: Latest from Built II Beat - Porn Taco


TBob
01-12-2010, 02:28 PM
Chandlers rig -
Here are the specs -
3 link - Using 2" 7075-T6 (tierod 1.75")
3.0 Ballistic Joints
18" 2.5 Saws
Full PSC hydro
Front pushed way forward - WB will be at 114
Ride hieght 21.5" to bottom of frame with 4.5" of up travel with 40's - although he only plans on running 38's at this time.
Axles
Front D44 chromo shafts, 300m joints -Not his dream axle but he got it for a good deal and it will get him by for a while untill he builds a 14 bolt

rear - 14 bolt

I did about 60 hours of solid modeling to get the numbers where I wanted them should work very well.
If anyone is interested I can post the technical numbers on the 3-link design.

Let the truck porn begin -
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler008.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler009.jpg

Ifs - gone
http://i98.photobucket.com/albums/l251/aztbob/chandler/th_chandler053.jpg (http://s98.photobucket.com/albums/l251/aztbob/chandler/?action=view&current=chandler053.flv)
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler020.jpg

He bought Rad Ryans built 44 and diamond -
Chandler wanted this killer truss -
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler036.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler038.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/11260917231.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler040.jpg

we had to rotate the knuckles -
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler039.jpg

Had to raise the altinator and motor mount to clear the upper link at full stuff.
New altinator bracket -
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler024.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/ch4.jpg

Had to change the thermostat housing as well
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler037.jpg

Some frame plating -
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler034.jpg

Lower link mount
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler029.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler033.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/ch9.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/ch8.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/ch5.jpg

Upper -
http://i98.photobucket.com/albums/l251/aztbob/chandler/ch6.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/ch7.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/ch10.jpg

sorry shitty cell pic
http://i98.photobucket.com/albums/l251/aztbob/chandler/12130916381.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/ch2.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/bhandler002.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/bhandler003.jpg[
http://i98.photobucket.com/albums/l251/aztbob/chandler/bhandler010.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/bhandler008.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/bhandler009.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2011.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2013.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2015.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2017.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2018.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2019.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2020.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2021.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2022.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2023.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2024.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2025.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2026.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2027.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2029.jpg

full stuff
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2032.jpg

Just about full droop - 1.5" to go.
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2034.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2035.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2037.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2038.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2040.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2041.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2043.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2044.jpg

North west off road header
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler2045.jpg

all pics can be seen here
http://s98.photobucket.com/albums/l251/aztbob/chandler/?start=0

We still have quite a bit to do up front (plating, gussets, etc..)
then redoing sliders
pulling the bed cutting the frame behinded the cab
full exo (truggy style)
radiator in the rear
4 link rear
shooting for azrocks.

Joe Dirt
01-12-2010, 03:19 PM
lookin good; whats the time frame that these pics span?

TBob
01-12-2010, 03:22 PM
I think we are just about 2 months
not a full time gig - just nights and weekends.

lookin good; whats the time frame that these pics span?

ike
01-12-2010, 03:23 PM
awesome work.

Mark in Az
01-12-2010, 04:19 PM
Good stuff! :kewl:

BOVADS
01-12-2010, 04:28 PM
"HOLY FAWKIN AXEL TRUSS , BATMAN" is that where 44's usually break?


just joking, looks good, welds are damn purty. definitly shouldnt have any link mount failures!!

18" CO's? so about hlf way up the windshield?

007max
01-12-2010, 04:34 PM
Very nice! I was a little confused with the engine cage / track bar mount construction when it was 1/2 way done but it makes sense now :cool:

FAUX X 4
01-12-2010, 04:46 PM
... and I thought the 44 under mine was heavy! :lmao:

ninja
01-12-2010, 08:42 PM
my middle finger is famous now. Looks awesome

85 flopped
01-12-2010, 10:56 PM
Have you ran that motor with that header on it? If so any feed back? Also do you recall how much it cost-their website sucks.

Truck is looking bitchin cant wait to see some action pics

Symon623
01-13-2010, 07:02 AM
Looks good Bob, will that baby engine fit through that small opening should removal be required? Pretty screwed if an engine upgrade is in the future.

awsumdc
01-13-2010, 08:58 AM
Looking good man. Very nice. I was wondering about that panhard bar too until I figured you were going to have to run full hydro.

AZrockbum
01-13-2010, 09:56 AM
Damn pimpin :cool: Can't wait to see it in action.

