: Project Angry


Mike
07-04-2005, 03:16 PM
It's a bit of a heap right now, but after an axle swap, a couple lockers, a crawler, some tires, and a little armor it will be a wheeling machine!

Later,
....Mike

http://miker.servebeer.com/%7Emike/project_angry/project_angry_001.jpghttp://miker.servebeer.com/%7Emike/project_angry/project_angry_002.jpg
http://miker.servebeer.com/%7Emike/project_angry/project_angry_003.jpg
http://miker.servebeer.com/%7Emike/project_angry/project_angry_004.jpg

Kyoteh
07-04-2005, 03:40 PM
It's a bit of a heap right now, but after an axle swap, a couple lockers, a crawler, some tires, and a little armor it will be a wheeling machine!

Later,
....Mike


Cool! He broke down and got it! Can't wait to see what you guys do to it! :)

AngryAndy
07-04-2005, 03:50 PM
It's a bit of a heap right now, but after an axle swap, a couple lockers, a crawler, some tires, and a little armor it will be a wheeling machine!

Later,
....Mike




Thanks for the ride out there to get it! :D

Now, lets turn OFF our PC's and go tear it apart! :saw: :welder: :saw: :welder:

Damn fawking heat makes me Angry....and lazy....

Zackattak
07-04-2005, 05:55 PM
Thanks for the ride out there to get it! :D

Now, lets turn OFF our PC's and go tear it apart! :saw: :welder: :saw: :welder:

Damn fawking heat makes me Angry....and lazy....

Have you guys started tearin it up yet? :saw: :welder: hey if you guys need another laborer let me know! i'll be back the 9th.

Ted
07-04-2005, 06:19 PM
At least my junk is one color, and has a solid axle already :D

http://pictures.uu4x4.net/albums/album114/IMG_6116_Large.sized.jpg

Mike
07-04-2005, 06:23 PM
At least my junk is one color, and has a solid axle already :D

http://pictures.uu4x4.net/albums/album114/IMG_6116_Large.sized.jpg

Didja build that bed to haul hay or something? :D

Later,
....Mike

dyogim
07-05-2005, 09:41 AM
Let me know when you guys starting cutting it up and I'll help out in whatever I can. Just got to get my junk fixed first.

I should be getting all the papers today. So, I'll most likely come by tomorrow afterwork. I can also pick up 'little boy blue' to get it serviced and Mike, I'll bring over the hub and switch those out from you.

hytenor
07-05-2005, 11:15 AM
It's a bit of a heap right now, but after an axle swap, a couple lockers, a crawler, some tires, and a little armor it will be a wheeling machine!

Later,
....Mike


Monster Garage!

let me know when you need a torch, hee, hee.

dyogim
07-05-2005, 11:47 AM
Thanks for the ride out there to get it! :D

Now, lets turn OFF our PC's and go tear it apart! :saw: :welder: :saw: :welder:

Damn fawking heat makes me Angry....and lazy....

Hey Andy, my friend just called me up and left some Porsche seats in the back of the runner. I need to pick those up when I come by tomorrow.

hytenor
07-05-2005, 12:00 PM
Hey Andy, my friend just called me up and left some Porsche seats in the back of the runner. I need to pick those up when I come by tomorrow.

I here they are for sale now, LOL

hytenor
07-05-2005, 12:01 PM
At least my junk is one color, and has a solid axle already :D

http://pictures.uu4x4.net/albums/album114/IMG_6116_Large.sized.jpg

nice racing stripes.

dyogim
07-05-2005, 12:05 PM
I here they are for sale now, LOL

LOL! I just talked to him on the phone.

tacodab
07-05-2005, 03:23 PM
Andy!!!!
sweeeet
now I have to stop working on the taco and start working on the "beast" I have :)

Dick Foster
07-05-2005, 03:46 PM
Why, can't you multitask?

Ted
07-05-2005, 03:52 PM
nice racing stripes.


It's going to be me and Brian's ride to takeover :)

hytenor
07-05-2005, 03:54 PM
It's going to be me and Brian's ride to takeover :)

Ooo, cushy :p

Oppositeboy
07-05-2005, 04:22 PM
It's going to be me and Brian's ride to takeover :)

Make sure you keep the doors on... :flipoff3:

jrizman
07-05-2005, 05:19 PM
sure, wait till i move out and its the middle of summer.
with you two unmotivated fukrs shit will not get done till winter :)

HAHA

much love, have fun!

Mike
07-05-2005, 06:32 PM
sure, wait till i move out and its the middle of summer.
with you two unmotivated fukrs shit will not get done till winter :)

HAHA

much love, have fun!

You know us well!

Move back here and motivate our project. :D

Later,
....Mike

jrizman
07-05-2005, 08:11 PM
shit, i cant deal with the asshats anymore man, wayyyyy to stressful. if you ever get outta the bay youll never wanna go back!

well, ill get me a place up in the mts and you can store all your tools, equipment and rigs up there! even spare parts too, just so they can be nearer the trail ;) hehe

damn it, i wanna work on that POS and then drive the hell outta it. give me a few years and ill hopefully have one too!

da kayla misses ya, actually me cause i am the sole ball thrower, fukin drive me nutz!

have fun on the ruby, hope the rig treats ya well, peace!

AngryAndy
07-05-2005, 08:36 PM
sure, wait till i move out and its the middle of summer.
with you two unmotivated fukrs shit will not get done till winter :)

HAHA

much love, have fun!


WINTER????


Your SOOO right!...we will be lucky if it is anywhere near done by NEXT winter!!!!!

PappaF2
07-05-2005, 10:21 PM
good buy andy! I really like that body style of 4 runner. So whats the plans for it??????? :xdevil:

AngryAndy
07-05-2005, 10:31 PM
good buy andy! I really like that body style of 4 runner. So whats the plans for it??????? :xdevil:


go cheap, but go with decent stuff...SAS,lockrights, crawler...half doors, lotsa armor (like a full exocage with halo)...something I can roll and not worry about driving home in........a dent magnet!!!!!!!!! Oh yeah, maybe an Angry Blue color...

Mike
07-05-2005, 10:32 PM
good buy andy! I really like that body style of 4 runner. So whats the plans for it??????? :xdevil:

I can't speak for Andy, but I think the plan is to make it into a very basic, no-frills, trail beater.

Like rip out all the interior and rhino-line it, waterproof it for Fordyce type stuff, build a drivetrain that can survive difficult trails, etc.

Oh yeah, and the gay rosy-red sunroof needs to go ASAP. I will not be seen driving that rig until it is gone. :D

Maybe use it as a wrenching/learning project for local newbies?

Later,
....Mike

zosimov21
07-06-2005, 09:04 AM
Wish I was local, I'd love to see how to cut the IFS off and put in all the good stuff. I need more wrenching lessons.

dyogim
07-06-2005, 10:09 AM
Oh yeah, and the gay rosy-red sunroof needs to go ASAP. I will not be seen driving that rig until it is gone. :D

Later,
....Mike

That just adds to the "Angry Andy" characteristics. Red color face = boiling blood = angry andy or (hammered Andy)

dyogim
07-06-2005, 10:16 AM
My friend who owned the runner has a rear axle from another runner at his place. Not sure what the specs are but, might be able to use it as a spare or for parts. Just a thought.

AngryAndy
07-06-2005, 06:55 PM
Oh yeah, and the gay rosy-red sunroof needs to go ASAP. I will not be seen driving that rig until it is gone. :D

Maybe use it as a wrenching/learning project for local newbies?

Later,
....Mike


How about a gay angry blue color sunroof????

Would you thrash in it then? I bet you would, if you have enough beers in ya....and not those lightweight beers...im talking bout the good ones....

I am all for newbies coming and getting dirty. I agree with ya, not because like John will say "I am lazy" but cause when I was a newbie....fuck I was never a newbie...but there are tons of people that would love to watch, help, get dirty....but I have the feeling we would all end up drinking and watching wheeling videos in the living room and fighting over who will sit in the massage chair....but that still sounds like fun to me!

AngryAndy
07-06-2005, 06:58 PM
That just adds to the "Angry Andy" characteristics. Red color face = boiling blood = angry andy or (hammered Andy)


Oh now you are characterizing me....(sorry rizman, i spelted it wrang)

but I think your math is correct....but only The Dick would know. Somehow then 'hammered Andy' is also equal to the red colored face; so therefore, the angry andy equals hammered andy? now even I am confused!

AngryAndy
07-06-2005, 07:03 PM
Wish I was local, I'd love to see how to cut the IFS off and put in all the good stuff. I need more wrenching lessons.


Fly out. I am sure we can arrange a date to fit your schedule...you would come home a SAS god....and your neighbors would soon hate you also! Remember, this is NorCal...and you would see a LOT of rigs here for sure!

jrizman
07-06-2005, 07:12 PM
hey, at least you are making an effort, A+
hahaha

as for ghey, you are it no matter what the color. youre not lazy, just impared too often :D

Itll get done, but i remember last summer when none of us were outside in the evening cause it was sooo fukin hot. id bet youre there already.

PS someone is on her way out here this week, im gonna have to come get that shit some other time :( maybe ill get ya to box it up or some shit, but my apt is full of boxes for now.

AngryAndy
07-06-2005, 07:29 PM
hey, at least you are making an effort, A+
hahaha

as for ghey, you are it no matter what the color. youre not lazy, just impared too often :D

Itll get done, but i remember last summer when none of us were outside in the evening cause it was sooo fukin hot. id bet youre there already.

PS someone is on her way out here this week, im gonna have to come get that shit some other time :( maybe ill get ya to box it up or some shit, but my apt is full of boxes for now.


Enjoy your week....but WHAT shit are you talking about???

Tell her I said "hola como estas...y ardilla!!!!" ok for those white people, i said hello, whats up, and SQUIRREL!.......NorCal spanglish.....

And I have not been impared much since you left....thats good, and bad :mad:

Mike
07-06-2005, 09:41 PM
Day three, the paint job.

Later,
....Mike

http://miker.servebeer.com/%7Emike/project_angry/project_angry_005.jpg

tacodab
07-06-2005, 09:45 PM
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ $$$$$$$$$$$$$$$$$$

04RedLobster
07-06-2005, 09:56 PM
very clean paintjob!

hytenor
07-07-2005, 12:34 AM
I am all for newbies coming and getting dirty.

heck, that's what noobs are for, LOL

Brain
07-07-2005, 10:44 AM
Looks good enough :D When you do those half doors, just remember that welding sheet metal sucks ass! I was in the process of making some for my friends 85 4Runner but never got around to finishing them.

