Do New Bed Bar Design Coming Soon!

[cb77DEMELLO]

Were changing the bed bar. Were making it better, making it cleaner and making it cheaper.

We were the first to come up with a bed bar and the first to find out that Hi-lift doesn't make all jacks the same. The first time a customer contacted us to tell us there jack didn't fit we thought we had made a mistake. The second time we thought the customer was confused.

After this happen a couple times we found out that Hi lift had a couple differnt bolt hole patterns out there. 90% of them are the same the 0ther 10% are differnt. This as you could imagine makes things a little difficult. So I set out to find a universal mount that would let you move it to make it fit. plus I wanted to make something a little more finished.

Not only will this lower the price for you but it will also allow you to buy the bed bar in two parts or just buy the mounts.

http://mk29.image.pbase.com/v3/89/565389/2/50498118.IMG_3299.jpg (http://www.pbase.com/davidianhale/demellooffroad&page=3)
These new mounts can be purchased to clamp to your roll cage or tube work or you can buy them in a package for your bed bar. They have a built in handle recess.

http://mishilo.image.pbase.com/v3/89/565389/2/50498121.IMG_3300.jpg (http://www.pbase.com/davidianhale/demellooffroad&page=3)
These are the proto types and the final product will have all threads and wing nuts to hold on the jack.
http://misheli.image.pbase.com/v3/89/565389/2/50498123.IMG_3301.jpg (http://www.pbase.com/davidianhale/demellooffroad&page=3)

As far as price goes all I can say at this point is they will cost less as a total package.

[adamgil]

nice! I like, I like. any idea on when they will be available? I was planning on ordering one from you guys soon. but might wait if this is available in the near future.

[cb77DEMELLO]

nice! I like, I like. any idea on when they will be available? I was planning on ordering one from you guys soon. but might wait if this is available in the near future.

I placed my order to the machinest, I'm just waiting for them to show up. we actully have the 05 ready also but I'm lacking a picture of that!

If you want the old style I have a few in stock, I'm sending them out for 159.00 each!

[TacoDell]

Were changing the bed bar. Were making it better, making it cleaner and making it cheaper.

We were the first to come up with a bed bar and the first to find out that Hi-lift doesn't make all jacks the same. The first time a customer contacted us to tell us there jack didn't fit we thought we had made a mistake. The second time we thought the customer was confused.

After this happen a couple times we found out that Hi lift had a couple differnt bolt hole patterns out there. 90% of them are the same the 0ther 10% are differnt. This as you could imagine makes things a little difficult. So I set out to find a universal mount that would let you move it to make it fit. plus I wanted to make something a little more finished.

Not only will this lower the price for you but it will also allow you to buy the bed bar in two parts or just buy the mounts.

http://mk29.image.pbase.com/v3/89/565389/2/50498118.IMG_3299.jpg (http://www.pbase.com/davidianhale/demellooffroad&page=3)
These new mounts can be purchased to clamp to your roll cage or tube work or you can buy them in a package for your bed bar. They have a built in handle recess.

http://mishilo.image.pbase.com/v3/89/565389/2/50498121.IMG_3300.jpg (http://www.pbase.com/davidianhale/demellooffroad&page=3)
These are the proto types and the final product will have all threads and wing nuts to hold on the jack.
http://misheli.image.pbase.com/v3/89/565389/2/50498123.IMG_3301.jpg (http://www.pbase.com/davidianhale/demellooffroad&page=3)

As far as price goes all I can say at this point is they will cost less as a total package.

Jason that price tag in the lower right corner works for me... I'll take two... :D LOL

[adamgil]

I placed my order to the machinest, I'm just waiting for them to show up. we actully have the 05 ready also but I'm lacking a picture of that!

If you want the old style I have a few in stock, I'm sending them out for 159.00 each!

posted this before I saw your other thread.

[cb77DEMELLO]

posted this before I saw your other thread.

If your interested I'm blowing out a rear hybrid bumper with a boo boo. e-mail for details.

[adamgil]

If your interested I'm blowing out a rear hybrid bumper with a boo boo. e-mail for details.

email sent.

[mikerox]

hey, what about the blingin new bumper for my 04? just kiding. i need to go back to work if i am gonna keep blowing money like a jackass. mybe after tax season i will ht you up form that bumper so i can look blingin at the mall.

[mikerox]

oops. just saw you post about moving forward with the new bumper.

[cb77DEMELLO]

I'm sure you would:)

[cb77DEMELLO]

oops. just saw you post about moving forward with the new bumper.

I understand. Wait till our Christmas specials hit the boards. As soon as I get my staff ready were going to be hitting the board with some deals:)

[SAR_Squid79]

If you want the old style I have a few in stock, I'm sending them out for 159.00 each!

In your other post you said that the ones you have left are for trucks with no bedliner. What exactly do you mean? Does Line-X count? DO the ones you have left, have the High-Lift mounts?

[cb77DEMELLO]

In your other post you said that the ones you have left are for trucks with no bedliner. What exactly do you mean? Does Line-X count? DO the ones you have left, have the High-Lift mounts?Sorry no plastic liners linex should be fine. and yes they both have jack mounts.

[GOT COPE?]

Bump. How bout them clamps? They available yet? What size tube do they fit? I assume 1.5". How much for the clamps?

[cb77DEMELLO]

Bump. How bout them clamps? They available yet? What size tube do they fit? I assume 1.5". How much for the clamps?

We are working on our first batch this week. We changed the way they mouted to the bed also.