TBob
01-13-2010, 10:58 AM
Motor should go either direction if needed. Probably the easiest out the bottom. The top we made removable to work on it.

Looks good Bob, will that baby engine fit through that small opening should removal be required? Pretty screwed if an engine upgrade is in the future.

Jaco
01-13-2010, 11:01 AM
Wow!

anti-squat may be different.


Anti-squat is for the rear, as is that calculator. The front is anti-dive. ;)

Chandler sure can weld. :welder:

TBob
01-13-2010, 11:07 AM
yep - Knew that just didn't write it correctly, thanks for the clarification

Wow!




Anti-squat is for the rear, as is that calculator. The front is anti-dive. ;)

Chandler sure can weld. :welder:

AZRockToy
01-13-2010, 11:08 AM
Wow... That looks good! Great work!

TBob
01-13-2010, 11:46 AM
haven't run it with the header yet - chandler just picked it up used so I don't know the cost - I'm thinking around $450 new

Have you ran that motor with that header on it? If so any feed back? Also do you recall how much it cost-their website sucks.

Truck is looking bitchin cant wait to see some action pics

Kaistie
01-13-2010, 12:30 PM
Pimp'n aint easy, or so they say. Nice work there Bob. I like the creativity. Why do all that work on a 44 and not just drop in a 60? Or has that already been beaten to death?

TBob
01-13-2010, 12:33 PM
that would have been nice but he didn't have the $$ for it - it will happen eventually.

Pimp'n aint easy, or so they say. Nice work there Bob. I like the creativity. Why do all that work on a 44 and not just drop in a 60? Or has that already been beaten to death?

Dirtygerman
01-15-2010, 04:35 PM
Looks good!

Is my truck next??? :)

TBob
01-17-2010, 09:43 PM
you have the $$ will make the time :D



Looks good!

Is my truck next??? :)

TBob
01-17-2010, 10:10 PM
Cycled, cycled and them cycled again.
Had to clearance the inside of the frame.
Did frame plates. Tore it apart and got all the axle link mounts
cut down capped and burned in.
Finnished up some tubes that hadn't been burned in yet untill we got clearances worked out and got some work done on the frame side panhard mount.
axle location at ride hieght
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3004.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3002.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3003.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3010.jpg

Inner frame clearancing
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3014.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3011.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3013.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3008.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3015.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3016.jpg
Chow time - :D
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3005.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3017.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3020.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler3021.jpg

MerMan
01-19-2010, 09:11 AM
All I see is BEEF! Good job Beat Your Meat.

Spinnas
01-19-2010, 08:11 PM
All I see is BEEF! Good job Beat Your Meat.

Dude, I think they are on the edge of copyright infringement. They are stealing your crib-like tubework techniques!

TBob
01-20-2010, 08:22 AM
not hardley - :flipoff4:

Dude, I think they are on the edge of copyright infringement. They are stealing your crib-like tubework techniques!

seth_js
01-25-2010, 01:09 PM
Is this pile of shit on the ground yet?

TBob
01-25-2010, 01:31 PM
none of your damn business - jackass! :flipoff4:

Is this pile of shit on the ground yet?

yogiaz
01-27-2010, 04:59 PM
Wow Bob! Very very nice! Good job!

TBob
01-29-2010, 11:18 AM
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck1003.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck1004.jpg

here is how shell be at ride height up front.
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck1013.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck1011.jpg

FAUX X 4
01-29-2010, 11:23 AM
Please tell me he's not going to paint it safety orange! :flipoff4:

TBob
01-29-2010, 11:30 AM
no bright pink - getting painted right now

Please tell me he's not going to paint it safety orange! :flipoff4:

FAUX X 4
01-29-2010, 11:34 AM
no bright pink - getting painted right now

Pepto Pink or Labia Pink? :lmao:

TBob
01-29-2010, 11:39 AM
Labia Pink - what else for porn taco?
Of coarse I'm kidding, I tried to talk him into it put he just wouldn't do it. I don't think he is secure enough in his man hood - LOL!!
Anyhow it's gona be a bright metalic pearl blue.

Pepto Pink or Labia Pink? :lmao:

FAUX X 4
01-29-2010, 11:45 AM
Labia Pink - what else for porn taco?
Of coarse I'm kidding, I tried to talk him into it put he just wouldn't do it. I don't think he is secure enough in his man hood - LOL!!
Anyhow it's gona be a bright metalic pearl blue.