Dick Foster
07-07-2005, 11:19 AM
Why am I being dragged into this? STFU

tacodab
07-07-2005, 11:22 AM
just dont reply. you are only saying that cuz you want to be dragged into it

Dick Foster
07-07-2005, 12:03 PM
Who asked you for your opinion. You STFU too. LOL

hytenor
07-07-2005, 01:11 PM
Looks good enough :D When you do those half doors, just remember that welding sheet metal sucks ass! I was in the process of making some for my friends 85 4Runner but never got around to finishing them.

they'll just have Steve do the half doors ;)

jrizman
07-07-2005, 06:09 PM
Enjoy your week....but WHAT shit are you talking about???

Tell her I said "hola como estas...y ardilla!!!!" ok for those white people, i said hello, whats up, and SQUIRREL!.......NorCal spanglish.....

And I have not been impared much since you left....thats good, and bad :mad:

fukin nice paint job, i knew youd break out the rattle cans! haha

my coffee pot and my rotors.

that rig better be trail worthy by the time i get out there next!

Reebles
07-11-2005, 04:55 PM
Yea..let's take care of this Monster Garage style :)

Zackattak
07-17-2005, 05:32 PM
I saw it yesterday and Andy finished it and it looks great

Reebles
07-17-2005, 07:35 PM
I saw it yesterday and Andy finished it and it looks great


yep..I saw it too...looks kickass ;)

hytenor
07-17-2005, 09:54 PM
I saw it yesterday and Andy finished it and it looks great

Geeze, that was quick. :saw:

noclinkers
07-17-2005, 10:21 PM
Hey angry, if you are going to ditch the interior, I might have some parts you need. Let me know. Bob

Edit: nice rims!

AngryAndy
08-25-2005, 07:54 PM
Hey Dean.......

Lets crap this thread instead!

Strobe dancing on BR...you cant dance, your leg is fawked. We need to have a strobe video taken of US doing the impenatrable defense fight against each other. Now that will be cool!!!! and another with stereo sirens.

Project Angry is progressing....

I actually SMOGGED it....and did the brake and lamp check. Got all the needed papers now, just need to take them into the DMV and have them check the VIN and I will get a plate.....I am TRYING to think of a good custom plate for the runner...like 4ANGRY...or ANGRYRNR.

And then I got the rear window to actually move up and down! Fuck these runners have three saftey switches....one checks the rear door to make sure its closed, one checks the rear windshild wiper to make sure its NOT on the window, and one checks to see if the top is bolted down....fuck it took all day to figure out how to get it working again......

AngryAndy
08-25-2005, 07:57 PM
Hey angry, if you are going to ditch the interior, I might have some parts you need. Let me know. Bob

Edit: nice rims!


Damn Bob, I missed this post.

I was NOT going to ditch the interior.....ORIGINALLY...but now I start working on it...I think I am going to ditch all interior parts...carpet, door/side panels from dash to rear window....almost everything from the dash down to the rear of the rig....also looking on pirate at bobbing the bed...(funny....i said 'bob' talking to "bob"!)

I need to find a pic of a stocker interior...I have 3 switches in the console, and dont know what one of them should be....

tacodab
08-25-2005, 08:07 PM
just do it!!
fucking pull that shit apart
you dont need windows
pull all the insides out and just linex the thing for water crossings
then you better build a fucking huge ass rollcage for that thing with 5 point seat belt harness things and then you can start doing other stuff.

I need to do some bills then eat then fucking get some sleep. crap I am tired :(

terryjmatthew
08-25-2005, 08:16 PM
That purple door was awesome! Why did you paint it?LOL
Good luck w/ the build.

AngryAndy
08-25-2005, 08:42 PM
just do it!!
fucking pull that shit apart
you dont need windows
pull all the insides out and just linex the thing for water crossings
then you better build a fucking huge ass rollcage for that thing with 5 point seat belt harness things and then you can start doing other stuff.

I need to do some bills then eat then fucking get some sleep. crap I am tired :(


I know, I am wasting my time getting the windows to work...

BUT I want two sets of doors, half doors for summer/no top and full doors for when i drive it to work in the Ghetto....

I dont need Line-x either, thats more $$$ I dont wanna spend..I need 1500 for lockers/gears front and rear, let alone the axle itself and the SAS kit and the hysteer stuff, and the exocage, and the gold paint, and the new hoses for the motor, and the headgasket, and the head work at the machine shop, and the new timing chain, injectors, cromo shafts...the list goes on and on....

noclinkers
08-25-2005, 10:39 PM
Hey andy, I have lots of parts including a front end. I will post up tomorrow. Just got a tooth pulled and I am going to take some Vicodin and go to bed. See ya, Bob

AngryAndy
08-25-2005, 10:46 PM
Hey andy, I have lots of parts including a front end. I will post up tomorrow. Just got a tooth pulled and I am going to take some Vicodin and go to bed. See ya, Bob


Save your leftover Vicodin's for me..... :p

And give all the family my hello's....Im sure you know where I am going with that! :mad:

ToyofMarin
08-26-2005, 01:30 PM
Looks like a fun project.

tacodab
08-28-2005, 11:21 PM
It's a bit of a heap right now, but after an axle swap, a couple lockers, a crawler, some tires, and a little armor it will be a wheeling machine!

Later,
....Mike

http://miker.servebeer.com/%7Emike/project_angry/project_angry_001.jpghttp://miker.servebeer.com/%7Emike/project_angry/project_angry_002.jpg
http://miker.servebeer.com/%7Emike/project_angry/project_angry_003.jpg
http://miker.servebeer.com/%7Emike/project_angry/project_angry_004.jpg

just take it to mako now and get it painted pink it will be sweet!

tacodab
08-28-2005, 11:23 PM
Save your leftover Vicodin's for me..... :p

And give all the family my hello's....Im sure you know where I am going with that! :mad:
get off line and go work on it now!!!

or finish your taco....or man nachos....yum nachos!!!

tacodab
08-28-2005, 11:23 PM
It's a bit of a heap right now, but after an axle swap, a couple lockers, a crawler, some tires, and a little armor it will be a wheeling machine!

Later,
....Mike

http://miker.servebeer.com/%7Emike/project_angry/project_angry_001.jpghttp://miker.servebeer.com/%7Emike/project_angry/project_angry_002.jpg
http://miker.servebeer.com/%7Emike/project_angry/project_angry_003.jpg
http://miker.servebeer.com/%7Emike/project_angry/project_angry_004.jpg
I want to see pics of the dusy.
tell mike to come home

tacodab
08-28-2005, 11:25 PM
It's a bit of a heap right now, but after an axle swap, a couple lockers, a crawler, some tires, and a little armor it will be a wheeling machine!

Later,
....Mike

http://miker.servebeer.com/%7Emike/project_angry/project_angry_001.jpghttp://miker.servebeer.com/%7Emike/project_angry/project_angry_002.jpg
http://miker.servebeer.com/%7Emike/project_angry/project_angry_003.jpg
http://miker.servebeer.com/%7Emike/project_angry/project_angry_004.jpg
when is the norcal site gona happen?
delphi and squirrel and stuff

tacodab
08-28-2005, 11:25 PM
It's a bit of a heap right now, but after an axle swap, a couple lockers, a crawler, some tires, and a little armor it will be a wheeling machine!

Later,
....Mike

http://miker.servebeer.com/%7Emike/project_angry/project_angry_001.jpghttp://miker.servebeer.com/%7Emike/project_angry/project_angry_002.jpg
http://miker.servebeer.com/%7Emike/project_angry/project_angry_003.jpg
http://miker.servebeer.com/%7Emike/project_angry/project_angry_004.jpg
I need to get some of my own big ass pictures to put here

AngryAndy
08-28-2005, 11:27 PM
get off line and go work on it now!!!

or finish your taco....or man nachos....yum nachos!!!


I think I wlll get some nachos tomorrow.

Yum.

I cant work on either rig. I have a hangnail that wont heal. I might have to call in sick tomorrow. This sucks. I cant even go to the mall, it really hurts.

waitwhyamiaddingspacestomywords?fawkRDPSnodrivesha ftandheadtreavily

tacodab
08-28-2005, 11:27 PM
http://www.norcalttora.com/~dean/dad%20dusy%20pics/DSC00712.JPG

tacodab
08-28-2005, 11:28 PM
I think I wlll get some nachos tomorrow.

Yum.

I cant work on either rig. I have a hangnail that wont heal. I might have to call in sick tomorrow. This sucks. I cant even go to the mall, it really hurts.

waitwhyamiaddingspacestomywords?fawkRDPSnodrivesha ftandheadtreavily

http://www.norcalttora.com/~dean/dad%20dusy%20pics/DSC00713.JPG

AngryAndy
08-28-2005, 11:30 PM
when is the norcal site gona happen?
delphi and squirrel and stuff


Squirrel??? What squirrel??

http://i6.photobucket.com/albums/y238/hjmartin/squirrel.jpg

tacodab
08-28-2005, 11:30 PM
http://www.norcalttora.com/~dean/dad%20dusy%20pics/DSC00714.JPGI think I wlll get some nachos tomorrow.

Yum.

I cant work on either rig. I have a hangnail that wont heal. I might have to call in sick tomorrow. This sucks. I cant even go to the mall, it really hurts.

waitwhyamiaddingspacestomywords?fawkRDPSnodrivesha ftandheadtreavily

tacodab
08-28-2005, 11:30 PM
Squirrel??? What squirrel??

http://i6.photobucket.com/albums/y238/hjmartin/squirrel.jpg
lol that is hella funny

AngryAndy
08-28-2005, 11:31 PM
http://www.norcalttora.com/~dean/dad%20dusy%20pics/DSC00713.JPG


Is that Red Dog???? Sort of-kind of looks like it..

tacodab
08-28-2005, 11:32 PM
http://www.norcalttora.com/albums/album109/aam.sized.jpgSquirrel??? What squirrel??

http://i6.photobucket.com/albums/y238/hjmartin/squirrel.jpg

tacodab
08-28-2005, 11:33 PM
http://www.norcalttora.com/albums/album109/aap.sized.jpg

AngryAndy
08-28-2005, 11:34 PM
http://www.norcalttora.com/~dean/dad%20dusy%20pics/DSC00714.JPG


Reminds me of Soupbowl....the obstacle The Dick could NOT make it thru...

Except I was a little more stuck then you.

tacodab
08-28-2005, 11:36 PM
http://www.norcalttora.com/albums/album109/acz.sized.jpgI think I wlll get some nachos tomorrow.

Yum.

