parts run to Missouri

[79coyotefrg]

ive sold a "chunk" of parts to OddMar in Illinois, he's going to meet me at extremetoy2000's house and then i think i'm going to go by Flat Nasty on the way home, since ive never been there. Anyone want to ride along :dunno: (convoy) this (if plan works) will be on December 7th, (next saturday)

[AR81Toy]

You driving the truck or the burban ?

[79coyotefrg]

i'll be driving my truck, pulling a trailer

[extremetoy2000]

Just to let you know Glen The 7th is a Sunday.

[79coyotefrg]

Just to let you know Glen The 7th is a Sunday.

really? oh well, December 7th 1941,http://i220.photobucket.com/albums/dd137/79coyotefrg/smilies/usa.gif they stood for us, http://i220.photobucket.com/albums/dd137/79coyotefrg/smilies/usa.gif

i can make the trip and stop by and see Dad on the way there or back

[Jordan7118]

Hmmmm.... You goin' through Fayetteville? MAYBE

If you need something and you're in the neighborhood, holla.

[Arky Tacoma]

Glen,
You've got PM:)

[79coyotefrg]

Hmmmm.... You goin' through Fayetteville? MAYBE

If you need something and you're in the neighborhood, holla.

looks like i might be coming back thru there :dunno:

what ya got ??

Cory you here?? i need to know where you are

[colsoncj]

ya im here! I live in Monett, MO. The tranny is in Springfield. I can have it in either town, whatever works best!

[79coyotefrg]

ya im here! I live in Monett, MO. The tranny is in Springfield. I can have it in either town, whatever works best!

how far are you from SMORR??

[domino]

I think it would be easiest for you to come back through Springfield and meet Cory there. Then you could run back down 65 to Conway.

Here's a map if it will work.

http://www.mapquest.com/mq/1-UsL3

[79coyotefrg]

thanks man, that helps, i guess i should figure out a good route and plan cause i dont want to be wondering around missouri and find a bunch of strange people like ----> THAT
http://i220.photobucket.com/albums/dd137/79coyotefrg/smilies/DTBspecialchildhat-1.jpg




http://i220.photobucket.com/albums/dd137/79coyotefrg/smilies/yikes.gif

[Yota1]

Well Glen you had better stop by here on you way back home :neener: I'm almost half way.

[79coyotefrg]

looks like my plan is going to change, i will be going up hwy 65 straight to Seymour/springfield, hook up with cory for the trans , then go by SMORR, and get pics, look around for hotels and other lodging, maybe try some cheap motels :dunno:

then on to stlouis on sunday, if i dont drive on up saturday, depends on how i feel

sucks to have to pull the trailer all that way but oh well, it wont weigh much

[colsoncj]

sounds good glen... If I cant make it up to springfield when you're there, I'll have you hook up with my mother, shes the one that has the trans anyway.

I was kinda hoping you'd swing by the house in Monett, I was going to attempt to sell you all the remaining parts I had for a killer deal :)

[extremetoy2000]

sounds good glen... I'll have you hook up with my mother

:eek: somebody is pimpin' out their mother?

[colsoncj]

lol... with this bad economy, you gotta do what you can!

[79coyotefrg]

lol... with this bad economy, you gotta do what you can!well whats 'Mom' look like http://i220.photobucket.com/albums/dd137/79coyotefrg/smilies/d055.gif

Monett over by Neosho?? south of Joplin ??

[79coyotefrg]

ok, another change in route plan :aahg:

[colsoncj]

Monett is inbetween neosho and springfield, closer to neosho. all three are on us 60.

[colsoncj]

just let me know what and when... the trans and t-case are in springfield right now, lemme know if i need to haul them out to monett.

[YotaJosh]

Cory - do you still have some of those driveshafts? 84-95 style? Front or rear doesn't matter, I just want the ends. I can paypal you the money.

Glen - if you're going by there, could you snag one or 2 for me? :D

[colsoncj]

I think I have a couple front IFS shafts. But if I talk Glen into buying all my parts, you'll have to get them from him :)

I'll check tonight and see what i have, they're sitting in the back yard right next to the door, so it should be easy and quick to see.

[79coyotefrg]

I think I have a couple front IFS shafts. But if I talk Glen into buying all my parts, you'll have to get them from him :)

I'll check tonight and see what i have, they're sitting in the back yard right next to the door, so it should be easy and quick to see.