Maybe he should consider a nice two tone...
http://i74.photobucket.com/albums/i267/FAUX_X_4/AzRocks_09/DSC03796.jpg

TBob
01-29-2010, 11:54 AM
yea that really looks like shit

Maybe he should consider a nice two tone...
http://i74.photobucket.com/albums/i267/FAUX_X_4/AzRocks_09/DSC03796.jpg

007max
01-29-2010, 02:38 PM
That's quite a wheel base change.. chopping the frame in back next?

TBob
01-29-2010, 02:44 PM
yes - you just looked at the pretty pictures didn't you? :D

That's quite a wheel base change.. chopping the frame in back next?

ninja
01-29-2010, 03:15 PM
:flipoff1: smooch dick.

Please tell me he's not going to paint it safety orange! :flipoff4:

FAUX X 4
01-29-2010, 03:41 PM
:flipoff1: smooch dick.

I'm just sayin... :flipoff4:

TBob
01-29-2010, 04:16 PM
shouldn't you be helping someone? :flipoff1:

:flipoff1: smooch dick.

007max
01-29-2010, 05:54 PM
yes - you just looked at the pretty pictures didn't you? :D

Nah, I've been following the updates. Couldn't really 'tell' how far forward the axle is until the wheels & tires went on.

TBob
02-01-2010, 09:46 AM
time for paint -
here is the NON ventitalted both - :rolleyes:
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2001.jpg

The painting Nut jobs -
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2002.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2004.jpg

High as kites -
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2005.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2009.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2010.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2011.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2013.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2014.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2015.jpg

http://i98.photobucket.com/albums/l251/aztbob/chandler/truck2016.jpg

seth_js
02-01-2010, 12:43 PM
Right on. The paint looks good.

TBob
02-01-2010, 01:01 PM
my boy is getting a bike this week so we ought to make a run up to the flats with him this coming weekend.

Right on. The paint looks good.

seth_js
02-01-2010, 02:36 PM
my boy is getting a bike this week so we ought to make a run up to the flats with him this coming weekend.

Cool. Lets hope we get good weather this weekend.

RadRyan(Fabwerx)
02-02-2010, 08:57 AM
"HIGH AS KITES" Thats different from when? looks good.

FAUX X 4
02-03-2010, 10:25 AM
NICE! That's a good range. ;)

TBob
02-03-2010, 10:49 AM
thanks - would have like the roll axis a little better but I just couldn't get it there.

NICE! That's a good range. ;)

FAUX X 4
02-03-2010, 11:01 AM
thanks - would have like the roll axis a little better but I just couldn't get it there.

3 isn't bad........ you shouldn't really even notice it.

FAUX X 4
02-03-2010, 03:31 PM
well couldn't get the adjustment I wanted on the uppers and not hit the mounts with the lowers so after a bit of tweaking am at -3.74 roll axis
and only have 4 adj holes - AS adjustments at 75% 92% 108% or 125%. Should be able to get something that works with that range.

Looking forward to see how you guy's finish it out! :cool:

TBob
02-03-2010, 03:38 PM
me too - :D

Looking forward to see how you guy's finish it out! :cool:

007max
02-03-2010, 07:20 PM
What is that 4 link calculator program you are using? Looks like the shit I have to do by hand for my mechanisms class..

TBob
02-04-2010, 10:13 AM
yea it's easier just to download the program from pirate :doh:
they don't have the angle of the links with it though - I added that in.

What is that 4 link calculator program you are using? Looks like the shit I have to do by hand for my mechanisms class..

007max
02-04-2010, 10:36 AM
yea it's easier just to download the program from pirate :doh:
they don't have the angle of the links with it though - I added that in.

Got a link?

TBob
02-04-2010, 12:15 PM
know how to search? - I'll shoot you an email with one.

Got a link?

TBob
02-04-2010, 12:16 PM
sent you the 3 and 4 link ones I added the angles too

TBob
02-18-2010, 12:33 PM
latest -
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3001.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3002.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3003.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3004.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3005.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3006.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3007.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3008.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3009.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3010.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3016.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3014.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3011.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3012.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3013.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3015.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3017.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3018.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3019.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3020.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3021.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck3022.jpg

Kaistie
02-18-2010, 01:26 PM
I like the 3/8" plate usage. Finally folks are getting it. Good work Bob!

