


Mountain: She can crawl it.
Ass: She can haul it.


"Roads? Where we're going we don't need . . . roads."
~Dr. Emmett L. Brown

My Rig My Trailer 4xInnovations
SAR_Squid79 is offline  
post #9 of 39 (permalink) Old 10-22-2005, 04:26 PM
Senior Member
 
Join Date: Aug 2005
Posts: 155
Make him plunge it into a mudhole and post those pics...
HHTACO is offline  
post #10 of 39 (permalink) Old 10-22-2005, 04:39 PM
Newbie
 
AngryAndy's Avatar
 
Join Date: Dec 2004
Location: Concord,Ca
Posts: 0
Send a message via AIM to AngryAndy Send a message via Yahoo to AngryAndy
Quote:
Originally Posted by snowchucker
Some pics of a buddy's mall rig. So i dont think it will ever see dirt...The 18" rims cost more than my axle and it is only about 7" over the legal heigh limit. For height comparison, the tires are 38's and i cannot see into the windows when standing next to the damn thing. Poor boy is going to get a lot of tickets.

http://www.norcalttora.com/~chuck/Be...b/P1150011.JPG

http://www.norcalttora.com/~chuck/Be...b/P1150013.JPG
Do you think you can fab me up a pair of those sliders????

And I LOVE the front recovery points....

Just what we need.....ANOTHER NorCal Non-Wheeling SAS Tacoma....

Too bad its a D-Cab...I could use the tranny if it were a stick.

"Soupbowl Challenge Winner 2006"

1997 Xtracab SAS Tacoma
1989 SAS 4runner "Project Angry"
2007 FJ Cruiser
AngryAndy is offline  
post #11 of 39 (permalink) Old 10-22-2005, 07:28 PM
Senior Member
 
SilverStreak05's Avatar
 
Join Date: Jun 2005
Location: San Jose, CA
Posts: 326
Is your buddy compensating for something? Small penis maybe?

2005 D-Cab 4x4
DR CO's, DR Rear Resi shocks, Deaver 11 pack
285/75/16 Nitto Terra Grapplers
SilverStreak05 is offline  
post #12 of 39 (permalink) Old 10-22-2005, 09:55 PM
www.deserttaco.com
 
Deserttaco's Avatar
 
Join Date: Dec 2004
Location: Surprise AZ
Posts: 1,802
Does that front axle say "Dynatrac"??? HOLY$$$$

Is that a bentup creation? or did he have someone else do it?
Deserttaco is offline  
post #13 of 39 (permalink) Old 10-22-2005, 10:48 PM
Veteran Member
 
Brain's Avatar
 
Join Date: Nov 2004
Location: Dublin, CA
Posts: 3,380
Send a message via AIM to Brain
Quote:
Originally Posted by Norcalvp
Does that front axle say "Dynatrac"??? HOLY$$$$

Is that a bentup creation? or did he have someone else do it?
I think anyone can buy those Dynatrac diff covers.

-The Brain
Brain is offline  
post #14 of 39 (permalink) Old 10-22-2005, 10:57 PM
www.deserttaco.com
 
Deserttaco's Avatar
 
Join Date: Dec 2004
Location: Surprise AZ
Posts: 1,802
True, but some people have the $$$ to fork out the dough for an acutal dynatrac axle...
Deserttaco is offline  
post #15 of 39 (permalink) Old 10-23-2005, 01:36 AM
Going John Galt
 
hytenor's Avatar
 
Join Date: Dec 2004
Location: Norcal
Posts: 31,775
Quote:
Originally Posted by snowchucker
Some pics of a buddy's mall rig. So i dont think it will ever see dirt...The 18" rims cost more than my axle and it is only about 7" over the legal heigh limit. For height comparison, the tires are 38's and i cannot see into the windows when standing next to the damn thing. Poor boy is going to get a lot of tickets.

http://www.norcalttora.com/~chuck/Be...b/P1150011.JPG

http://www.norcalttora.com/~chuck/Be...b/P1150013.JPG
damn, that things taller than Anthony's, LOL