Cory, how much you want for these parts?? and what all ya got??

i dont really have any extra money besides for gas and a hotel :dunno:

[79coyotefrg]

man, decisions suck. this is the route i'll take if i go to Cory's http://www.mapquest.com/maps?1c=Arkadelphia+&1s=AR&1z=71923&2c=Cedar+Hill&2s=MO&r=s#a/maps/l::+SR+26;+Highway+26+W;+Ar+26+W+:::::34.095764:-93.17427:::1/l::+I+540+E;+US+71+N+:::::35.429721:-94.334846:::2/l:::Monett:MO::US:36.928902:-93.927498:city:Barry+County:1/l::+US+60+E+:::::37.114238:-92.101142:::2/l::7351+Windcrest+Dr:House+Springs:MO:63051-2916:US:38.388017:-90.602742:address:Jefferson+County:1/l:::Arkadelphia:AR::US:34.1208:-93.053596:city:Clark+County:1/m:::::0:::::/io:1:::::s:EN:M:/e

[79coyotefrg]

i'll be meeting Thad Brown (TLCA) over at SMORR sometime saturday evening.
oh man, i gotta get moving early sat morning :thud:

[colsoncj]

I dunno on the price for the parts, it was around $350 for everything but the complete front axle and a couple other really small things, IIRC. Theres at least that much in axle housings, t-cases, EFI and carb stuff. I'd give ya a list, but I really have no idea whats left... Its at least enough to fill a 16' trailer. some of the big stuff is carb setups, EFI intakes/sensors etc..., front axle housings rear axle housings, rotor/hub stuff, ring and pinions, radiator fans, fan shrouds, grilles, glass, interior parts, forward shift t-cases, couple older cast iron trannies, AFMs, 22RE block, a door, a fender, and so on...

[79coyotefrg]

ok, i'll see ya saturday, um pm me your address or pm me directions to your house, i'll be coming up hwy 37

[Jordan7118]

Glen, buy it all. You could possibly talk Cory into a payment plan. Then you could peddle that crap for a long time :)

Why are you going all this way for parts anyways? What you getting from who?

How's it coming with the Paypal thing? Shoot me a PM if need be.

[79coyotefrg]

Glen, buy it all. You could possibly talk Cory into a payment plan. Then you could peddle that crap for a long time :)

Why are you going all this way for parts anyways? What you getting from who?

How's it coming with the Paypal thing? Shoot me a PM if need be.

i'm not buying i'm selling a chunk of parts off that 4runner :woot:

[79coyotefrg]

i'll be at Cory's saturday afternoon, Cory dont let me forget to pick up Lances trans :aahg:

[colsoncj]

will do...

[OldTruck]

Glen,
looking at your route, I'd bet good money that coming back south, you'd be quicker to use I-55. However, if you're just taking your time, exploring the country side, the hwy 67 route would be the ticket. Additionally, since you are coming through NE Arkansas, don't forget to call if you need help. Feel free to come through Paragould / Jonesboro area if you have time. I'll be around j'boro this coming weekend.
OldTruck

[extremetoy2000]

Ain't it peculier how every other major city(s) in the country are linked by a major Interstate highway except Little Rock and St. Louis?

[79coyotefrg]

thanks Stacy, i plan on stopping in Paragould and see Michaels new place, he just doesnt know it yet :rofl:

[colsoncj]

Glen, sorry I wasnt around, I ended up having to run to springfield around 4ish... Glad we did work something out though. I'm lucky to have great neighbors!

did you get to check out SMORR or flat nasty?

[79coyotefrg]

Glen, sorry I wasnt around, I ended up having to run to springfield around 4ish... Glad we did work something out though. I'm lucky to have great neighbors!

did you get to check out SMORR or flat nasty?

no, the dang trailer problems screwed up my entire trip

i didnt get to visit Thad, but i did get to visit with the owner of SMORR

I'm at Steve's in StLouis right now, waiting on Oddmar to show up

DANG ITS COLD

[colsoncj]

well sorry to hear you had problems. I do feel bad about missing ya.

When are you coming back through? Maybe we could get together and finally meet face to face.

[colsoncj]

I also forgot to mention, you shoulda grabbed the shifters too. Adn I have a couple driveshafts, I think Josh wants one of them.

[domino]

When you get back let us know how the trip to SMORR went. I'm wanting to run up there early next year to hit some trails.

[79coyotefrg]

well sorry to hear you had problems. I do feel bad about missing ya.

When are you coming back through? Maybe we could get together and finally meet face to face.

i'm thinking we should plan a run on SMORR in feb or march, maybe a 3 day weekend :dunno:

[79coyotefrg]

When you get back let us know how the trip to SMORR went. I'm wanting to run up there early next year to hit some trails.

i got to SMORR at 10 pm, i didnt get to see much but theres a bath house, comparable to hotsprings and a kitchen :thumbs:

[79coyotefrg]

store and town 6 miles from park, hotels too

he has 8 rv hookups and endless tent camping

from the lay of the land up there i'm excited