FAUX X 4
02-18-2010, 01:30 PM
I like the 3/8" plate usage. Finally folks are getting it. Good work Bob!

pfffffffffft.......... 1/2" to 5/8" is where it's at! :D

TBob
02-18-2010, 02:32 PM
thamks just hope we make azrocks....still alot to do.

I like the 3/8" plate usage. Finally folks are getting it. Good work Bob!

luap_dr
02-18-2010, 05:09 PM
looking good. paint looks good

seth_js
02-18-2010, 07:55 PM
looking good. paint looks good

shuddup

TBob
02-18-2010, 08:02 PM
both of you need to get your asses over to help! :flipoff3:


looking good. paint looks good

shuddup

MerMan
02-18-2010, 08:03 PM
Go Chandler go!

TBob
02-18-2010, 09:17 PM
hopefully that will get his ass over here to do some work - I'm getting tired of carring the load. :rolleyes:

Go Chandler go!

FAUX X 4
02-19-2010, 11:39 PM
Thanks for the kick ass skid T-Bob & Chandler! Truck is looking tits!!! Top notch fab-work for sure! :xpimp:

TBob
02-21-2010, 07:40 PM
we only got 1 day in on it this week so not much to update
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck4002.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck4005.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck4006.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck4007.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck4008.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck4004.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck4009.jpg

TBob
02-21-2010, 07:41 PM
Your welcome - thanks for helping out with the canister plumbing.

Thanks for the kick ass skid T-Bob & Chandler! Truck is looking tits!!! Top notch fab-work for sure! :xpimp:

FAUX X 4
02-21-2010, 09:32 PM
Your welcome - thanks for helping out with the canister plumbing.

You can thank me when it's actually done! :D

*ROKTOY*
02-22-2010, 12:22 PM
updates

007max
02-22-2010, 12:42 PM
updates

WTF, he updated yesterday!


Did you buff out and repaint the rock rash on the cage already? :lmao:

TBob
02-22-2010, 01:11 PM
:doh:

updates

TBob
02-22-2010, 01:12 PM
:confused:

WTF, he updated yesterday!


Did you buff out and repaint the rock rash on the cage already? :lmao:

007max
02-22-2010, 02:34 PM
:confused:

That was directed at Frank. He scratched up his shiny truck yesterday :p

*ROKTOY*
02-22-2010, 05:18 PM
WTF, he updated yesterday!


Did you buff out and repaint the rock rash on the cage already? :lmao:

That shit don't work those pic's been up for a week now.


YES

TBob
02-23-2010, 08:30 AM
I posted the last set Sunday night :rolleyes:

That shit don't work those pic's been up for a week now.


YES

*ROKTOY*
02-23-2010, 11:57 AM
Wait a minute, I do think you found a way to post those last one's in there, cause I swear they weren't there before. Or maybe it was just to many brews, anyway it's looking excellent keep up the good work and do more of it I want to see this thing in action at the Rocks.
Oh, and you better cover up that pretty blue paint when your grinding and welding near it or all that shit will be stuck in the paint. Once again excellent work.

howyadoin
02-23-2010, 12:25 PM
Lookin' good Bob!

TBob
02-23-2010, 01:26 PM
Wait a minute, I do think you found a way to post those last one's in there, cause I swear they weren't there before. Or maybe it was just to many brews, anyway it's looking excellent keep up the good work and do more of it I want to see this thing in action at the Rocks.
Oh, and you better cover up that pretty blue paint when your grinding and welding near it or all that shit will be stuck in the paint. Once again excellent work.

I don't think Chandler cares about the paint.
Thanks for the props.

Lookin' good Bob!

Thanks Mike

*ROKTOY*
02-23-2010, 01:40 PM
OK, guess he was bored when he painted it.

TBob
02-23-2010, 01:53 PM
just didn't want it black -
as you can tell he didn't even care to pull dents

OK, guess he was bored when he painted it.

*ROKTOY*
02-23-2010, 01:54 PM
Black, Blue, what ever. Yeah I saw that. Should of just used the old rattle can, instead of going through all the trouble of making a booth.

TBob
02-23-2010, 02:09 PM
wasn't your trouble so why do you care -

Black, Blue, what ever. Yeah I saw that. Should of just used the old rattle can, instead of going through all the trouble of making a booth.

*ROKTOY*
02-23-2010, 04:03 PM
Really don't, just trying see the logic in it. I mean if you don't care WTF.