Quote:
Originally Posted by Teryx View Post
Yeah, well, I'm just glad I snagged a few Spector cans before EPA converted them to Sphincters
Quote:
Originally Posted by Tacoma Jake View Post
Lube may be your best friend (depending on location).
'00 Excab Tacoma, 2.7, 5sp with a Bunch-o-mods
Inchworm Rock Walkin' Gear
hytenor is offline  
post #16 of 39 (permalink) Old 10-23-2005, 01:43 AM
I just got laid... off.
 
wslytoy's Avatar
 
Join Date: Dec 2004
Location: Madison, Ms
Posts: 5,216
Quote:
Originally Posted by SilverStreak05
Is your buddy compensating for something? Small penis maybe?

maybe he just likes big trucks, and it has nothing to do w/ his DONG!!!

New(to me):
2006 Sport Edition 4WD 4Runner
2.5" Bilstein 5100 in front
1.5" spacer out back
265/75R17 Mickey Thompson ATZ's
Eagle Series 140 in 17x8


OLD:
05' TRD 4x4
96' Tacoma 2.7 Ext Cab 5spd w/ a mod or 2

85' 4Runner Build Up Thread
wslytoy is offline  
post #17 of 39 (permalink) Old 10-23-2005, 01:43 AM
I just got laid... off.
 
wslytoy's Avatar
 
Join Date: Dec 2004
Location: Madison, Ms
Posts: 5,216
Quote:
Originally Posted by Norcalvp
Does that front axle say "Dynatrac"??? HOLY$$$$

Is that a bentup creation? or did he have someone else do it?

yeah those are pretty cheap huh !

New(to me):
2006 Sport Edition 4WD 4Runner
2.5" Bilstein 5100 in front
1.5" spacer out back
265/75R17 Mickey Thompson ATZ's
Eagle Series 140 in 17x8


OLD:
05' TRD 4x4
96' Tacoma 2.7 Ext Cab 5spd w/ a mod or 2

85' 4Runner Build Up Thread
wslytoy is offline  
post #18 of 39 (permalink) Old 10-23-2005, 10:32 AM
Senior Member
 
EndersTaco's Avatar
 
Join Date: May 2005
Location: Hampton Roads VA
Posts: 214
Quote:
Originally Posted by blackhawk223
I like the no front drive shaft thing, why not just make it out of a pre runner?
I was looking at that and thinking the same damn thing. Though I just chalked it up to being a noob, I didnt think that anyone would SAS a prerunner....
EndersTaco is offline  
post #19 of 39 (permalink) Old 10-23-2005, 12:19 PM
7wt
nothing special
 
7wt's Avatar
 
Join Date: Dec 2004
Location: Connecticut
Posts: 456
I am not authorized to view that page....
7wt is offline  
post #20 of 39 (permalink) Old 10-23-2005, 12:57 PM
Veteran Member
 
Join Date: Dec 2004
Location: El Cajon CA
Posts: 1,497
Quote:
Originally Posted by snowchucker
Some pics of a buddy's mall rig. So i dont think it will ever see dirt...The 18" rims cost more than my axle and it is only about 7" over the legal heigh limit. For height comparison, the tires are 38's and i cannot see into the windows when standing next to the damn thing. Poor boy is going to get a lot of tickets.

http://www.norcalttora.com/~chuck/Be...b/P1150011.JPG

http://www.norcalttora.com/~chuck/Be...b/P1150013.JPG
Whether dude wheels it, is still getting his front D-shaft made, has just a Dyna cover or axle, gets tickets, or anything else, I am as always very impressed with your exceptional work! VERY nice, clean, and attention to detail all seem to be things I notice on all of your project photo's that end up on here. Nice job. Let's hope this can one day be your only line of work you do, if that is what you desire it to become.
Again, good work.

