PDA

View Full Version : front brake lines question

Big-A
06-08-2005, 11:01 PM
I havent seen very much info on the proper brake lines to use that will work with the waggy calipers when sasing,do I need to order a stainless steel extended waggy brake line or can I just order this //www.aor4x4.com/braidedbrakelines.htm (http://www.aor4x4.com/braidedbrakelines.htm)


Is there anything else I need....any suggestions,thanks.
Brain
06-09-2005, 02:01 AM
I just bought a Pro Comp kit from Summit for a 4" lifted Tacoma.
Timbuddha
06-09-2005, 07:46 AM
Front range has a nice set. I would go with his.
gambrinus
06-09-2005, 08:38 AM
Here is one option:
http://www.frontrangeoffroadfab.com/brake_hoses.htm

later!
shane
zszac111
06-09-2005, 09:11 AM
these should be kick ass. http://www.pirate4x4.com/forum/showthread.php?t=291865&highlight=teflon+brake+line , im about to order me up some.
TACORICAN
06-09-2005, 10:08 AM
How long should the Front and the Rear be?
aor4x4
06-09-2005, 10:21 AM
I havent seen very much info on the proper brake lines to use that will work with the waggy calipers when sasing,do I need to order a stainless steel extended waggy brake line or can I just order this //www.aor4x4.com/braidedbrakelines.htm (http://www.aor4x4.com/braidedbrakelines.htm)


Is there anything else I need....any suggestions,thanks.

our lines will fit the D-44 calipers with the 3/8" Banjo. We've found some D-44 calipers have a 7/16" banjo, so you'll need to double check. If that is the case, let me know and I can change out the banjo fittings to the ones that fit your calipers. Our lines are 24" long for the front, and 18" for the rear in the standard Tacoma brake line kit. If you need 24" lines for everything I can do that too..
Big-A
06-09-2005, 06:37 PM
I just bought a Pro Comp kit from Summit for a 4" lifted Tacoma.

sweeeet....hey Brian I forgot to ask you the other day,where did you get your front bumper? I noticed it when I saw your truck.......that bumper is pretty close to what I had in mind! Looks good!
Big-A
06-09-2005, 06:40 PM
these should be kick ass. http://www.pirate4x4.com/forum/showthread.php?t=291865&highlight=teflon+brake+line , im about to order me up some.

mmmmmmmm those are beefy,I do like them! as Tim the tool man would say arrrrr ar arr arrrr arrrrrrrrrrrr thanks for the info!
Big-A
06-09-2005, 06:41 PM
our lines will fit the D-44 calipers with the 3/8" Banjo. We've found some D-44 calipers have a 7/16" banjo, so you'll need to double check. If that is the case, let me know and I can change out the banjo fittings to the ones that fit your calipers. Our lines are 24" long for the front, and 18" for the rear in the standard Tacoma brake line kit. If you need 24" lines for everything I can do that too..

Thanks for the info......I like the kit,and the springs for the brake lines!
Brain
06-09-2005, 09:01 PM
sweeeet....hey Brian I forgot to ask you the other day,where did you get your front bumper? I noticed it when I saw your truck.......that bumper is pretty close to what I had in mind! Looks good!

Hey Anthony, I actually made it myself :D It's not quite finished, I bought some LED blinkers that I'm going to inset into the round tube. Then once that's finished I'm going to get some sheet aluminum and cover up the top part so you can't see all my crap inside.
Big-A
06-09-2005, 09:12 PM
Hey Anthony, I actually made it myself :D It's not quite finished, I bought some LED blinkers that I'm going to inset into the round tube. Then once that's finished I'm going to get some sheet aluminum and cover up the top part so you can't see all my crap inside.

.....kick ars,good job dude! I thought it was a BentUp bumper! Sweet!