TBob
02-23-2010, 04:05 PM
it's no longer black.......:rolleyes:

Really don't, just trying see the logic in it. I mean if you don't care WTF.

*ROKTOY*
02-23-2010, 04:10 PM
What ever.

TBob
02-23-2010, 04:13 PM
:rofl:

What ever.

seth_js
02-24-2010, 10:51 AM
Look is this pile of shit ever going to be drivable or not?

TBob
02-24-2010, 11:09 AM
if it makes it to azrocks it will be a miracle :rolleyes:

Look is this pile of shit ever going to be drivable or not?

ninja
02-26-2010, 05:29 PM
http://www.evilmilk.com/pictures/Bob.jpg

briansc33
02-26-2010, 06:54 PM
thanks for helping out with the canister plumbing.

You and Eric are welcome :flipoff4: :xbeer2:

Looking good guys! Hammers, Jambo, April, be there :D

FAUX X 4
02-26-2010, 07:59 PM
You and Eric are welcome :flipoff4: :xbeer2:

Looking good guys! Hammers, Jambo, April, be there :D

Oh, I see, you ignore my pm, but you answer Bob? :flipoff4:

briansc33
02-26-2010, 08:29 PM
Oh, I see, you ignore my pm, but you answer Bob? :flipoff4:

Wutt?!? I replied to you on 2/16 at 11:36 PM?? I wondered why you did'nt reply, but then thought to myself *self, Eric is just going to take all the credit, so he won't reply* :flipoff4: j/k

Seriously... You did'nt get it?? Then how did you figure it out all by you onesies :missingto

FAUX X 4
02-26-2010, 09:56 PM
Wutt?!? I replied to you on 2/16 at 11:36 PM?? I wondered why you did'nt reply, but then thought to myself *self, Eric is just going to take all the credit, so he won't reply* :flipoff4: j/k

Seriously... You did'nt get it?? Then how did you figure it out all by you onesies :missingto

hmmmm I never got a reply? I figured you were just ignoring me like usual!

I was able to figure it out be looking under the hood of mine and looking at the canister under the hood of my 4runner! :D

So Bob, Did you guys get this handled?........... and can I get your daughter's (in the picture Ninja posted) number? :cool:

howyadoin
02-27-2010, 09:20 AM
it's no longer black.......:rolleyes:

That pretty much sums it up.:D

Spinnas
02-27-2010, 04:14 PM
if it makes it to azrocks it will be a miracle :rolleyes:

If it's 2wd and rolls, he could probably "wheel" with Sy up to Crown King on the body-friendly run:D

TBob
03-01-2010, 08:48 AM
poor Sy, he never gets a break around here - :lmao:

If it's 2wd and rolls, he could probably "wheel" with Sy up to Crown King on the body-friendly run:D

*ROKTOY*
03-03-2010, 06:34 PM
So WTF Bob, Chandler, I thought you guys would have that thing done by now?

howyadoin
03-03-2010, 07:58 PM
So WTF Bob, Chandler, I thought you guys would have that thing done by now?

He could do it better.:rolleyes:

TBob
03-04-2010, 08:30 AM
is it time for azrocks yet? :rolleyes:

So WTF Bob, Chandler, I thought you guys would have that thing done by now?

WARTOY
03-04-2010, 06:50 PM
is it time for azrocks yet? :rolleyes:

Almost! Woohoo, I can't wait! :xrocker:

TBob
03-05-2010, 08:51 AM
ok i know I've been slacking on the updates - and the updates here are allready out dated but we have only 11 days left to finish this thing up.
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5001.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5003.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5004.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5006.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5007.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5009.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5010.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5011.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5012.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5013.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5014.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5015.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck5016.jpg

howyadoin
03-05-2010, 09:51 AM
It's coming together great Bob!

*ROKTOY*
03-05-2010, 01:42 PM
Looking gooooood, keep working, keep working.

007max
03-05-2010, 01:56 PM
Looks like shit - you should give it to me!

;)

4xClover
03-05-2010, 02:00 PM
Wow! Looks GREAT Bob!

AZrockbum
03-05-2010, 02:00 PM
Nice work guys!

TBob
03-05-2010, 02:36 PM
It's coming together great Bob!

Looking gooooood, keep working, keep working.

Looks like shit - you should give it to me!

;)

Wow! Looks GREAT Bob!

Nice work guys!

Thanks all - down to the wire hope we can pull it off.

*ROKTOY*
03-05-2010, 05:25 PM
Keep thrashing, keep thrashing and you will.