I cant work on either rig. I have a hangnail that wont heal. I might have to call in sick tomorrow. This sucks. I cant even go to the mall, it really hurts.

waitwhyamiaddingspacestomywords?fawkRDPSnodrivesha ftandheadtreavily

AngryAndy
08-28-2005, 11:36 PM
http://www.norcalttora.com/albums/album109/aap.sized.jpg

You rule.

I want my IFS back.

Wait, my 4runner is still IFS. I am going right now to Dusy...Do you think i can catch up to them?

tacodab
08-28-2005, 11:38 PM
http://www.norcalttora.com/albums/album110/aax.sized.jpg

tacodab
08-28-2005, 11:39 PM
they are done!!!!
fawkers :(:(
I want to wheeeeel soooooooooooo bad!!!

you are going early on Fri with Mike and I correct!!!!!!

AngryAndy
08-28-2005, 11:41 PM
Yeah, jizzy back to ya....


http://www.norcalttora.com/~andy/pics/deanjizzy.JPG

tacodab
08-28-2005, 11:41 PM
You rule.

I want my IFS back.

Wait, my 4runner is still IFS. I am going right now to Dusy...Do you think i can catch up to them?

Hell yes you can catch them!!! lets go now!!!

http://www.norcalttora.com/albums/album110/acg.sized.jpg

tacodab
08-28-2005, 11:42 PM
Yeah, jizzy back to ya....


http://www.norcalttora.com/~andy/pics/deanjizzy.JPG
sweeeeeeeeeeT!!!! LOL

tacodab
08-28-2005, 11:43 PM
oh crap I have to go that direction????

http://www.norcalttora.com/albums/album110/acf.sized.jpg

AngryAndy
08-28-2005, 11:43 PM
they are done!!!!
fawkers :(:(
I want to wheeeeel soooooooooooo bad!!!

you are going early on Fri with Mike and I correct!!!!!!


Of course I am...

I am thinking of getting like 10 orders of nachos before I go, and just re-heat them by the fire. I will eat nothing but nachos all weekend long. Yum. All i need to do it put my truck back together, and pull my front driveshaft. Other then that, I am ready to go. Oh yeah, order the nachos.....

tacodab
08-28-2005, 11:47 PM
sweeeeeeeeet
and
super
sweeeeeeeeet

so it should be you me and mike the first night.
anyone else going on fri? I hope not

and
aaaaaaaaaaaaaaaaaaaaaaaa
chicken rock
http://www.norcalttora.com/albums/album109/aad.sized.jpg

tacodab
08-28-2005, 11:49 PM
http://www.norcalttora.com/albums/album136/aba.sized.jpg

tacodab
08-28-2005, 11:50 PM
http://www.norcalttora.com/albums/album136/abf.sized.jpg

AngryAndy
08-28-2005, 11:51 PM
sweeeeeeeeet
and
super
sweeeeeeeeet

so it should be you me and mike the first night.
anyone else going on fri? I hope not

and
aaaaaaaaaaaaaaaaaaaaaaaa
chicken rock
http://www.norcalttora.com/albums/album109/aad.sized.jpg


Mike will hate us. I bet he will camp elsewhere just to get away from you and me. And he will turn off his CB too. Fawk, I might just rurn off MY CB. I know you will have an extended conversation with yourself, and youself as The Dick. I forsee much anger on this trip.

tacodab
08-28-2005, 11:52 PM
John and Anthony need to move back to cali
wheeling without them just aint the same :(

tacodab
08-28-2005, 11:54 PM
Mike will hate us. I bet he will camp elsewhere just to get away from you and me. And he will turn off his CB too. Fawk, I might just rurn off MY CB. I know you will have an extended conversation with yourself, and youself as The Dick. I forsee much anger on this trip.
naaaaa...... I will be happy and quite and just glad to be in my truck again wheeling and camping and having fun. :) happy dean :)

AngryAndy
08-28-2005, 11:55 PM
http://www.norcalttora.com/albums/album136/abf.sized.jpg


Aw, dude...why you gotta go there???

Look at AJ...fawker is letting my winch control cable get all snowed on.

And Rizman in the back...just got recovered too!!!

This was right before we ALL got stuck AGAIN not 10 minutes later.

Fawk that trip was cold. Fun, but cold.

AngryAndy
08-28-2005, 11:55 PM
John and Anthony need to move back to cali
wheeling without them just aint the same :(


Your right, its BETTER.

AngryAndy
08-29-2005, 09:37 PM
naaaaa...... I will be happy and quite and just glad to be in my truck again wheeling and camping and having fun. :) happy dean :)


Hey Dean....


Guess what I am selling!!!!!!!!!!

For reals too...I have it up on craigslist and vwvortex....

http://angry.servepics.com/~andy/gti/pic4.JPG
http://angry.servepics.com/~andy/gti/pic3.JPG

tacodab
08-29-2005, 09:42 PM
how much you want for it?

AngryAndy
08-29-2005, 09:47 PM
how much you want for it?


Blue book is 18900, but I posted it for 18500, Ill go as low as 18k. 23,600 miles on it. All services done at stealership.....

I am serial.

tacodab
08-29-2005, 09:49 PM
hmmmmmmmmmm :)

why you selling it?

tacodab
08-29-2005, 09:50 PM
your gona have to paint the 4runner blue now :)

AngryAndy
08-29-2005, 09:53 PM
hmmmmmmmmmm :)

why you selling it?


You will see in a couple days.....it's being replaced.

AngryAndy
08-29-2005, 09:55 PM
your gona have to paint the 4runner blue now :)

Tacoma blue or GTI blue (otherwise known as Jazz Blue) ????

I dont think the runner would look good in jazz blue.

If anything, I will paint it GOLD, or the color of the upcoming pimpmobile.

tacodab
08-29-2005, 10:31 PM
You will see in a couple days.....it's being replaced.
sweet :)

hawaiianbro
08-30-2005, 01:00 AM
FUCK throw a turbo in there all you'll hang with the new corvettes! I never knew you had one of those!

AngryAndy
08-30-2005, 07:12 AM
FUCK throw a turbo in there all you'll hang with the new corvettes! I never knew you had one of those!


Dude, it HAS a turbo in there already....and its only a 1.8 liter....but the 6 speed is nice.

And it was in the driveway when you came over....

Fawk, your brown skin must have been covering your brown eyes.... :D

hawaiianbro
08-30-2005, 08:17 AM
And it was in the driveway when you came over....

Fawk, your brown skin must have been covering your brown eyes.... :D


ahahah i swear there was only a truck in the driveway :confused:

anywayz is that room still open for rent? :cool:

AngryAndy
08-30-2005, 05:30 PM
ahahah i swear there was only a truck in the driveway :confused:

anywayz is that room still open for rent? :cool:


Not for brown people....... :D

Yeah, I think Mike is still looking....but you have nowhere to park. :)

Don't move in, instead buy my GTI; you will deliver TWICE as many pizzas in that, therefore you will make twice as much money.....

tacodab
09-04-2005, 07:02 PM
I had to do it..........

http://www.norcalttora.com/~dean/pictures/GTI/

its 2004, 18K miles, GTI, 1.8T, 5sp, leather, and all the other fixn's.
you already know this but....damn its fun to drive :) it feels like a go-kart after driving the truck for sooooo long.

AngryAndy
09-04-2005, 07:23 PM
I had to do it..........

http://www.norcalttora.com/~dean/pictures/GTI/

its 2004, 18K miles, GTI, 1.8T, 5sp, leather, and all the other fixn's.
you already know this but....damn its fun to drive :) it feels like a go-kart after driving the truck for sooooo long.


What the fawk???

you should have bought little blue......

6 speed, recaros, 18" wheels, lowered suspention, better interior, better brakes....

But I hear ya on the go-cart effect....totallly the opposite of the SAS truck. Its a reddog car for sure....

I have pics to post.....you will laugh your ass off for sure..

tacodab
09-04-2005, 07:34 PM
I was soooooooo close to driving to your house to day and drive home with little blue....then I found this one. I wanted the cold weather package and leather. the color is that dark silver color. I sooo dig it.
if the guy did not give me the price I wanted I was gona call you for a test drive :):)

pics? pics of what? post up!!!!

tacodab
09-04-2005, 07:36 PM
What the fawk???

you should have bought little blue......

6 speed, recaros, 18" wheels, lowered suspention, better interior, better brakes....

But I hear ya on the go-cart effect....totallly the opposite of the SAS truck. Its a reddog car for sure....

I have pics to post.....you will laugh your ass off for sure..
so show the pics yo!!!!

tacodab
09-04-2005, 07:42 PM
come on!!!!!!
did you wrench today? wtf are you guys doing on monday?
I need to weld and work on my shit but wtf I could just say fuck it :) wheel it as is :)

tacodab
09-04-2005, 07:42 PM
What the fawk???

you should have bought little blue......

6 speed, recaros, 18" wheels, lowered suspention, better interior, better brakes....

But I hear ya on the go-cart effect....totallly the opposite of the SAS truck. Its a reddog car for sure....

I have pics to post.....you will laugh your ass off for sure..

post up the pics!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

tacodab
09-04-2005, 07:49 PM
What the fawk???

you should have bought little blue......

6 speed, recaros, 18" wheels, lowered suspention, better interior, better brakes....

But I hear ya on the go-cart effect....totallly the opposite of the SAS truck. Its a reddog car for sure....

I have pics to post.....you will laugh your ass off for sure..
dude!
what is taking so long I need to get back to sleep!!! LOL

tacodab
09-04-2005, 07:51 PM
I will check back in the morning gosh!

AngryAndy
09-04-2005, 07:51 PM
dude!
what is taking so long I need to get back to sleep!!! LOL


go look at nachos...

thread crap there...or here, or wherever.

Austin is still here, about 60% done....still a long way to go....

I have not posted the wrenching pics yet, gotta go out and help some more.

WHY WERE YOU not HERE?

fawker, those nachos were YOURS.....

tacodab
09-04-2005, 07:54 PM
you need me I can be in concord in 1 hour!

AngryAndy
09-04-2005, 08:01 PM
you need me I can be in concord in 1 hour!


I dont need you...Austin does....

get over here, crash here for the night, I have the feeling he will too!

this re-used lift is a PITA...

maybe I will let ya roll little white to the nachos place....if your lucky....

hytenor
09-04-2005, 08:22 PM
I dont need you...Austin does....

get over here, crash here for the night, I have the feeling he will too!

this re-used lift is a PITA...

maybe I will let ya roll little white to the nachos place....if your lucky....

