: FS: Icon billet UCA, 95.5-04


PELLEY
06-25-2010, 02:27 PM
Used Icon billet upper control arms. I bought these used from another TTORA member. He told me they were some of the original Donahoo/Icon billet uppers that were used on their 7S truck. When I bought them a few parts were missing and I have filled in the blanks. They are in decent condition. They have some scratches and a few very small gouges on the bottom of the arms but nothing that is noticeable when installed and nothing that hurts the integrity of the arms. I had to machine two new spacers that were not included in the original sale, you will see them on one of the arms (darker color, machined from 4130). Also missing from the original sale were the spindle slugs which I got from Camburg (Icon wanted $200 for their replacements, $45 from Camburg with bolts, haha). I had to trim down the top misalignment spacer to make them fit right but they work as they are supposed to. I also had to sand some reliefs in the top of the arms so the misalignment's would not rub on the arms. They areas sanded are sanded smooth and look good, they do not take away from the strength of the arms as far as I can tell. The hiems are in good shape and do not need replacement, the uni-balls on the other hand are bad and need to be replaced (must buy from Icon, they are the short 1" balls that most stores do not sell). Also included are steal braided brake lines (not pictured, still on the truck, coming off next week).

http://i15.photobucket.com/albums/a400/lostagain619/IMG_0399.jpg
http://i15.photobucket.com/albums/a400/lostagain619/IMG_0400.jpg
http://i15.photobucket.com/albums/a400/lostagain619/IMG_0401.jpg
http://i15.photobucket.com/albums/a400/lostagain619/IMG_0402.jpg
http://i15.photobucket.com/albums/a400/lostagain619/IMG_0403.jpg
http://i15.photobucket.com/albums/a400/lostagain619/IMG_0404.jpg
http://i15.photobucket.com/albums/a400/lostagain619/IMG_0405.jpg

This is a complete kit (minus the uni-balls that need to be replaced). It worked and looked great. Wish I would have remembered to snap a picture of it on the truck but I forgot. The couple times I hit the dirt with it I had zero problems and it worked great. If I was keeping the truck I would keep the kit on there, but the truck is being sold (w/o the kit, haha). $350 is my asking price! I can also install if you want for extra. Shipping on your dime. Located in Palmdale, CA 93551. Thanks!!!