4xClover
03-05-2010, 06:14 PM
Keep thrashing, keep thrashing and you will.

There you got Bob..the advise you needed! ;)

seth_js
03-15-2010, 12:29 PM
For fucks sake Chandler...

TBob
03-15-2010, 12:32 PM
:confused: did he screw your sister again this weekend?

For fucks sake Chandler...

FAUX X 4
03-15-2010, 12:34 PM
Is this POS done yet???

TBob
03-15-2010, 12:36 PM
http://www.tacomaterritory.com/forum/showthread.php?p=1913220#post1913220
:D

Is this POS done yet???

FAUX X 4
03-15-2010, 12:39 PM
http://www.tacomaterritory.com/forum/showthread.php?p=1913220#post1913220
:D

A simple NO would have been easier! :flipoff4:

TBob
03-15-2010, 01:01 PM
yee of little faith :D

A simple NO would have been easier! :flipoff4:

FAUX X 4
03-15-2010, 01:04 PM
yee of little faith :D

I didn't imply that it wouldn't get done........... I just wanted to know if it was done yet?............ obviously it's NOT! :flipoff4:

TBob
03-15-2010, 01:13 PM
I'm gona sick that middle finger up your ass the next time I see you! :flipoff4:

I didn't imply that it wouldn't get done........... I just wanted to know if it was done yet?............ obviously it's NOT! :flipoff4:

WARTOY
03-15-2010, 02:42 PM
I'm gona sick that middle finger up your ass the next time I see you! :flipoff4:

Will that be part of the festivities on Friday or Saturday?;)

JJackson
03-15-2010, 10:46 PM
I'm gona sick that middle finger up your ass the next time I see you! :flipoff4:

That is not considered an insult to Eric, he will probably take you up on the offer. Please keep that action far away from the camp fire please.

WARTOY
03-16-2010, 02:44 AM
That is not considered an insult to Eric, he will probably take you up on the offer. Please keep that action far away from the camp fire please.

Insert here :xmoon:.

TBob
03-22-2010, 09:31 AM
well woke up last Tuesday at 5:30am - went to work and when I got home started working on the Truck - 6am Thurs morning Chandler was welding on the rear bottom coil mounts. We never slept but we did make it to AZRocks.
Shake down run was a complete sucess. No major issues and no breakage for 3 days of wheeling. Rig worked excellent. Nail the throttle and truck stays flat. Hit the brakes truck doesn't dive. Fly around a corner and truck doesn't roll. On the trail the front doesn't lift on big falls. So here are the updated build pics and a few poser shots. I'll post up some video of the rig in action when my buddy gets them down loaded.
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6001.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6004.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6005.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6006.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6007.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6011.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6012.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6013.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6015.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6020.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6017.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6024.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6025.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6026.jpg

Here's a good pic of Chandler the morning we were finnishing up - he had been up for 3 days straight at this point.
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6030.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6035.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6032.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6042.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/truck6040.jpg

BOVADS
03-22-2010, 09:38 AM
GOOD WORK GUYS!!
glad you guys made it to AZ ROCKS

TBob
03-22-2010, 10:51 AM
Thanks Rick - did you make it, don't rememeber seeing you.

GOOD WORK GUYS!!
glad you guys made it to AZ ROCKS

BOVADS
03-22-2010, 11:00 AM
Thanks Rick - did you make it, don't rememeber seeing you.

nope, missed it this year:mad:

luap_dr
03-22-2010, 02:39 PM
Congrats on getting it done bob an chandler. thing look AWSOME

TBob
03-24-2010, 09:47 AM
Thanks Paul

Congrats on getting it done bob an chandler. thing look AWSOME

thehackman15
03-24-2010, 10:26 PM
hey tbob, how much for a bumper like igors?

85 flopped
03-24-2010, 10:36 PM
so how did the header sound?

TBob
03-25-2010, 09:42 AM
I liked it - loud with a deep tone for a 4 banger.

so how did the header sound?

TBob
03-25-2010, 09:43 AM
sorry man we don't build and ship. We do one off stuff built for your rig with your rig in house.

hey tbob, how much for a bumper like igors?

007max
03-25-2010, 11:42 AM
sorry man we don't build and ship. We do one off stuff built for your rig with your rig in house.

He's at ASU.

TBob
03-26-2010, 09:24 AM
$1500


hey tbob, how much for a bumper like igors?