I can bring the plasma over and we can just start his SAS ;)

tacodab
09-05-2005, 03:37 PM
I dont need you...Austin does....

get over here, crash here for the night, I have the feeling he will too!

this re-used lift is a PITA...

maybe I will let ya roll little white to the nachos place....if your lucky....
you guys suck at helping wrench....crap I did not even come over to really help and did more help and stuff. damn!!!!!!
:( no nachos.....me 2 late. the BBQ ribs were good :) thanks man!

AngryAndy
09-05-2005, 03:58 PM
you guys suck at helping wrench....crap I did not even come over to really help and did more help and stuff. damn!!!!!!
:( no nachos.....me 2 late. the BBQ ribs were good :) thanks man!

I know, I suck at helping. He was warned though.

Austin is an excellent wrencher. Let's hope he actually wheels his rig....and does not become just another NorCal web-wheeler.

He is a lucky m-fer that he did not do it elsewhere....the only other place that could have handled what he did; would be Bentup's shop.


Sorry about the nachos dude....next time for sure.

I bet they will be open on Friday before we leave for BR. I am going to buy 10 orders of nachos and eat nachos ALL weekend long. nothing else. nachos, redbull, and Soli. Maybe a snickers or two....

tacodab
09-05-2005, 10:26 PM
thread crap all night...come on...here (BR thread) and project angry..... what ever and stuff

tacodab
09-05-2005, 10:28 PM
I know, I suck at helping. He was warned though.

Austin is an excellent wrencher. Let's hope he actually wheels his rig....and does not become just another NorCal web-wheeler.

He is a lucky m-fer that he did not do it elsewhere....the only other place that could have handled what he did; would be Bentup's shop.


Sorry about the nachos dude....next time for sure.

I bet they will be open on Friday before we leave for BR. I am going to buy 10 orders of nachos and eat nachos ALL weekend long. nothing else. nachos, redbull, and Soli. Maybe a snickers or two....

I am going to have some bad ass food this trip its sooooooo on

and
weeeeeeeeeeeeee

http://www.norcalttora.com/~dean/pictures/GTI/

AngryAndy
09-05-2005, 10:31 PM
I am going to have some bad ass food this trip its sooooooo on

and
weeeeeeeeeeeeee

http://www.norcalttora.com/~dean/pictures/GTI/


Fawk, I am angry....everywhere YOU go I go.

And davis is angry too, we are flooding his inbox........

what kinda food?

AngryAndy
09-05-2005, 10:33 PM
what ever and stuff


Dont whatever me. Your pissing me off....Serial.

Where is the Dick when you need him?

Back ON topic, do you think I should put 35's or 20"'s on the project???

noclinkers
09-06-2005, 08:42 PM
44's

noclinkers
09-29-2005, 12:35 AM
This thread sucks!!!! Makes me Angry.

Lysmachia
10-30-2005, 09:38 PM
You know for being so Angry all weekend about having to work on your POS project - where the hell are the pics? :neener:

Mike
10-30-2005, 09:41 PM
You know for being so Angry all weekend about having to work on your POS project - where the hell are the pics? :neener:

I am very happy that he worked on it all weekend. I have to drive it to work for a couple days while I fix my junk.

Later,
....Mike

Brain
10-30-2005, 09:42 PM
I am very happy that he worked on it all weekend. I have to drive it to work for a couple days while I fix my junk.

Later,
....Mike

What happened to your truck, Mike?

Mike
10-30-2005, 09:45 PM
What happened to your truck, Mike?

I broke my steering box in the gatekeeper on the Rubicon. Chuck and I drove down to the bentup shop and got another box, but it was a leaky POS. Used 3 quarts of ATF just to get home. I have another steering box, just hope that it's in good shape!

Later,
....Mike

hytenor
10-31-2005, 12:16 AM
Dont whatever me. Your pissing me off....Serial.

Where is the Dick when you need him?

Back ON topic, do you think I should put 35's or 20"'s on the project???

35s ON 20s
:D

Lysmachia
10-31-2005, 05:40 PM
I am very happy that he worked on it all weekend. I have to drive it to work for a couple days while I fix my junk.

Later,
....Mike

Dude you got a pretty cool roomie fo sho! Sucks about your steering box. I was pretty lucky mine didn't bust on escalator - as we could see stress fractures starting to appear... I just added Front Range Off Road steering box reinforcement and steering arms. Better late than never!

So back O.T. - how's the POS drive? Did the "paint job" you guys did this summer make it go any faster :D

Mike
10-31-2005, 09:41 PM
Dude you got a pretty cool roomie fo sho! Sucks about your steering box. I was pretty lucky mine didn't bust on escalator - as we could see stress fractures starting to appear... I just added Front Range Off Road steering box reinforcement and steering arms. Better late than never!

So back O.T. - how's the POS drive? Did the "paint job" you guys did this summer make it go any faster :D

I'm going to start carrying a spare steering box at all times. This is the second time in a couple months that our group needed another box and didn't have one handy.

Project Angry drives just fine! It makes lots of noises (like parts about to fall off), you can't really see out the windshield, and the brakes are marginal. Good enough for me. :D

Later,
....Mike

AngryAndy
10-31-2005, 09:49 PM
I'm going to start carrying a spare steering box at all times. This is the second time in a couple months that our group needed another box and didn't have one handy.

Project Angry drives just fine! It makes lots of noises (like parts about to fall off), you can't really see out the windshield, and the brakes are marginal. Good enough for me. :D

Later,
....Mike

Can't you just say "she needs a little work"????? Oh yeah, I should have stapped that damn axle down in back. God forbit you actually DO have to slam on the brakes, your going to have a solid axle in your bunghole. Better yet, Im going to buy a damn carpet dolley and get the axle out of the truck.....

Mike
10-31-2005, 09:55 PM
Can't you just say "she needs a little work"????? Oh yeah, I should have stapped that damn axle down in back. God forbit you actually DO have to slam on the brakes, your going to have a solid axle in your bunghole. Better yet, Im going to buy a damn carpet dolley and get the axle out of the truck.....

Well, if I gotta die from something, might as well be truck parts!

Can you at least install a stereo or something? :D

Later,
....Mike

noclinkers
10-31-2005, 10:21 PM
Glad to read the Runner is Running.

I broke my leg this week ( horse kick to the ankle) sooo, I am going to have some time to work on the 85 pick up I am building.

Lysmachia
10-31-2005, 10:37 PM
Can you at least install a stereo or something? :D


Dude... beggars can't be choosers! :flipoff1:

tacodab
10-31-2005, 10:44 PM
Can't you just say "she needs a little work"????? Oh yeah, I should have stapped that damn axle down in back. God forbit you actually DO have to slam on the brakes, your going to have a solid axle in your bunghole. Better yet, Im going to buy a damn carpet dolley and get the axle out of the truck.....
did you get big blue fixed yet? come ON!!!!!!!!!!!!!!!!

Mike
10-31-2005, 10:46 PM
Dude... beggars can't be choosers! :flipoff1:

Andy broke Big Blue just to make me drive the 4Runner. At least I have AAA. :D

Later,
....Mike

Dick Foster
11-01-2005, 09:01 AM
You should drill and tap it for hydro assit while you're at it. If you had hydro assit I wonder if it;s possible to remove the drag link in a case like your break and drive on the cylinder alone. Slow steering for sure but slow would be better than none. Just a thought that might be worth an experiment sometime.

Captkirkyota
11-01-2005, 01:03 PM
You should drill and tap it for hydro assit while you're at it. If you had hydro assit I wonder if it;s possible to remove the drag link in a case like your break and drive on the cylinder alone. Slow steering for sure but slow would be better than none. Just a thought that might be worth an experiment sometime.
I've thought about that too, maybe one day ( yeah right :rolleyes: ) I'll disconnect mine and give it a try.

Zackattak
11-01-2005, 04:05 PM
Better yet, Im going to buy a damn carpet dolley and get the axle out of the truck.....

better yet, just lift it out :D :D

AngryAndy
11-01-2005, 05:30 PM
better yet, just lift it out :D :D

You know Zack; NOT everyone here lives with their parents in their huge estates. We don't ALL have storage space, in our 3 and 4 car garages. Some of us are lacking in garage space, and we also use a lot of that space for tools....

Plus we are not all eighteen years old anymore.

Why don't you and Peetie come over and lift it out for us old fawkers??

I want it on a dolley so I can roll it in back, and when (if) Mike ever finishes his paint job, then there will be room in the garage...

Dick Foster
11-01-2005, 06:26 PM
Don't be an angry havenot.

noclinkers
11-28-2005, 08:07 PM
How goes the project?

AngryAndy
11-28-2005, 08:22 PM
How goes the project?


Mike is driving it on and off...

There is a problem with the electrical........

A neighbor has a tester, (he works for the AAA type company) and he tested my battery (bad) and the starter and alternator....i replaced the battery, but it still runs like crap....also changed the cap, rotor and plug wires.

She starts and runs like a top in the daytime, but once you put electrical load on it, it gets progressively worse. Almost like its running on 3 cynlders if the high beams, turn signals, wipers are on. The more load it sees, the shittier it runs. So therefore, its not reliable at ALL at night.....

Other then that, I gots a 85 axle for it, and am contemplating purchasing a complete built front and rear axle with ARB's and Bobby longfields installed already......

Oh yeah, stick your tongue out at the kids for me.......tell them "I WON"...and they cannot have a rematch......until our july rubicon run......

noclinkers
11-28-2005, 08:38 PM
That is weird! Let me know what you find.

I am building a 85 LB for sale. If you know anyone who is looking for a mildly built truck send em my way.

Next year the Con is going to be different. It will be interesting to see how much they change between now and then.

Mike
11-28-2005, 08:49 PM
That is weird! Let me know what you find.

I am building a 85 LB for sale. If you know anyone who is looking for a mildly built truck send em my way.

Next year the Con is going to be different. It will be interesting to see how much they change between now and then.

If you're going to hit up our July Rubicon trip, it's the 10th-12th. This time we're going in through Wentworth Springs since you can still camp at that trailhead. It will be a nice change of pace too, that section of original trail is really fun!

Later,
....Mike

noclinkers
11-28-2005, 08:51 PM
Sounds good Mike. Thanks, Bob

hytenor
11-28-2005, 09:24 PM
That is weird! Let me know what you find.

I am building a 85 LB for sale. If you know anyone who is looking for a mildly built truck send em my way.

Next year the Con is going to be different. It will be interesting to see how much they change between now and then.

by the time the FS gets through with it I should be able to get my Corolla through there :p
http://www.norcalttora.com/gallery/PetesPics/aat?full=1

noclinkers
11-29-2005, 09:47 AM
Yep, that’s what I was referring to.