Truck specs:2001 D-cab Taco with solid axle conversion, front and rear 65" wide Diamond axles, Tundra 8 inch rear w/ARB, H.P. front w/ARB 30 spline Long's, full floating rear from FROR and blah blah blah, IE lots-a cool stuff.

Later~captkirkyota~Kirk
Captkirkyota is offline  
post #21 of 39 (permalink) Old 10-23-2005, 06:51 PM Thread Starter
Veteran Member
 
Join Date: Dec 2004
Posts: 650
a bit more info:
yes we did build it...
its a friend of Aj and timmmaaay's and he did NOT want to cut the fenders for some reason. the entire reason for the build is that the kid owns his own concrete company and this is his work/ promo truck. this thing sky's at least 8" over my rig (and im on 40's).
The 38" MT's are as tall as my 39.5" IROK's, but they weigh at least twice as much. He can still do a burn out, even though it has 38's!!
The front axle was completely built in house, the cover is just a dynatrack unit.
The front drive shaft is coming as well as hydro assist, track bar, and sway bar.
The front springs are 3" lifted waggy's... i do not recommend ever using them. first they are way too tall, 2nd, they are way too soft. when he jabs the brakes, this thing nose dives like you can not even imagine.
he will be coming back to clearance the fenders, remove the mall running boards, and maybe lower it a bit. he likes big trucks, and since he has a fine ass wife, i assume it doesnt matter how under endowed he may be.

-Chuck

"Stupidity should be painful"
snowchucker is offline  
post #22 of 39 (permalink) Old 10-23-2005, 09:04 PM
Veteran Member
 
YUNADERIS's Avatar
 
Join Date: Oct 2004
Location: North on the I5 freeway
Posts: 828
Send a message via AIM to YUNADERIS Send a message via Yahoo to YUNADERIS
can we get pics of the wife? thanks Chuck have her post with the truck....in a bikini....damn..thanks for looking out Chuck
YUNADERIS is offline  
post #23 of 39 (permalink) Old 10-23-2005, 09:27 PM
I just got laid... off.
 
wslytoy's Avatar
 
Join Date: Dec 2004
Location: Madison, Ms
Posts: 5,216
Quote:
Originally Posted by snowchucker
he likes big trucks, and since he has a fine ass wife, i assume it doesnt matter how under endowed he may be.

OK, whewww!!!! BTW, I'm w/ Anthony, we need pics of the wife, LOL!!

New(to me):
2006 Sport Edition 4WD 4Runner
2.5" Bilstein 5100 in front
1.5" spacer out back
265/75R17 Mickey Thompson ATZ's
Eagle Series 140 in 17x8


OLD:
05' TRD 4x4
96' Tacoma 2.7 Ext Cab 5spd w/ a mod or 2

85' 4Runner Build Up Thread
wslytoy is offline  
post #24 of 39 (permalink) Old 10-23-2005, 09:27 PM
I just got laid... off.
 
wslytoy's Avatar
 
Join Date: Dec 2004
Location: Madison, Ms
Posts: 5,216
Quote:
Originally Posted by YUNADERIS
can we get pics of the wife? thanks Chuck have her post with the truck....in a bikini....damn..thanks for looking out Chuck

I'd rather her be naked, but beggers can't be choosers, LOL!!

New(to me):
2006 Sport Edition 4WD 4Runner
2.5" Bilstein 5100 in front
1.5" spacer out back
265/75R17 Mickey Thompson ATZ's
Eagle Series 140 in 17x8


OLD:
05' TRD 4x4
96' Tacoma 2.7 Ext Cab 5spd w/ a mod or 2

85' 4Runner Build Up Thread
wslytoy is offline  
post #25 of 39 (permalink) Old 10-23-2005, 11:47 PM
Senior Member
 
psycho's Avatar
 
Join Date: Dec 2004
Location: 5th Generation, San Diegan
Posts: 343
well thats definetly an attention grabber.

I was just in Sacremento this weekend, that would have been sweet to see.

