: F&R Built Diamond Axles and TR beadlocks


yetti
06-07-2010, 07:37 PM
Front and Rear 4 Linked Diamond yota housings.


http://gallery.me.com/wes.cassiere/100473/IMG_1003/web.jpg?ver=12728432280001
http://gallery.me.com/wes.cassiere/100473/IMG_1004/web.jpg?ver=12728432480001

prerunnerguy
06-08-2010, 09:34 AM
What is the BS on the wheels?

MerMan
06-08-2010, 09:47 AM
You keeping your full hydro?

BOVADS
06-08-2010, 10:37 AM
good luck with sale, if they were 8 lug wheels theyd be sold:D

87pickup
06-08-2010, 01:51 PM
Already ditching the yota axles Huh? just finish it and go wheel.

yetti
06-08-2010, 07:57 PM
Don't want to ditch them they are fully built. Its just a feeler to see if they will go. If price is right I will sell them if not I will keep them.. I just don;t want to regret not doing tons after I break them. They are perfect now so IF I kill them it will be money wasted. Only want to sell if I can get rid of all of it.

Uriel I will be keeping the hydro since I ordered it for the tons in mind then had PSC shim it so it will work on the yota's for now.

Wheels are 3.5"bs.

Joe I will most likely end up keeping them unless price is right since buggy is now about 80% done right now anyway. Just checking options.

Thanks for the luck Bovads. If they were 8 lug I would be halfway there..

yetti
06-08-2010, 07:58 PM
Actually I want to keep them for a VW thing buggy I want to do after this is done but want the tons now. I am all f'd up on my priorities as usual.

MerMan
06-08-2010, 08:34 PM
Get it done man and lets wheel it. Just keep your fingers crossed with those 42s. I really recommend going smaller man,unless you plan to wheel with Sy.;)

yetti
06-08-2010, 08:37 PM
Hope have it done soon. Wanted 39" reds but could not find them at the time so got some 42" stickies for a good deal. If I had your turbo and foot I would really be worried. :)

87pickup
06-09-2010, 10:40 AM
I think if you are mindfull when it comes to binding it up, plus the fact you have a auto trans might make them last a bit longer.

MerMan
06-09-2010, 11:29 AM
I don't know if you already have the FROR brake upgrade but if you don't I highly recomend it especially when you break a birf.:2cents:

87pickup
06-09-2010, 01:28 PM
I don't know if you already have the FROR brake upgrade but if you don't I highly recomend it especially when you break a birf.:2cents:

I got it last week, need to find time to get it installed.

yetti
08-26-2010, 08:56 PM
I finally scored some tons to start building on. So axle's and wheels are for sale.

85 flopped
08-26-2010, 09:36 PM
How wide is the front axle? Also prices, unless I am totally retarded and missed it. That's a good deal on beadlocks for someone

yetti
08-26-2010, 10:35 PM
Front 2.5K
Rear 2K
Both for 4k

All OBO. If no one is interested in them complete end to end then I will part them out later.

Yeah good price on 5 wheels. All are brand new with no runs. Just used or mock up.

sethp
08-27-2010, 03:25 PM
Pm sent

yetti
08-27-2010, 08:22 PM
Thanks for the offer sethp. I will keep it in mind. Don't need a nother yota to build at the moment and if I did I would surely keep these axles. They are fully built for the next yota if I go that route..

Thanks Though I will keep it mind.

85 flopped
08-27-2010, 11:59 PM
So how wide are the axles again? shipping?

yetti
08-28-2010, 08:31 PM
So how wide are the axles again? shipping?

Sorry. been in CK all day and just got this. They are stock lengths. IFS length rear and stock front width. I am in Chandler so if you need them shipped it would be from 85224.

yetti
09-03-2010, 10:00 PM
Wheels are SOLD. FYI Paypal works with Credit Cards.

yetti
09-11-2010, 07:27 PM
I will sell these less thirds if anyone is interested. I aready have a buyer that wants the thirds. If some one wants the 30 spline front longs they will need to buy the lonfield flanges and hubs also asthey are already tapped and setup with the dowels all installed. I have pics if anyone needs them. will take paypal.

yetti
09-13-2010, 07:53 PM
Here are some better pics of the housings. I will start parting these out soon if no one takes them complete.

http://gallery.me.com/wes.cassiere/100473/My%20Photo_9/web.jpg?ver=12842521030001
http://gallery.me.com/wes.cassiere/100473/My%20Photo_7/web.jpg?ver=12842520820001
http://gallery.me.com/wes.cassiere/100473/My%20Photo_6/web.jpg?ver=12842520660001
http://gallery.me.com/wes.cassiere/100473/My%20Photo_5/web.jpg?ver=12842520550001
http://gallery.me.com/wes.cassiere/100473/My%20Photo_4/web.jpg?ver=12842520400001
http://gallery.me.com/wes.cassiere/100473/My%20Photo_3/web.jpg?ver=12842520230001
http://gallery.me.com/wes.cassiere/100473/My%20Photo_2/web.jpg?ver=12842520090001
http://gallery.me.com/wes.cassiere/100473/My%20Photo/web.jpg?ver=12842519830001
http://gallery.me.com/wes.cassiere/100473/My%20Photo_1/web.jpg?ver=12842520000001

ike
09-13-2010, 11:58 PM
I would love the front housing, just dont have the fundage right now.

yetti
09-16-2010, 10:02 PM
Longs and flanges with hubs are gone. Still have housings misc parts. Knuckles, brakes, rear alloy shafts, rear disc brakes.....

azrain
09-17-2010, 12:26 AM
rear disc brakes.....

Oh great, I need to spend more money? :D

Talk to you later about this... Dammit. :eek:

yetti
09-17-2010, 10:24 AM
Oh great, I need to spend more money? :D

Talk to you later about this... Dammit. :eek:

Roger that, I will hold them for you until we talk. Also any luck on getting your rubber all mounted and on the rig?

Thanks.

azrain
09-17-2010, 11:25 AM
Roger that, I will hold them for you until we talk. Also any luck on getting your rubber all mounted and on the rig?

Thanks.

Tires are on a truck somewhere between here and FL. Meanwhile all that bling just sits underneath my pile. :D

yetti
10-05-2010, 05:29 PM
I have both diamond housing's, knuckles, spindles, front calipers and highsteer arms drilled for 3/4" hiems.
I can post pics if needed. All parts in excellent condition.

shokk86
10-05-2010, 06:07 PM
have you already started putting your 60s together?

yetti
10-05-2010, 07:02 PM
Yes I have. I am about 1/2 way done with both of them. I am waiting on a few parts and some cash to finish both of them up. I have the 14 bolt shaved and ready for install after I get some parts fixed that ballistic shipped in error. Also waiting on rear ARB and front stub shafts and drive flanges. I should have them finished within a couple weeks depending on cash flow.

shokk86
10-05-2010, 11:52 PM
Yes I have. I am about 1/2 way done with both of them. I am waiting on a few parts and some cash to finish both of them up. I have the 14 bolt shaved and ready for install after I get some parts fixed that ballistic shipped in error. Also waiting on rear ARB and front stub shafts and drive flanges. I should have them finished within a couple weeks depending on cash flow.


cool, post up when your getting ready to wheel wes

yetti
01-18-2011, 10:17 AM
Bump. Still have both housings on a shelf collecting dust if someone needs them. Need new 17" 8 lug TR beadlocks.