AngryAndy
12-04-2005, 08:18 PM
That is weird! Let me know what you find.

I am building a 85 LB for sale. If you know anyone who is looking for a mildly built truck send em my way.

Next year the Con is going to be different. It will be interesting to see how much they change between now and then.

Bob...

Problem fixed.

It was a ground wire from the battery to the body.

I bought a new alternator($120). Replaced the battery(donation from neighbor). Got a new ignition switch ($50), new cap, rotor, plugs and wires ($60)...

The #1 spark plug was stripped coming out, so I got a helicoil kit for it, ended up not needing it.. I cleaned up the threads on the #1 and the new plug went in just fine to 14ft/lbs.

After changing all that shit, it STILL ran like crap with electrical load.

I then got the multimeter out and measured ground resistance....I only had one wire from the negative battery terminal going to the engine block.

.5 ohms from battery to block...but 35 ohms from battery to body parts! Including the coil ignitor!

I added a ground wire from the negative battery terminal to the body, and now it runs like a champ with FULL load on it.

Now I am going to buy Timmay's axles - *84* axles (front and rear), with 5.29's, ARB locker in front, 30 spline Longfields in front, chromo steering shafts, warn hubs, detroit in rear...both axles complete drum to drum...for a better price then I can rebuild mine for.

tacodab
12-04-2005, 10:27 PM
Bob...

Problem fixed.

It was a ground wire from the battery to the body.

I bought a new alternator($120). Replaced the battery(donation from neighbor). Got a new ignition switch ($50), new cap, rotor, plugs and wires ($60)...

The #1 spark plug was stripped coming out, so I got a helicoil kit for it, ended up not needing it.. I cleaned up the threads on the #1 and the new plug went in just fine to 14ft/lbs.

After changing all that shit, it STILL ran like crap with electrical load.

I then got the multimeter out and measured ground resistance....I only had one wire from the negative battery terminal going to the engine block.

.5 ohms from battery to block...but 35 ohms from battery to body parts! Including the coil ignitor!

I added a ground wire from the negative battery terminal to the body, and now it runs like a champ with FULL load on it.

Now I am going to buy Timmay's axles - *84* axles (front and rear), with 5.29's, ARB locker in front, 30 spline Longfields in front, chromo steering shafts, warn hubs, detroit in rear...both axles complete drum to drum...for a better price then I can rebuild mine for.
sweeeeeeeeeet man :)

I will help build the exo-cage but you have to drive here :):)

AngryAndy
12-04-2005, 10:33 PM
sweeeeeeeeeet man :)

I will help build the exo-cage but you have to drive here :):)

Monster Garage at Bentup sometime in early '06.

That gives me time to redo the timing chain, water pump, head gasket....and more....while its still at the house...

Timmay also has a dual case setup for me.....

Lysmachia
12-04-2005, 10:37 PM
So will this honestly be like a picked out weekend? If so I know Nic and I would fly out just to get dirty with you guys.

tacodab
12-04-2005, 10:42 PM
Monster Garage at Bentup sometime in early '06.

That gives me time to redo the timing chain, water pump, head gasket....and more....while its still at the house...

Timmay also has a dual case setup for me.....
done! I am up for that :)

noclinkers
12-04-2005, 10:46 PM
Hey Andy,

Good deal! You got it figured out.

Sounds like you are going to have a pretty capable Runner! Are you going to give the Taco a break and wheel the Runner?

You will have two good rigs; the Runner is a shorter wheelbase than the Taco at 103” isn’t it?

Anyway glad you got it figured out!

The kids say “ Hi weak pathetic old man” Looking forward to torturing you again soon!

Bob

snowchucker
12-04-2005, 11:12 PM
i have some cheap 37's too for you... you know you want to buy them since 35's are way too small for you. timmay is insane... just picked up a dana 60/ 14 bolt, 42's, and is cutting the cab off now. basically took a fully functional streetable rig and is building a full buggy. i'd also add a good alarm to your 4-runner...timmay just had his stolen from his apt as well.

tacodab
12-04-2005, 11:25 PM
i have some cheap 37's too for you... you know you want to buy them since 35's are way too small for you. timmay is insane... just picked up a dana 60/ 14 bolt, 42's, and is cutting the cab off now. basically took a fully functional streetable rig and is building a full buggy. i'd also add a good alarm to your 4-runner...timmay just had his stolen from his apt as well.
you saying that 35's are small! god damn it. next everyone will be on 37's bitches then no one will be under 40's. crap I remember when 33's were HUGE!!!! :)
Andy has a set of 35's wating to go on the runner....if he gets the 37's then he needs to sell me the 35's....I did let him buy them from brender :D :D

AngryAndy
12-05-2005, 08:47 PM
Hey Andy,

Good deal! You got it figured out.

Sounds like you are going to have a pretty capable Runner! Are you going to give the Taco a break and wheel the Runner?

You will have two good rigs; the Runner is a shorter wheelbase than the Taco at 103” isn’t it?

Anyway glad you got it figured out!

The kids say “ Hi weak pathetic old man” Looking forward to torturing you again soon!

Bob


Tell those darn kids of yours.....wait......no dont say that....I can't say what I want to say......Dammit this isn't fair!!! I have a secret surprise for those kids on the next wheeling trip they come on. Hint....bring earplugs for you and the wife....

I havn't actually MEASURED the wheelbase....but you would know better then me!

I plan on wheeling them both, hopefully.....I would love it if I could get someone to drive it up to the sirras on a trip or two once it's all done. Depending on how the runner does on the highway, I might take it out here and there and leave the taco at home. The taco has much more bling on it though...

AngryAndy
12-05-2005, 08:50 PM
i have some cheap 37's too for you... you know you want to buy them since 35's are way too small for you. timmay is insane... just picked up a dana 60/ 14 bolt, 42's, and is cutting the cab off now. basically took a fully functional streetable rig and is building a full buggy. i'd also add a good alarm to your 4-runner...timmay just had his stolen from his apt as well.

Yeah timmay told me his shit got ganked.....I need a kill switch for my POS....although it has ALWAYS had theft insurance on it.

Dude, I can't afford those 37's....well I can; but I don't want to right now....how cheap???? LOL.....

I asked TImmay about his exo-cage....told him I saw some pics of it and I liked it....he said he flopped and it smashed in about 5" or so, so he cut it all off....lol...

AngryAndy
12-05-2005, 08:52 PM
So will this honestly be like a picked out weekend? If so I know Nic and I would fly out just to get dirty with you guys.

As far as a Monster Garage day???

yes, it would be planned ahead of time......

Yeah, we could use a couple chicks to make us all some Nachos while we are wrenching....LOL.....

Mike
12-05-2005, 08:53 PM
As far as a Monster Garage day???

yes, it would be planned ahead of time......

Yeah, we could use a couple chicks to make us all some Nachos while we are wrenching....LOL.....

Nah, we need to eat nachos and drink beer while THEY wrench.

Later,
....Mike

tacodab
12-05-2005, 09:35 PM
Tell those darn kids of yours.....wait......no dont say that....I can't say what I want to say......Dammit this isn't fair!!! I have a secret surprise for those kids on the next wheeling trip they come on. Hint....bring earplugs for you and the wife....

I havn't actually MEASURED the wheelbase....but you would know better then me!

I plan on wheeling them both, hopefully.....I would love it if I could get someone to drive it up to the sirras on a trip or two once it's all done. Depending on how the runner does on the highway, I might take it out here and there and leave the taco at home. The taco has much more bling on it though...
both?

tacodab
12-05-2005, 09:36 PM
Nah, we need to eat nachos and drink beer while THEY wrench.

Later,
....Mike
I like that idea :)
I will bring a couch to sit on 2 :)

tacodab
12-05-2005, 09:36 PM
As far as a Monster Garage day???

yes, it would be planned ahead of time......

Yeah, we could use a couple chicks to make us all some Nachos while we are wrenching....LOL.....
when???????????????????????

Mike
12-05-2005, 09:54 PM
when???????????????????????

My cow camo project is blocking up the garage. I should be done within the next week or two, then it's 4Runner time!

Later,
....Mike

AngryAndy
12-05-2005, 10:02 PM
when???????????????????????

Im getting KILLED this month...beween rent....I just spent 200 needless dollars on the runner....regular bills, and now I got to send Timmay $2000...wait....$2400 bucks for those axles and crawl box.....

I need to order all the timing chain parts, and head gasket parts. I have some numbers from trdparts4u....and its not pretty....abiyt 625 bucks in parts...and im not even sure that thats ALL the parts I need....

this is the list I got from trdparts....not sure what the numbers mean at the far right, im thinking possibly the amount THEY have in stock...which means that EACH injector is 100 bucks!!!! Holy crap, this is going to cost a lot.....

I have to call enginebuilder.com...thats who Snutty got his stuff from, said it was the cheapest...and I THINK Rizman got some stuff from them also....

85310-89114 MOTOR & P 34.57 1
13506-35030 CHAIN SUB 91.99 1
13562-35020 DAMPER, C 11.72 1
13561-35020 DAMPER, C 16.01 1
16100-39346-83 PUMP ASSY 58.45 1
11115-35060 GASKET, C 25.72 1
23209-35040 INJECTOR 109.19 4
23291-41010 INSULATOR 1.98 6
90480-13005 GROMMET 1.98 6
90919-01064 PLUG, SPA 1.50 4
90919-21431 CORD SET, 41.05 1
90999-92002 HOSE, VAC 2.35 1
90910-12084 VALVE, VA 79.74 0
90910-12085 VALVE, VA 53.38 0
16573-38020 HOSE, RAD 7.33 1
16572-35060 HOSE, RAD 9.25 1
16571-35180 HOSE, RAD 12.87 1
16261-35030 HOSE, WAT 5.64 1
87245-89181 HOSE, WAT 20.30 1
87245-89163 HOSE, WAT 24.71 1
87245-89146 HOSE, WAT 10.16 1

tacodab
12-05-2005, 10:07 PM
Im getting KILLED this month...beween rent....I just spent 200 needless dollars on the runner....regular bills, and now I got to send Timmay $2000...wait....$2400 bucks for those axles and crawl box.....

I need to order all the timing chain parts, and head gasket parts. I have some numbers from trdparts4u....and its not pretty....abiyt 625 bucks in parts...and im not even sure that thats ALL the parts I need....

this is the list I got from trdparts....not sure what the numbers mean at the far right, im thinking possibly the amount THEY have in stock...which means that EACH injector is 100 bucks!!!! Holy crap, this is going to cost a lot.....