WARTOY
03-26-2010, 04:31 PM
$1500

:eek::xbarf: Sorry, prices like that scare a mexican. :D

thehackman15
03-26-2010, 11:15 PM
:eek::xbarf: Sorry, prices like that scare a mexican. :D

and poor white kids.

007max
03-26-2010, 11:24 PM
$1500

Damn, inflation is a bitch :missingto

TBob
03-29-2010, 09:36 AM
Sorry guys I'm not in the cookie cutter bumper bussiness. Maybe check out
http://www.demello-offroad.com/catalog/product_info.php?cPath=27_23&products_id=42&osCsid=ba85355e3e2126748c7906f5fd4ae3d2
or build one yourself and see how much time it takes.

:eek::xbarf: Sorry, prices like that scare a mexican. :D

and poor white kids.

hytenor
03-29-2010, 08:05 PM
Sorry guys I'm not in the cookie cutter bumper bussiness. Maybe check out
http://www.demello-offroad.com/catalog/product_info.php?cPath=27_23&products_id=42&osCsid=ba85355e3e2126748c7906f5fd4ae3d2
or build one yourself and see how much time it takes.

that price was just for the steel, right?

:p

hey, why no night-flop picks :D

you get any real tires/wheels on that thing yet? :p

awesome rig guys!!!!

TBob
03-30-2010, 09:30 AM
Thanks
there are some posted somewhere - but here you go
No tires and wheels yet - it will be some time before the rig is completley finished. Chandler is tap out of $$
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler-roll.jpg

that price was just for the steel, right?

:p

hey, why no night-flop picks :D

you get any real tires/wheels on that thing yet? :p

awesome rig guys!!!!

luap_dr
03-30-2010, 05:46 PM
whats the update on the truck after 100 yard to hell trail? what time did you guys finally get out of there

WARTOY
03-30-2010, 05:54 PM
Sorry guys I'm not in the cookie cutter bumper bussiness. Maybe check out
http://www.demello-offroad.com/catalog/product_info.php?cPath=27_23&products_id=42&osCsid=ba85355e3e2126748c7906f5fd4ae3d2
or build one yourself and see how much time it takes.

I like cookies. :rolleyes:

Payne86
03-30-2010, 06:24 PM
Thanks
there are some posted somewhere - but here you go
No tires and wheels yet - it will be some time before the rig is completley finished. Chandler is tap out of $$
http://i98.photobucket.com/albums/l251/aztbob/chandler/chandler-roll.jpg

That was my picture!:D

TBob
03-31-2010, 09:34 AM
got to 87 and bush around 10 and called AAA for the ride home.

whats the update on the truck after 100 yard to hell trail? what time did you guys finally get out of there

TBob
03-31-2010, 09:35 AM
Nothing wrong with that :D

I like cookies. :rolleyes:

Grey Goat
04-12-2010, 11:59 PM
that is sick! I like the test roll. that should be done on every project.

Nater
04-29-2010, 01:04 AM
Beautiful metal :clap: that thing is awesome

85 flopped
08-10-2010, 11:24 PM
so now that the header has been on the truck for a little while, hows it holding up? no shit welds or flange warpage?

TBob
08-11-2010, 09:12 AM
nope still doing good.

so now that the header has been on the truck for a little while, hows it holding up? no shit welds or flange warpage?

TBob
09-06-2011, 11:54 AM
Boatsides underway -
http://www.pirate4x4.com/forum/showthread.php?t=853480

Dick Foster
09-06-2011, 02:27 PM
Chandler sure does some nice welding.


Boatsides underway -
http://www.pirate4x4.com/forum/showthread.php?t=853480

TBob
09-06-2011, 02:45 PM
yep he sure does - :xpimp:

Chandler sure does some nice welding.

howyadoin
09-06-2011, 10:56 PM
Lookin' good, but gawdam you need to give Eric his shifter back!:lmao:

TBob
09-07-2011, 10:03 AM
Why? - heard he has a ton more.

Lookin' good, but gawdam you need to give Eric his shifter back!:lmao:

howyadoin
09-07-2011, 12:29 PM
Why? - heard he has a ton more.

Good point.:D

hytenor
09-07-2011, 02:47 PM
Lookin' good, but gawdam you need to give Eric his shifter back!:lmao:

Is his hand getting cramps from holding the little one instead?

:p

TBob
09-07-2011, 03:11 PM
I pretty sure he's use to it. :rofl:

Is his hand getting cramps from holding the little one instead?

:p

Dick Foster
09-07-2011, 06:49 PM
Well if anyone knows who has the small ones it would sure as hell be you. :lmao:

I pretty sure he's use to it. :rofl:

TBob
08-20-2012, 12:47 PM
http://i98.photobucket.com/albums/l251/aztbob/Porn%20Taco%20Rev%202/IMG_3140.jpg
http://i98.photobucket.com/albums/l251/aztbob/Porn%20Taco%20Rev%202/IMG_4038.jpg
http://i98.photobucket.com/albums/l251/aztbob/Porn%20Taco%20Rev%202/IMG_3152.jpg
http://i98.photobucket.com/albums/l251/aztbob/Porn%20Taco%20Rev%202/IMG_1905.jpg

007max
08-20-2012, 02:47 PM
:jawdrop:

Jason4x4
08-20-2012, 06:13 PM
you can't hardly tell there is still a cab in there...

ninja
08-20-2012, 07:29 PM
looks so good

BOVADS
08-21-2012, 12:16 PM
:eek: wow:jawdrop:

nice fawkin work guys!!

Stealth 4x4
08-21-2012, 06:56 PM
Looks great!

*ROKTOY*
08-21-2012, 07:31 PM
Huba Huba

JJackson
08-21-2012, 08:30 PM
That is one sweet looking rig.

hytenor
08-22-2012, 12:48 AM
amazing!

howyadoin
08-23-2012, 08:41 AM
Nice work!

TBob
08-23-2012, 10:13 AM
Thanks all. Yea Chandler did a great job on Rev 2.0. That 14 bolt front is built with all Solid parts and should hold up well to the beating he'll give it.

:jawdrop:

looks so good

:eek: wow:jawdrop:

nice fawkin work guys!!

Looks great!

Huba Huba

That is one sweet looking rig.

amazing!

Nice work!

Dick Foster
08-23-2012, 11:33 AM
Chandler does beautiful work and makes things look real purdy.

Thanks all. Yea Chandler did a great job on Rev 2.0. That 14 bolt front is built with all Solid parts and should hold up well to the beating he'll give it.

rocracer
09-22-2012, 11:45 AM
that's insane... hard to believe that's the same rig. looks great.

TBob
11-05-2012, 01:42 PM
Got her out for a shake down run this past weekend - 2 days and 15-3/4 trails.
One poped hiem and a blown rear detriot - other than that she did awesome.
http://i98.photobucket.com/albums/l251/aztbob/chandler/IMG_5393.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/IMG_7271.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/155395_10151091843786965_273016842_n.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/523526_10152236613875088_976454179_n.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/46564_450098961702853_896617928_n.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/59439_450099125036170_1215041564_n.jpg
http://i98.photobucket.com/albums/l251/aztbob/chandler/557771_450099141702835_1869237068_n.jpg

hytenor
11-05-2012, 02:57 PM
you popped it's hymen?

:D

T-Ray
11-06-2012, 10:08 AM
Only a blown Detroit? Not bad. You worked that hero line on AN purdy good. Saw ya drive BM like it was a cakewalk. Good times!

TBob
11-06-2012, 11:43 AM
Chandler rig - Chandler driving. Yea he did great.
He didn't have a winch line so no suck-down, that would have helped.

Only a blown Detroit? Not bad. You worked that hero line on AN purdy good. Saw ya drive BM like it was a cakewalk. Good times!

MerMan
11-06-2012, 11:47 AM
Good times.

TBob
11-06-2012, 02:50 PM
Urial showin what a good time is...:xpimp:
http://www.youtube.com/watch?v=Vfr53fX51f4&feature=youtu.be

T-Ray
11-07-2012, 07:36 AM
Chandler rig - Chandler driving. Yea he did great.
He didn't have a winch line so no suck-down, that would have helped.

Right. That's what I meant ;)

Love how his rig turned out & it definitely gets some. Needs a couple more HP though :)

roktoy
11-08-2012, 09:18 AM
Wow....that came out really nice!
Glad it's working well for you guys.
Jay

TBob
11-12-2012, 02:21 PM
There some video of the rig in action in these videos.
http://www.youtube.com/watch?v=p14kJZkXRjE&feature=related
http://www.youtube.com/watch?v=9GgBVSfIA6c

Dick Foster
11-12-2012, 02:37 PM
Why do all these videos have to be accompanied by caterwauling and noise? Is it suppose to help get up and over the rocks or what?