PDA

View Full Version : first gen runner back window goes down, but not up?

Camstoy86
08-25-2009, 12:59 PM
The ground bolts is in and everything is plugged in. I don't get it.
will.the.thrill
08-25-2009, 01:39 PM
go fix it.
Zog
08-25-2009, 02:06 PM
Use a Voltmeter at the relay box in the interior side panel behind the driver's seat. I replaced my relay box with a junkyard replacement and everything has been perfect since.
keepitonall4s
08-25-2009, 02:59 PM
The contacts inside the switch also gets corroded. I took mine apart and cleaned them and they worked fine for about a year. now I have to juper arcoss the posts on the switch to go up and down.
will.the.thrill
08-25-2009, 03:19 PM
i like to think of myslef as the motivator in this thread
dougtrd
08-25-2009, 04:53 PM
on mine, the friction of pushing up was too much for the old motor and it just wouldnt do it without a little "help"...
Weilden
08-26-2009, 12:25 PM
Make sure you have all the bolts in your topper, I know on mine that if I didn't have the right bolts in the top the window wouldn't work.I think it's a safety. But this wouldn't be the first time i was wrong!!
Camstoy86
08-31-2009, 09:50 AM
Use a Voltmeter at the relay box in the interior side panel behind the driver's seat. I replaced my relay box with a junkyard replacement and everything has been perfect since.


ok. am I checking the little relay or the actual power control box?

It makes a clicking sound when I hit the switch but nothing moves....