HP and torque ratings

[Blue Coyote]

Looking for HP and torque ratings for the 2.7 and 3.4. Power curves would be GREAT if anyone has some. Also looking for red line # 's as well.
BC

[boosted]

i have my dyno sheet, i can email it to you

[YoTRacer158]

i think the the stock 3.4's have about 150rwhp, the supercharger only 3.4's are at about 200rwhp, and the URD/Supercharged 3.4's i've seen anywhere from 225-250rwhp

[Blue Coyote]

Boosted, that would be great.
bluecoyoteracing@earthlink.net :)

[ShowStop]

Looking for HP and torque ratings for the 2.7 and 3.4. Power curves would be GREAT if anyone has some. Also looking for red line # 's as well.
BC
The stock HP and torque ratings for both the 2.7 and 3.4 are listed in this thread:
www.tacomaterritory.com/forum/showpost.php?p=12425&postcount=3

[DakotaTacoma]

The stock HP and torque ratings for both the 2.7 and 3.4 are listed in this thread:
www.tacomaterritory.com/forum/showpost.php?p=12425&postcount=3


Are there any graphs so we can determine what 'real world' HP would be.
I don't know about you, but I rarely, if ever rev up to 4,800 to 5,200 RPM....
So the 160 for the new engine and 150 for the old are not real in my-oh-so- humble-opinion :)

[Blue Coyote]

Are there any graphs so we can determine what 'real world' HP would be.
I don't know about you, but I rarely, if ever rev up to 4,800 to 5,200 RPM....
So the 160 for the new engine and 150 for the old are not real in my-oh-so- humble-opinion :)

In my case the engine will see red line constantly<if needed>. Charts / graphs would be great to see where peak HP / torque are. This helps in gearing and set up. Big #'s at 4800 and 3600 are nice. I have a dyno chart for a SC motor, but mine will have to be non-SC'd