I have to call enginebuilder.com...thats who Snutty got his stuff from, said it was the cheapest...and I THINK Rizman got some stuff from them also....

85310-89114 MOTOR & P 34.57 1
13506-35030 CHAIN SUB 91.99 1
13562-35020 DAMPER, C 11.72 1
13561-35020 DAMPER, C 16.01 1
16100-39346-83 PUMP ASSY 58.45 1
11115-35060 GASKET, C 25.72 1
23209-35040 INJECTOR 109.19 4
23291-41010 INSULATOR 1.98 6
90480-13005 GROMMET 1.98 6
90919-01064 PLUG, SPA 1.50 4
90919-21431 CORD SET, 41.05 1
90999-92002 HOSE, VAC 2.35 1
90910-12084 VALVE, VA 79.74 0
90910-12085 VALVE, VA 53.38 0
16573-38020 HOSE, RAD 7.33 1
16572-35060 HOSE, RAD 9.25 1
16571-35180 HOSE, RAD 12.87 1
16261-35030 HOSE, WAT 5.64 1
87245-89181 HOSE, WAT 20.30 1
87245-89163 HOSE, WAT 24.71 1
87245-89146 HOSE, WAT 10.16 1
DAMN!!!!
and
SWEEET!!!

you are doing something with it...that is key :):)

tacodab
12-05-2005, 10:08 PM
My cow camo project is blocking up the garage. I should be done within the next week or two, then it's 4Runner time!

Later,
....Mike
its not a cow camo project!!!!!!.....dont listen to any of those fuckers!!!!!!! :)

tacodab
12-05-2005, 10:10 PM
My cow camo project is blocking up the garage. I should be done within the next week or two, then it's 4Runner time!

Later,
....Mike
it will not take a week or 2. you will be done this weekend. you can do the other colors the next day. its the base coat that has to REALLLLLLY dry first.

Mike
12-05-2005, 10:12 PM
its not a cow camo project!!!!!!.....dont listen to any of those fuckers!!!!!!! :)

Dude at work said it looked like the Southwest Shamu plane. LOL!

Later,
....Mike

snowchucker
12-05-2005, 10:25 PM
ummm... you can buy a new motor for a little more.... just swap in a 3.4 and be done w/ it...

-c

Im getting KILLED this month...beween rent....I just spent 200 needless dollars on the runner....regular bills, and now I got to send Timmay $2000...wait....$2400 bucks for those axles and crawl box.....

I need to order all the timing chain parts, and head gasket parts. I have some numbers from trdparts4u....and its not pretty....abiyt 625 bucks in parts...and im not even sure that thats ALL the parts I need....

this is the list I got from trdparts....not sure what the numbers mean at the far right, im thinking possibly the amount THEY have in stock...which means that EACH injector is 100 bucks!!!! Holy crap, this is going to cost a lot.....

I have to call enginebuilder.com...thats who Snutty got his stuff from, said it was the cheapest...and I THINK Rizman got some stuff from them also....

85310-89114 MOTOR & P 34.57 1
13506-35030 CHAIN SUB 91.99 1
13562-35020 DAMPER, C 11.72 1
13561-35020 DAMPER, C 16.01 1
16100-39346-83 PUMP ASSY 58.45 1
11115-35060 GASKET, C 25.72 1
23209-35040 INJECTOR 109.19 4
23291-41010 INSULATOR 1.98 6
90480-13005 GROMMET 1.98 6
90919-01064 PLUG, SPA 1.50 4
90919-21431 CORD SET, 41.05 1
90999-92002 HOSE, VAC 2.35 1
90910-12084 VALVE, VA 79.74 0
90910-12085 VALVE, VA 53.38 0
16573-38020 HOSE, RAD 7.33 1
16572-35060 HOSE, RAD 9.25 1
16571-35180 HOSE, RAD 12.87 1
16261-35030 HOSE, WAT 5.64 1
87245-89181 HOSE, WAT 20.30 1
87245-89163 HOSE, WAT 24.71 1
87245-89146 HOSE, WAT 10.16 1

tacodab
12-05-2005, 10:25 PM
Dude at work said it looked like the Southwest Shamu plane. LOL!

Later,
....Mike
now that is actually kind of funny :)
now people will have two things to talk about on the truck............ the snorkel and the paintjob.....freeeking people they will still talk more about the damn fucking snorkel LOL

Mike
12-05-2005, 10:28 PM
now that is actually kind of funny :)
now people will have two things to talk about on the truck............ the snorkel and the paintjob.....freeeking people they will still talk more about the damn fucking snorkel LOL

I've been driving Andy's 'Big Blue' lately. I am really starting to dig the Carson siren setup. I think I will put one of those in my truck, and when people start staring I will just give them the air horn. :xdevil:

Later,
....Mike

tacodab
12-05-2005, 10:35 PM
I've been driving Andy's 'Big Blue' lately. I am really starting to dig the Carson siren setup. I think I will put one of those in my truck, and when people start staring I will just give them the air horn. :xdevil:

Later,
....Mike
http://www.lshlights.net/catalog/2__versatile_carson_crusier_siren___speaker_bundle _3379467.htm

do it!

and dont forget

http://www.lshlights.net/catalog/911ep_led_traffic_director_28__3166396.htm

Lysmachia
12-06-2005, 08:46 PM
As far as a Monster Garage day???

yes, it would be planned ahead of time......

Yeah, we could use a couple chicks to make us all some Nachos while we are wrenching....LOL.....


Dude you asked for it, And when I am NOT greasy from whrenching with you Fawkers.... and ask my CoTTORA guys, I can make some sick ass Korean Ribs.... *grin*

Brain
12-07-2005, 02:41 PM
I've been driving Andy's 'Big Blue' lately. I am really starting to dig the Carson siren setup. I think I will put one of those in my truck, and when people start staring I will just give them the air horn. :xdevil:

Later,
....Mike

It's funny when people speed by me and I hit the air horn and all the sudden you see brake lights and they are doing the speed limit LOL I think someone said the sound of the air horn isn't illegal, just the wattage it puts out is :)

noclinkers
12-07-2005, 04:21 PM
Sooo....Carson siren...... warning me to bring ear plugs? Sounds like you are going to scare the shit out of the kids....I like it!

BTW, I use alot of enginebuilder.com stuff, seems to be good quality for a good price.

See ya , Bob

halfxspaid
01-24-2006, 10:16 PM
What the crap is new with this? :confused:

AngryAndy
01-24-2006, 10:26 PM
What the crap is new with this? :confused:


Just talked to Chuck and AJ today about it...

http://www.trail-gear.com/sas.html

thinking of getting this SAS kit or the Marlin SAS kit.

Once I have that, Im basically ready to cut.

I have the axles front and rear complete. Front has 5.29's and an ARB along with the bobby longfield 30 splines. Rear is also 5.29 and a Detroit. I will keep my 89 rear axle housing; and swap in the 3rd that I bought...apparently the drum brakes are slightly larger on the 89 rear axle.

I just got an error code last week driving it to work, o2 sensor. the o2 sensor looks like it will break if and when i try to remove it...so I am afraid of opening up pandora's box right now.

I got a triple pillar gauge pod, and a water temp, oil pressure, and volt meter. Installed the oil pressure already, and will install the water temp this weekend or next week sometime.

Got the windshield replaced.

Installed a stereo, replaced ALL the locks with new ones. Fixed the heater. Fixed a bad ground from the body to the battery. Runs like a champ. Bought a enginebuilder gasket kit, oil pump, water pump, timing chain and metal guides from Snutty for cheap...and not sure if I wanna break down the top end of the motor or not...

Need to take some pics of it, it has come a long way already.

Stopped by Bentup's shop, and AJ gave me smittybuilt bumpers front and rear for it; but eventually I will fab up something more custom. For now its better then the stockers that are on there.

pics coming soon......

Lysmachia
01-24-2006, 11:07 PM
Sure you are ready for the shorter wheelbase. Doubt you saw how much it fawks us runners in Moab but after youi left... well it fawks us runners.....

It fawked me on Pritchett and Farmington. Just talk to Dan (Bling) about it..... We've already talked Nic into getting a Taco.... That's a *WE* Me AND *DAN* Because Taco's have a much easier time of it in Moab. I learned the hart way. Are you ready?

halfxspaid
01-25-2006, 04:47 PM
Sounds great. Im working on my 85 too. I just ordered a lock-right too ... wee!

Know anywhere good in the area for smog checks? Thats the next priority!!

-Jon

AngryAndy
01-25-2006, 05:36 PM
What area are you in????

There are 2 places down the street from me, and one was a rip, the other was cool....still by the book (well, mostly...they DID let me slide on my timing being off, but BARELY off)....the rip place was like 70 frigging bucks and the cool place was like 45ish. I failed the first attempt, and had to do it again, so I paid double. Lesson learned though, and I learned how to replace a TPS and adjust my timing!

AngryAndy
01-25-2006, 05:41 PM
Sure you are ready for the shorter wheelbase. Doubt you saw how much it fawks us runners in Moab but after youi left... well it fawks us runners.....

It fawked me on Pritchett and Farmington. Just talk to Dan (Bling) about it..... We've already talked Nic into getting a Taco.... That's a *WE* Me AND *DAN* Because Taco's have a much easier time of it in Moab. I learned the hart way. Are you ready?

I am ready.......remember all those lines I told you to take in Moab????? You didnt seem to have ANY problems with them...in fact, you even chickened out of a few of them if I remember correctly......something like "NO, I want CORBIN to spot me....<scared look on your face>"

Plus; a bobbed bed will probably happen at some point in time, and I don't give a fuck if I roll this Project....well, maybe a bit, but not too much!

Oh yeah, I get white lightning back from the body shop tomorrow....they hate me by now. I "suggested" that they polish the whole body, not just the new paint....cause it will blend better that way....

halfxspaid
01-25-2006, 10:48 PM
What area are you in????


walnut creek, what place was the good one?

AngryAndy
01-26-2006, 06:06 PM
walnut creek, what place was the good one?


Quality tune up, 2602 Monument Blvd, Concord....thats where I went...I also did a "pre-test" cause I didnt know if it would pass or not. If you fail three times, you need to go to a referee station I think. So I failed the pre test, fixed the TPS and passed (barely) the re-test. Pre test was 40 bucks, and the real test was $48 out the door including certificate.

AngryAndy
02-19-2006, 05:50 PM
So here is the update...

FINALLY got rid of the FUGLY sunroof....Here are a few before and after pics:

Also added a triple gauge pod for the driver's pillar....Volts on top, Water temp in middle, and oil pressure at bottom. Moved the stock oil idiot light to a spare port located at the passenger side engine mount, and added the new oil pressure sender where the stocker was originally. Water temp has a spare port on the engine block, drivers side, below the exhaust. My port was clogged when I opened it up, but a small screwdriver and some compressed air opened it right up. Gauges are connected to the dimming circuit of the interior lighting, tapped from where the stereo sits.

Also added the stock radio that came in my Tacoma....and a Siruis satellite radio.

Also scored a gear driven transfercase, which I will probably NOT regear, but slap in there as a dual-case setup; giving me twice the ratio I currently have.

http://angry.servepics.com/~andy/sunroof/sunroof1.JPG

http://angry.servepics.com/~andy/sunroof/sunroof2.JPG

http://angry.servepics.com/~andy/sunroof/sunroof3.JPG

http://angry.servepics.com/~andy/sunroof/sunroof4.JPG

http://angry.servepics.com/~andy/sunroof/sunroof5.JPG

http://angry.servepics.com/~andy/sunroof/sunroof6.JPG

noclinkers
02-19-2006, 06:44 PM
It 's gonna leak!

AngryAndy
02-19-2006, 07:10 PM
It 's gonna leak!

Thanks, Bob...your probably right!

If it leaks LESS then the old one, Im a Happy Andy!

Big-A
02-19-2006, 07:21 PM
looks good man...can I have the old red sunroof to put on my truck :p

noclinkers
02-19-2006, 07:24 PM
No such thing as a " Happy andy" unless it is someone impersonating a fraud!

pullnshoot25
02-20-2006, 11:26 AM
out of curisity, why does your roof leak? is it possible to create a roof that does not leak by sealing the glass permanently?

AngryAndy
02-20-2006, 02:54 PM
out of curisity, why does your roof leak? is it possible to create a roof that does not leak by sealing the glass permanently?

Thats what was there before I started; permanently glued in red plastic.

It leaked before because the exisiting sunroof had probably broken, so they sliiconed in a ugly ass piece of plastic. They must have used 2 or 3 tubes of that shit. It was everywhere, inside, outside, drips on the roof....and it was probably 5 years old, so it was coming apart from the plastic.

I drove it in the rain last thursday, and it was leaking a bit on the passenger side. Not too much, hell I don't even care cause I will probably eventually rip the interior out anyways.

I dont think the new roof will leak; at least not where its cut into the roof....if it leaks anywhere, it will be where the glass meets the sunroof frame. One side is not quite as low as the other side....it didn't leak with the water hose on it for a bit yesterday, but with a heavy storm, who knows.....

Dick Foster
02-20-2006, 02:59 PM
That's too bad Andy, I thought that pink sunroof was so you. LOL





I hate people that have overly long whiney sigs like I give a far hairy rats ass what peeves them.

Big-A
02-20-2006, 03:07 PM
That's too bad Andy, I thought that pink sunroof was so you. LOL





I hate people that have overly long whiney sigs like I give a far hairy rats ass what peeves them.


:rofl:

AngryAndy
02-20-2006, 03:25 PM
That's too bad Andy, I thought that pink sunroof was so you. LOL





I hate people that have overly long whiney sigs like I give a far hairy rats ass what peeves them.

It was RED, you blind old fuckstick.

You coming up AJ's to help with this thing, or will we need Chuck to be the sole 'voice of reason'????

Dick Foster
02-20-2006, 03:31 PM
It was definitely pink by the time you got it, homo.

When?? What is being done? It's news to me. If you're counting on Chuck to be the voice of reason, I think you have a very big problem, especially after he's had a few beers. LOL

AngryAndy
02-20-2006, 03:37 PM
Geez, Dick....aren't you on the NorCal mailing list???

Mike sent out an email to everyone on the list, thought an old ass fawker like you was at least in touch with the NorCal events happening....maybe you should go sign up again, goto the NorCal page and 'subscribe'....aw hell, I'll hyperlink it for you, I know your old and keystrokes count at your age....http://www.norcalttora.com/mailman/listinfo/norcalttora-announce

And here is the link to the official thread...
http://www.tacomaterritory.com/forum/showthread.php?t=27299

as YES, for now Chuck is the only voice of reason we have.....lol.....

Dick Foster
02-20-2006, 03:59 PM
I guess Mike didn't get or ignored the email saying I wasn't working anymore and to send that shit to my home email. I think I told Bob too. Bunch of slackers.

I think I'd better show up and give you some much needed supervision. LOL

AngryAndy
02-20-2006, 04:06 PM
Nobody ignores emails from the Dick....do they??

Just go resign up. Hell they might even list you as an actual memeber!

And I forgot, AJ said not to invite you.

I for one, would love for you to help.....I need someone to WELD my sliders on, nobody better then YOU!!!!!!

Dick Foster
02-20-2006, 04:18 PM
I just finished filling out the stupid form again. It's a particular power the web weenies like to weld over us mere mortals.

AJ is just mad at me because I chewed his ass a little but he had it coming. NO I won't go into details here, it's a private spat. He'll get over it soon enough anyway.

I'd be happy to weld your sliders on for you because the way I weld they would probably fall off before you even got home which would serve you right. Of course your frame would probably also collapse and fold in on itself from all the holes blown into it. However that is little worse than if Chuck or Timmy welded it. If you want it welded right get AJ or even Emily to do it.

AngryAndy
02-20-2006, 04:40 PM
I know all about your and AJ's little spat....I talked him out of driving to your house and dumping ALL of your parts on your lawn, with a sign that said "FREE Parts"...but I did laugh my ass of picturing it!

I just want a picutre of you welding some sliders on....that will be a classic.

But I would rather have a pic of Emily welding any day of the week!

Dick Foster
02-20-2006, 04:52 PM
LOL We were pretty hot, I know damn well I was.

snowchucker
02-21-2006, 01:14 PM
lol...u pissed him off good. hahaaaaa. Just tell him you'll use some anal ease on him next time. And since i am the voice of reason-- I think Angry should just say fawk it, grab some sack, buy a trailer, some full width axles, a dual ultimate, and some 42's... this is the hardcore wheeler right??? not another mall runner?

AngryAndy
02-21-2006, 04:49 PM
I think Angry should just say fawk it, grab some sack, buy a trailer, some full width axles, a dual ultimate, and some 42's... this is the hardcore wheeler right??? not another mall runner?

Well since I paid ya for the other shit I bought, your credit card should have plenty of room on it now. Go ahead and get me those 42's, and the dual ultimate. I will start searching on the full widths..........lol

Is your rig outta there yet? WILL it be outta there by the 4th? Can I use it to tow my imaginary trailer for the project????

Dick Foster
02-21-2006, 06:45 PM
LOL That was my intent. I wanted him to feel just as pissed as I did. No on the grease but maybe I'll throw some sand and a little salt in it next time just for good measure. LOL

tacodab
02-21-2006, 08:57 PM
I guess Mike didn't get or ignored the email saying I wasn't working anymore and to send that shit to my home email. I think I told Bob too. Bunch of slackers.

I think I'd better show up and give you some much needed supervision. LOL
hell yes you better show up!

Mike
02-21-2006, 09:12 PM
I just finished filling out the stupid form again. It's a particular power the web weenies like to weld over us mere mortals.


Dick! The NorCal TTORA website is completely automated. That means YOU do the work of maintaining your list subscription.

And you suck for not going to Death Valley with us. It was an excellent trip.

Later,
....Mike

Dick Foster
02-22-2006, 07:49 AM
I can assure you it wasn't by choice. I'm having a wheeling fit bad but fate is not cooperating with the axle and jury thing and now a couple of folks are trying to hire me, damn it. No rest for the wearey.

Dick Foster
02-22-2006, 07:51 AM
I may or may not. Hopefully, I'll be working on my axle again. Obviously if I can get things to fall my way for a change, I'd rather do that.

tacodab
02-22-2006, 09:12 AM
I may or may not. Hopefully, I'll be working on my axle again. Obviously if I can get things to fall my way for a change, I'd rather do that.
things will work out the dick, they always do :):)

Dick Foster
02-22-2006, 05:50 PM
Maybe maybe not, this has turned into the axle from hell.
Oh well at least I think I can probably tear it down and put it back together blind folded by now. That might come in handy some day out in the sticks.

hytenor
02-23-2006, 01:09 AM
I can assure you it wasn't by choice. I'm having a wheeling fit bad but fate is not cooperating with the axle and jury thing and now a couple of folks are trying to hire me, damn it. No rest for the wearey.

ARB, ARB, ARB, ARB.... :p

Dick Foster
02-23-2006, 08:50 AM
No No No No!!!

hytenor
02-23-2006, 07:57 PM
No No No No!!!

Dick, the Queen of DeNyle :p

snowchucker
02-23-2006, 10:10 PM
god damn it dick... give in and just buy a freakin ARB.

Dick Foster
02-24-2006, 09:18 AM
No, that is no way to learn about or find something new. Why turn your back on what could be a good thing just because of some unrelated stuff? I just want to make sure that I give this thing a fair shot. At this point all that I could blame Tractech for is the thing unbolting itself. That's just the nature of manufacturing anything, shit happens. Some of the aggrivation is just standard coporate bullshit that all of them dish out thanks to this country's current MBA mentality. They had nothing to do with the FedX problem or the fact that the rear end shop busted the trigger ring. All it all it's just fate fucking with me. I got use to that happening from time to time a long time ago. I can assure you that much worse than this has happened to me in the past and I managed to survive. What doesn't kill you makes you stronger. LOL

hytenor
02-24-2006, 10:49 AM
god damn it dick... give in and just buy a freakin ARB.

he's in denial, forget it. :p

tacodab
02-27-2006, 02:03 PM
Andy
your house 7:00 am
I am there! done! will do! 10-4! copy that! good to go! sweet!
I have the hand held GMRS radios we can use for this trip. that tooooo long to travel and not have any communication :)
the CB will still be installed before the weekend.....hell I will express ship the trail gear stuff and we can do a dual truck swap in one day!!!!!!!!!!!!!!!!!!!!

AngryAndy
02-27-2006, 03:12 PM
Andy
your house 7:00 am
I am there! done! will do! 10-4! copy that! good to go! sweet!
I have the hand held GMRS radios we can use for this trip. that tooooo long to travel and not have any communication :)
the CB will still be installed before the weekend.....hell I will express ship the trail gear stuff and we can do a dual truck swap in one day!!!!!!!!!!!!!!!!!!!!