1996 4Runner SR5 4x4 3.4L V6
psycho is offline  
post #26 of 39 (permalink) Old 10-24-2005, 12:36 AM Thread Starter
Veteran Member
 
Join Date: Dec 2004
Posts: 650
Height comparison... i may feel small, but at least my o-ring wont leak on a side hill.

http://www.norcalttora.com/~chuck/Be...b/joshsky1.jpg
http://www.norcalttora.com/~chuck/Be...b/joshsky2.jpg

-Chuck

"Stupidity should be painful"
snowchucker is offline  
post #27 of 39 (permalink) Old 10-24-2005, 12:54 AM
Going John Galt
 
hytenor's Avatar
 
Join Date: Dec 2004
Location: Norcal
Posts: 31,775
Quote:
Originally Posted by snowchucker
Height comparison... i may feel small, but at least my o-ring wont leak on a side hill.

http://www.norcalttora.com/~chuck/Be...b/joshsky1.jpg
http://www.norcalttora.com/~chuck/Be...b/joshsky2.jpg
I seriously hope this guy has the brains to keep that thing off side hills.

Quote:
Originally Posted by Teryx View Post
Yeah, well, I'm just glad I snagged a few Spector cans before EPA converted them to Sphincters
Quote:
Originally Posted by Tacoma Jake View Post
Lube may be your best friend (depending on location).
'00 Excab Tacoma, 2.7, 5sp with a Bunch-o-mods
Inchworm Rock Walkin' Gear
hytenor is offline  
post #28 of 39 (permalink) Old 10-24-2005, 07:19 AM
NE > PA
 
Intrepid's Avatar
 
Join Date: Feb 2005
Location: Westminster, MA
Posts: 1,359
Send a message via AIM to Intrepid
Quote:
Originally Posted by snowchucker
Height comparison... i may feel small, but at least my o-ring wont leak on a side hill.

http://www.norcalttora.com/~chuck/Be...b/joshsky1.jpg
http://www.norcalttora.com/~chuck/Be...b/joshsky2.jpg
I don't think his will leak either, considering how tightly it will be sucked to the seat, however, I do wonder if they make a hi-lift adapter to remove a seat cushion from ones anus...

'85 4runner: crawler, lockers, swampers, dents
Intrepid is offline  
post #29 of 39 (permalink) Old 10-24-2005, 08:28 AM
Veteran Member
 
awsumdc's Avatar
 
Join Date: Dec 2004
Location: SoCal, O.C.
Posts: 2,813
Quote:
Originally Posted by snowchucker
Height comparison... i may feel small, but at least my o-ring wont leak on a side hill.

http://www.norcalttora.com/~chuck/Be...b/joshsky1.jpg
http://www.norcalttora.com/~chuck/Be...b/joshsky2.jpg
Holy crap that thing is tall. Like I said, that thing is taller than my '05 sitting on 40's.

'05 "SAC" Double Cab TRD Sport 4x4 with Marlin Crawler "Taco" Box and a bunch of other stuff.
Linked, Locked & Large!
"THE BEAST"

AKA "THE BIG SEXY"
Wyatt Scott

3.4 auto crawler install

Installing an FJ Case into an 05+ Tacoma

My Build thread. Building "The Beast"

GOT SAC?
awsumdc is offline  
post #30 of 39 (permalink) Old 10-24-2005, 12:21 PM
Senior Member
 
Tuggs's Avatar
 
Join Date: Apr 2005
Location: Sunnyvale, CA
Posts: 106
Send a message via AIM to Tuggs
Looks like it has potential. Maybe he'll end up selling to someone who'll get rid of the dubs. Slap on some sliders and bumpers and you're in business...

Justin

'03 V6 5spd 4x4 TRD Extended cab
6" Fabtech, OME 881s, Downey HD shackles, Bilstein 5125s, 35x12.50 MT Baja Claw Radials, 4:88s and other stuff
Tuggs is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TTORA Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
Anthony's SAS Big-A Rock Buggy/Truggy Builds 208 08-09-2005 06:55 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome