SAS Parts list links [Archive]

View Full Version : SAS Parts list links

BigBadBob0

11-14-2004, 10:09 AM

This thread is dedicated to storing only posts that have links to parts lists. Anything else will be deleted. PM your questions to specific people.

http://www.toy4x4.net/sas/

supahonkey

12-05-2004, 05:13 AM

http://yotataco.com/SAS/sas.htm

also, download the excel spread sheet, as it is much more accurate, comprehensive, and up to date.

-Brenton

YUNADERIS

12-05-2004, 11:55 AM

seriously
we should sticky mikes site to the top of this folder and direct 95% of the noobs to it

tacodab

12-07-2004, 11:36 AM

seriously
we should sticky mikes site to the top of this folder and direct 95% of the noobs to it
10-4 to that
I got of the tons of info from the and stuff and things..

tacodab

12-07-2004, 11:37 AM

seriously
we should sticky mikes site to the top of this folder and direct 95% of the noobs to it
my list is growing
http://www.tacodab.com/coiloversas.html

dyogim

12-08-2004, 12:55 PM

parts list (http://community.webshots.com/photo/142897778/244928373mOlmld)

joe_mauma

12-15-2004, 10:41 AM

Another parts list... One of these days I'll get around to updating it and posting a price sheet.

http://www.nevadattora.com/axle_swap.htm

dyogim

12-16-2004, 11:58 AM

where did you find your Dorman studs at? I like the idea of staying metric all the way around

You can get them at Kragen

Oppositeboy

12-22-2004, 11:25 AM

http://www.norcalttora.com/~brian/Taco/SAS/index.htm

Live4yotas

12-25-2004, 12:36 AM

Do you say that you had close to 20" of lift on your web page. Just wondering. I think you need to remeasure if this is so.

Valkyrie

12-30-2004, 09:22 AM

T100 parts required for axle swap

4cyl:

12101-75060 Pan
15104-75020 Strainer
15147-75020 Gasket, Oil Strainer
15301-75020 Gage, Oil (Dipstick)
11409-75020 Guide, Oil Gage (Dipstick)
11494-75010 Plate, Oil Hole
91651-60614 Bolts (Oil Hole plate) (QTY: 4)
00295-00103 FIPG (Form in Place Gasket material)

6cyl:

12101-65030 Pan
15104-62060 Strainer
15147-62020 Gasket, Oil Strainer
15301-62060 Gage, Oil (Dipstick)
11452-62060 Guide, Oil Gage (Dipstick)
90405-10033 Union
00295-00103 FIPG (Form in Place Gasket material)

Dirty White Boy

01-03-2005, 12:46 PM

Valkyrie

01-03-2005, 05:58 PM

Is the T-100 3.0 oil pan the same as the T-100 3.4?
The 4x2 oil pan is a 12101-65030 (the exact same as the 3.4l)
the 4x4 oil pan is a 12101-65011 (not the same). Would it work? It will bolt to the engine but as far as your application... I don't know, you'd have to test fit it. It'd be good to know however...

Dick Foster

04-06-2005, 02:38 PM

Not an SAS parts list per se but Dana axle info that is perhaps useful for SAS, Bob. D44 axle service manual and axle parts lists along with Dana axle as used on info for many makes and models. Also R&P setup info that shows the proper pattern and what to do to correct by pattern.

http://www.norcalttora.com/~dick/Dana%20Axle%20Stuff/

Dick Foster

04-06-2005, 02:42 PM

Just so that folks know. The boss on all the later 3.4L engines is not drilled for the T100 dipstick 2WD location so don't bother buying the dip stick stuff. That is unless you can see that your block actually has the rear dipstick boss drilled out. That would be these parts.

15301-62060 Gage, Oil (Dipstick)
11452-62060 Guide, Oil Gage (Dipstick)
90405-10033 Union

Mike

04-06-2005, 02:53 PM

Dick Foster

04-06-2005, 02:58 PM

Yeah, wanna buy a dipstick and tube, cheap. LOL

Front Range

04-12-2005, 04:18 PM

"around 200 model year"

Right around then. Our 8/99 did not have it drilled.

buchshot1

04-12-2005, 07:01 PM

"around 200 model year"

Right around then. Our 8/99 did not have it drilled.
my 98 2.7L doesnt have one either

taco2486

08-10-2005, 07:06 AM

stupid question here why do you have to change all thst stuff around the engine to do the sas swap

Valkyrie

08-10-2005, 07:29 AM

stupid question here why do you have to change all thst stuff around the engine to do the sas swap
Tacoma sumps are in the front. The T100 sump is in the rear, allowing clearance for an axle & linkages.

Bear

08-10-2005, 08:15 AM

Off topic!

Chris are are the pixs of your recent work on the King Taco? would like to see your progress

Valkyrie

08-10-2005, 08:31 AM

No, I have done a piss-poor job at documenting it...

Bear

08-10-2005, 08:33 AM

You mean like me being a pro photographer and not having a singe photo of my own truck?LOL

quit slacking and Git R done! (too much comedy central lately can you tell?)

GOT COPE?

10-14-2005, 02:34 AM

This thread is dedicated to storing only posts that have links to parts lists. Anything else will be deleted. PM your questions to specific people.

http://www.toy4x4.net/sas/

Your link from Mikes page no longer works.
Ronn Ericksons doesnt work.
Steve Nivens' link just leads to a bunch of Marlin Roundup pics.
And Chucks just goes to bent-up.com Wonder why? But seriously.
Supahonkey's page is dead.:dunno:

Just pissed :mad: go ahead and delete my post :neener:

GOT COPE?

12-09-2005, 02:37 PM

Any way to get the links updated so they work??? Doing some research here, and I'd love to look through those links.
And I'll delete this post after the links are fixed... ;)

Bob's page is alive just the link off Mikes site doesnt work last I checked.

start here: http://www.norcalttora.com/~brian/Taco/SAS/index.htm tons of info here and off the links

Bob's: http://www.norcalttora.com/~bob/

more: http://www.tacodab.com/
http://www.nevadattora.com/axle_swap.htm
http://77cj.littlekeylime.com/web_rs44.html
http://www.watrd.com/
http://tacominator.com/tacominator/3%20link.htm

02tacotim

01-06-2006, 06:57 AM

-1988 Dana 44 Grand Wagoneer axle with new i/o seals, yukon 4.88's, spicer 5-760 u-joints, calipers, rotors, pads, spring perches, knuckles rotated with 800 miles on it after rebuild from TTORA member local pick up
$650
-Yukon 4340 Chromoly axle shafts from fourwheelsupply.net shipped
$400
-Dana 44 ARB Air Locker from SAC'd Tundra here at TTORA shipped
$425
-Longfield 300m U-joints shipped
$278
-Rancho 44044 leaf springs/bushings barely used from pirate member shipped
$210
-4 degree spring shims shipped from PORC
$21
-Crane High Clearence Dana 44 diff cover shipped from PORC
$155
-Bilstein 14" travel 5125's X 4 shipped from "allshocks.com"
$302
-91 Toyota 4wd steering box/shaft from NC4x4 member
$100
-Steering box rebuilt and ported for hydro assist with new sector shaft
from PSC motorsports shipped
$272
-Sky Manufacturing Low rise billet pitman arm
$135
-Power steering lines/AN fittings shipped from Bent-Up
$75
-Hi-Steer set-up from Parts Mike shipped
$275
-Oil pan swap parts from Barb at Toyota of Dallas shipped
$168
-Steering stabilizer kit shipped from PORC
$68
-Stainless steel leaf spring hardware from Lowe's
$36
-Dana to Toy drive shaft adapter shipped from High Angle Driveline
$99
-12" Long travel Driveshaft from High Angle Driveline shipped
$300
-All metal work, fabrication, IFS cutoff by Michael at RockdustFab
$1000
-Alcan 8" custom rear springs shipped
$680
-Rear shock relocation by Rockdustfab
$200

dyogim

04-12-2007, 10:12 AM

I purchased a rebuild kit for my 93 4WD steering box, part #04445-35130. I'm hoping this is the kit I need. Anyways, I've also included a pdf file that shows the instructions on how to rebuild the steering box. Hope this helps!

http://www.tundrasolutions.com/photopost/data/552/gearhousing4WD.pdf

4runnerluver

08-12-2007, 08:34 AM

can you repost that parts list.. for some reason your link will not open... thank you

dyogim

08-13-2007, 12:52 PM

can you repost that parts list.. for some reason your link will not open... thank you

Who are you referring to?

MX Dude

11-01-2007, 12:18 AM

Bob's page is alive just the link off Mikes site doesnt work last I checked.

start here: http://www.norcalttora.com/~brian/Taco/SAS/index.htm tons of info here and off the links

Bob's: http://www.norcalttora.com/~bob/

more: http://www.tacodab.com/
http://www.nevadattora.com/axle_swap.htm
http://77cj.littlekeylime.com/web_rs44.html
http://www.watrd.com/
http://tacominator.com/tacominator/3%20link.htm

what happened to brian's page? that was the best one i've seen so far. he had some excellent write ups. is there anything else comparable out there?

lbz134

04-01-2008, 11:16 AM

Well thought Id finally throw in my parts list... This covers almost every dime.. Except broken and replaced parts... But should give people a real good idea of how much a SAS really will cost!!

http://i35.photobucket.com/albums/d185/lbz134/SASPARTSLIST2.jpg

blown4runner

05-16-2008, 06:04 PM

Here is my parts list for my D44 leaf sprung swap on a 2003 Tacoma:

D44 AXLE BUILD UP:

D44 AXLE, SEALS, BEARINGS, CALIPERS, ROTORS [$525.00]
GEAR INSTALL (GEAR WORKS: SAN LEANDRO) [$350.00]
ARB AIR LOCKER - RD116 [$680.00]
MASTER INSTALL KIT - YK D44 [$75.00]
YUKON 5:38 GEARS - YGD44538 [$190.99]
YUKON CHROMOLY AXLE SHAFT KIT - YA W24138 [$402.00]
CTM U-JOINTS (2) - 5-297x [$358.00]
WARN MANUAL HUBS - 20990 [$80.00]
RIDDLER DIFF COVER [$99.95]
HI ANGLE DRIVELINE DANA 44 TO TOYOTA DRIVESHAFT ADAPTOR [$100.00]

SWAP PARTS:

RANCHO 44044 SPRINGS (2) [$300.00]
BILSTEIN 7100 SERIES SHOCKS - AK7114SB04 [$358.00]
T100 OIL PAN - 12101-65030 [$80.00]
T100 OIL PICK UP TUBE - 15104-62060/GASKET - 15147-62020 [$40.00]
T100 OIL DIPSTICK - 15301-62060 [$15.56]
T100 OIL DIPSTICK TUBE - 11452-62060
T100 OIL DIPSTICK TUBE - 11452-62060 [$23.65]
T00 OIL DIPSTICK TUBE UNION - 90405-10033 [$7.58]
BENT UP SHOCK HOOPS
20FT 1/4 PLATE STEEL [$60.00]
RUFF STUFF SPRING PAD [$29.00]
RUFF STUFF U-BOLTS AND PLATE [$65.00]

STEERING COMPONENTS:

PARTS MIKE TIE ROD/DRAG LINK ASSEMBLY - 1PM-TRDA100 [$269.00]
PARTS MIKE HIGH STEER ARMS/KNUCKLE KIT - 1SP1001KK [$699.00]
PARTS MIKE STEERING ARM SPACER [$107.00]
MARLIN CRAWLER STEERING STABILIZER - MC-13548 [$79.00]
MARLIN CRAWLER STEERING BOX - MC-13551 [$299.99]
PARTS MIKE 3/4 LESS DROP PITMAN ARM [$80.00]
AN TO METRIC ADAPTER FITTING - EAR 9919DF JERL (2) [$24.00]
P/S HOSE END - EAR 134606ERL [$19.00]
P/S HOSE END - EAR 139106ERL [$18.00]
P/S HOSE - EAR-131006ERL [$69.00]
TRANNY COOLER FOR STEERING LINES - MOR-41200 [$72.88]
BORGESON STEERING SHAFT [$225.00]

MISC/OTHER PARTS:

ARB AIR COMPRESSOR - RDCKA-12 [$189.00]
GOODYEAR MT/R 37/12.5R15 (4) [$750.00]
15X8 W/2.5" BACKSPACING STEEL WHEELS W/CUSTOM ROCK RINGS [$350.00]
YUKON 5:29 GEARS (TOYOTA) - YGTV6529 [$159.99]
GEAR INSTALL (GEAR WORKS: SAN LEANDRO) [$200.00]
JT'S SOLID PINION SPACER W/SHIMS (SK CSTV6) [$32.95]
TOYOTA E-LOCKER MASTER INSTALL KIT [$169.99]

TOTAL: $7,798.90

The rear end suspension was completed well before the swap using 63" Chevys with an AAL, Bilsteins, Ruff Stuff shocks relocation components and modifying the shackles from the Toyota leafs.

There are still some things that need to be completed after the shakedown run. And some of the little things are not listed, but then again those are parts specific to your swap.

COMPANIES I RECOMMEND DOING BUSINESS WITH:

BENT UP (http://bentup.com)
PARTS MIKE (http://www.partsmike.com)
RUFF STUFF (http://www.ruffstuffspecialties.com/catalog/index.php)
MARLIN CRAWLER (http://www.marlincrawler.com/)
TOYOTA OF DALLAS (http://www.trdparts4u.com/)
HI ANGLE DRIVELINE (http://www.highangledriveline.com/)
SUMMIT RACING (http://www.summitracing.com/)
ALL JEEP (http://www.alljeep.com/)
JUST DIFFERENTIALS (http://www.justdifferentials.com/)