Sounds good! 7am it is....we can load up the steel, and whatever other crap (tires) and get rolling by 7:30. Should be at Bentup by 9am...then its ON.

Yeah, I figured you or Mike probably would have some sort of handheld communication devices for us to use....It will super-suck not having nosiemaking safety devices and a serious lack of power; no power windows/mirrors/locks....but it will be a fun drive anyways. You will definatly help keep my road-anger-rage in check.

Peetie gave me a firestick, but I need to get a CB. I might get a new CB for the tacoma, that way I can integrate the CB into the Carson setup.

Wait to order the trail gear......you might not like it.... :rolleyes:

hytenor
02-27-2006, 03:14 PM
Wait to order the trail gear......you might not like it.... :rolleyes:

I'm just waiting for the full story on Trail Gear and Chris Geiger to finally come out. ;) pretty shady stuff.

tacodab
02-27-2006, 03:34 PM
Sounds good! 7am it is....we can load up the steel, and whatever other crap (tires) and get rolling by 7:30. Should be at Bentup by 9am...then its ON.

Yeah, I figured you or Mike probably would have some sort of handheld communication devices for us to use....It will super-suck not having nosiemaking safety devices and a serious lack of power; no power windows/mirrors/locks....but it will be a fun drive anyways. You will definatly help keep my road-anger-rage in check.

Peetie gave me a firestick, but I need to get a CB. I might get a new CB for the tacoma, that way I can integrate the CB into the Carson setup.

Wait to order the trail gear......you might not like it.... :rolleyes:
good deal
the silver hauler has a V6 3.0 motor so the power thing is good with that.
but NO POWER anything :(:( ....and no lights sirens TD
I will have to bring road flare just in case and load some tools just in case for the haul to sac.

HEY!!! how come you are not working today?

AngryAndy
02-27-2006, 03:43 PM
V6...Im fucking jealous...

Im off due to rain....

Gave me time to get a haircut, and then to Monument Auto and got gear oil, some paint, some grease....I know Im forgetting stuff though....

Yeah, I should bring some tools also...I always find myself looking for shit in AJ's shop, and never finding anything.

tacodab
02-27-2006, 04:02 PM
V6...Im fucking jealous...

Im off due to rain....

Gave me time to get a haircut, and then to Monument Auto and got gear oil, some paint, some grease....I know Im forgetting stuff though....

Yeah, I should bring some tools also...I always find myself looking for shit in AJ's shop, and never finding anything.
RAIN!!!! fuck rain....rain means snow and snow means more snow to melt in the summer that holds up the wheeling/fishing season....damn!!!! :( although I went fishing on sunday :) weeeeeeeeeeeee!!!!!!! 2 fish....fish-on!

we can load tools up 2 I have a big ass tool box on the truck. are you tools marked?..... like Mike does? if not you should do it so they dont get left behind.

if you forget something we will have runners for ya! :)

I cant forget my chair! cuz I will be sitting on my ass most of the time LOL nothing out of the ordinary for me. and Rufus and my digicam and my recharger for my digibatts.

AngryAndy
02-27-2006, 04:28 PM
RAIN!!!! fuck rain....rain means snow and snow means more snow to melt in the summer that holds up the wheeling/fishing season....damn!!!! :( although I went fishing on sunday :) weeeeeeeeeeeee!!!!!!! 2 fish....fish-on!

we can load tools up 2 I have a big ass tool box on the truck. are you tools marked?..... like Mike does? if not you should do it so they dont get left behind.

if you forget something we will have runners for ya! :)

I cant forget my chair! cuz I will be sitting on my ass most of the time LOL nothing out of the ordinary for me. and Rufus and my digicam and my recharger for my digibatts.

Fawk rain...rain means no work. Lucky for me I dont live check to check; unlike most of the laborers we employ.

And last year's rains kept that fawking snow up there well into July; remember??

My tools are not marked at all....I wont be bringing much, just my ratcheting wrenches and the ususal 10,12,14mm stuff. I broke down and bought the 54mm socket too.

Gotta bring head, pig, and squirrel too. No wrenching is complete without them.

WTF am I forgetting? I ordered the wheels today, but I seriously doubt they will get here before Friday. You never know though, when I ordered them for the Taco; they showed up in like 2-3 days.

tacodab
02-27-2006, 04:57 PM
Fawk rain...rain means no work. Lucky for me I dont live check to check; unlike most of the laborers we employ.

And last year's rains kept that fawking snow up there well into July; remember??

My tools are not marked at all....I wont be bringing much, just my ratcheting wrenches and the ususal 10,12,14mm stuff. I broke down and bought the 54mm socket too.

Gotta bring head, pig, and squirrel too. No wrenching is complete without them.

WTF am I forgetting? I ordered the wheels today, but I seriously doubt they will get here before Friday. You never know though, when I ordered them for the Taco; they showed up in like 2-3 days.
head might have a sister to keep her company......you know how girls are they have to have a friend close by to talk with.

Happy Andy
02-27-2006, 05:11 PM
head might have a sister to keep her company......you know how girls are they have to have a friend close by to talk with.

Now THAT will be cool.

More head is better then no head any day of the week....

tacodab
03-01-2006, 09:20 AM
lots of head is planned for saturday!!!! lots and lots

got a CB for the silver hauler :) HA!

AngryAndy
03-01-2006, 04:42 PM
lots of head is planned for saturday!!!! lots and lots

got a CB for the silver hauler :) HA!

Awesome....you rock!

AJ said we should be there at 6am........I laughed so hard I nearly got into an accident.

I told him we would be there around 9ish.....

Then its a few (hundered) BEFORE pics so that we can get the truck in the same spot for the few (hundred) AFTER pics.

So you have a CB and I dont, that sucks....oh well, I guess its FRS radios then.

Dick Foster
03-01-2006, 06:38 PM
You can swing by and borrow my hand held CB if you want too, Dean. I even have a mag mount external antenna that you can use too.

AngryAndy
03-01-2006, 06:45 PM
DICK!

Are you not coming to help?????

I need YOU to weld my sliders on, seriously!

Plus you know I miss ya, just like you told Mike last night that you missed me too....

It's ME that needs the CB, he has one......

Dick Foster
03-01-2006, 06:49 PM
Nope, I want to finish that front axle from hell. I got the new part and the rear end shop is gonna pony up and make good. I still need to do the alignment and that little drill and tap mod I wanted to try.
Dean could pick up the CB and bring to you. Just don't get any of your gay gisssim on it, OK? Or if you do, clean it off and dissenfect it after use. LOL

tacodab
03-05-2006, 02:49 PM
Hey the dick.............

these guys really needed your help LOL


http://www.norcalttora.com/albums/album211/amb.jpg

Dick Foster
03-05-2006, 06:15 PM
The kind of help they need, I don't have the training for. However, I have been listening to a lot of psychiatrists lately and have managed to pick up a few things.

Intrepid
06-30-2006, 07:39 AM
What ever became of Project Angry? She get ditched once the FJ rolled in? :(

Reebles
06-30-2006, 10:57 AM
What ever became of Project Angry? She get ditched once the FJ rolled in? :(
Project Angry is done I believe, poor thing is sitting on the side of the house getting dusty

hytenor
06-30-2006, 11:38 AM
What ever became of Project Angry? She get ditched once the FJ rolled in? :(

pretty much

AngryAndy
06-30-2006, 04:51 PM
What ever became of Project Angry? She get ditched once the FJ rolled in? :(

Its 98% done....still missing rear shocks and front dshaft. I need to re-do the whole rear shaft also, which is why I have not done crap with it (currently have 2 ujoints, and I wanna CV in there)...been spending a little on the FJ and a little on the Taco...and a little at the casino, so that does not leave a lot of time for the Runner.

I was considering selling it a while back, but added up the costs involved, and would not get back what i got into it. I have decieded to wheel the FJ and the Taco this summer, and during the winter finish up the runner. Needs bumpers still, sliders, and possibly a small exo-cage.

I believe the new Toyota 4WD Magazine will have a few pages dedicated to the project buildup day. I am impatiently waiting for it to arrive in my mailbox....

Intrepid
06-30-2006, 08:39 PM
Its 98% done....still missing rear shocks and front dshaft. I need to re-do the whole rear shaft also, which is why I have not done crap with it (currently have 2 ujoints, and I wanna CV in there)...been spending a little on the FJ and a little on the Taco...and a little at the casino, so that does not leave a lot of time for the Runner.

I was considering selling it a while back, but added up the costs involved, and would not get back what i got into it. I have decieded to wheel the FJ and the Taco this summer, and during the winter finish up the runner. Needs bumpers still, sliders, and possibly a small exo-cage.

I believe the new Toyota 4WD Magazine will have a few pages dedicated to the project buildup day. I am impatiently waiting for it to arrive in my mailbox....

Wow, I have never seen someone gain interest, then lose interest in a project quite that fast! :) Want to donate parts to mine? :D :D Some of us are less fortunate! :(

AngryAndy
06-30-2006, 08:54 PM
Wow, I have never seen someone gain interest, then lose interest in a project quite that fast! :) Want to donate parts to mine? :D :D Some of us are less fortunate! :(

Its not all like that....I do still have interest; especially with gas prices out here! I wanna drive a 4 banger to work!

And No....no donations across country. Although some NorCal peeps have requested stuff for the 'Con (from Project Angry)..and they are welcome to them; since the whole project ain't moving for a couple weeks. (wheels/tires...and possibly the longfields)

Fawk, I have PappaF2 coming this weekend and 'borrowing' my CAT (from the Tacoma) so he can pass smog.

This project Angry is on "hold"...not "dead"....for now I would rather put my overflow $$$$$ into my street queen(s). Next year I plan on wheeling the 4runner for sure.

jrizman
07-01-2006, 08:14 AM
Next year I plan letting John be the one whos wheeling the 4runner for sure.

awww, your so sweet, thanks man :)

noclinkers
03-29-2008, 10:31 PM
What ever happened to the Runner?

tacodab
03-29-2008, 10:55 PM
What ever happened to the Runner?

it sits in waiting for andy to use it

I dont think he can smog it = :mad: er andy!

hytenor
03-30-2008, 12:32 AM
What ever happened to the Runner?

collecting dust in the driveway :rolleyes:

Rock Taco
03-30-2008, 09:14 AM
Had it for sale.

http://ttora.com/forum/showthread.php?t=83782

hytenor
03-30-2008, 08:13 PM
Had it for sale.

http://ttora.com/forum/showthread.php?t=83782

couldn't line up any suckers...