whats the center pin -

[GOT COPE?]

to - center pin measurement on the pre-tacoma trucks and 4runners?

[mad_african]

Being so specific really gets you answers right away!!!!!!!!!! Good luck !!

[GOT COPE?]

Being so specific really gets you answers right away!!!!!!!!!! Good luck !!

Nospeakieengrish? let you outta the country for a week and look what happens.

how bout this?
-what is the center pin to center pin measurement on an 86-95 rear axle?

[STOMPER]

I can measure my old ones latter today. But in the mean time I got this off of Pirate. :flipoff4:


79-83 Toyota Rear
Flat length = 48"
Front Half = 21.125"
Rear Half = 26.875"
Width = 2.36"
Front Eyelet = 18mm ID
Rear Eyelet = 18mm ID


84-88 Toyota Rear
Flat length = 48"
Front Half = 20.5"
Rear Half = 27.5"
Width = 2.36"
Front Eyelet = 14mm ID
Rear Eyelet = 18mm ID


89-95 Toyota Rear
Flat length = 51"
Front Half = 21.5"
Rear Half = 29.5"
Width = 2.36"
Front Eyelet = 14mm ID
Rear Eyelet = 18mm ID

[Derka]

I was thinking it was 39-40", but its been a while.

[STOMPER]

My 85's are 20.5 - 27.5

The Tacoma 's I installed are 56" but I don,t know the center to ends.

[misterzee]

center pin or "eye" of leaf springs?
where is the center pin on an axle?
got some here under my porch I can measure.

[GOT COPE?]

I can measure my old ones latter today. But in the mean time I got this off of Pirate. :flipoff4:



I checked the FAQs and did not find what I was looking for. Im not lokking for leaf spring length. Im looking for width from leaf perch to leaf perch.


center pin or "eye" of leaf springs?
where is the center pin on an axle?
got some here under my porch I can measure.

see above. from center pin on the one perch to the center pin of the other leaf spring perch. ya know the pin that holds all the leaves together. not the bolts that mount them to the hangers.


see the center pin holes on each perch? I want the width between the leaf springs basically. not the length of the actual spring. but measured from center pin to center pin, not from edge of perch to edge. on an IFS rear axle.

didnt realize I wasnt being clear enough :confused:

http://i20.photobucket.com/albums/b234/4lo/cleanoff072308004.jpg

[mad_african]

didnt realize I wasnt being clear enough :confused:
Really?? So when did you finally figure out that you didn't really know how to ask the question properly...?? I thought my original hint to you was clear enough that we didn't know what the crap you were asking for???
So I'm still guessing that you're looking for the measurement from center pin on the front spring to the center pin on the rear spring??? Which side - Left or right side of the truck - or maybe you're asking from center pin on front left leaf spring to center pin on front right spring on a pre-tacoma (mini truck) ??? SO WHAT IS IT YOU WANT !!!!!!!!!! :rofl:

[GatorTaco]

isn't this the measurement you're looking for? That's what I thought it was in the first post.

http://i151.photobucket.com/albums/s154/gatortaco/c35f3eff.jpg

Center Pin is a Center Pin, not an eye, or shackle..

OH yea.. don't be jealous of my MSPaint skillz

[misterzee]

Well, goes to show ya, 'lairn sumpin every dang day!! I just learnt sumpin. :D

Now I know that a hole drilled in a plate is a 'pin'.... ;);)

do you still need to know Colin? I have an IFS rear housing out under the porch...

[GOT COPE?]

Thank you.

isn't this the measurement you're looking for? That's what I thought it was in the first post.

http://i151.photobucket.com/albums/s154/gatortaco/c35f3eff.jpg

Center Pin is a Center Pin, not an eye, or shackle..

OH yea.. don't be jealous of my MSPaint skillz

[GOT COPE?]

Well, goes to show ya, 'lairn sumpin every dang day!! I just learnt sumpin. :D

Now I know that a hole drilled in a plate is a 'pin'.... ;);)

do you still need to know Colin? I have an IFS rear housing out under the porch...

yes, id appreciate it if you could relay that measurement to me. :)

[mad_african]

Are you sure it's not this measurement you were really looking for????
So I'm still guessing that you're looking for the measurement from center pin on the front spring to the center pin on the rear spring??? Which side - Left or right side of the truck :rofl:
This has been quite entertaining trying to figure out what you were asking for... :rofl:

[yotaman]

I think the correct way to ask the question would be: "What is the spring perch to spring perch measurment?". But what do I know?

The answer is: 29" :flipoff4:

[hunter4runner]

The measurement from the center of the spring perch (for reference use the hole the center pin of the left pack sits in) to the center of the spring perch on the opposite side of the axel. This pertains to the 86-95 IFS axels.

That sound good

I just wanted to throw in my two cents

[Derka]

Did moths fly out of this thread when you opened it up?:D

[hunter4runner]

yes :(

in my defense i was bored and it was 1 am lol