possible new differential protection

[rokbrkr]

Hi guys, I put one of these together for a local customer the other day, and was wondering if this is something you guys would be interested in as a mail order item, it would require welding the mounting tabs on for installation, cost under $80 with shipping, please let me know what you think :D

Also, Please let me know if this is not the right place for this :confused:

[Timbuddha]

Great idea, but I would want to see it come further forward and protect the yoke.

[Big-A]

Hi guys, I put one of these together for a local customer the other day, and was wondering if this is something you guys would be interested in as a mail order item, it would require welding the mounting tabs on for installation, cost under $80 with shipping, please let me know what you think :D

Also, Please let me know if this is not the right place for this :confused:

......that seems like a well thought out simple idea, I would definetely buy that product........I would love to see a the scrape plate extend over and partially up the e-locker housing on mine,you could use the existing bolt locations on the e-locker to support the top part of the scrape plate. :2cents:

[tony56]

[QUOTE=rokbrkr]Hi guys, I put one of these together for a local customer the other day, and was wondering if this is something you guys would be interested in as a mail order item, it would require welding the mounting tabs on for installation, cost under $80 with shipping, please let me know what you think :D

Also, Please let me know if this is not the right place for this :confused:[/QUOTE

I'd buy it but it would also have to protect the yoke

[Toyo4x4]

I would buy one. Seeing the time involved in fabbing one (Hyentor :D ) and the cost of steel around here, I would be dumb not too. I would like it to come up further but not much, I don't want to have to mess with axle wrap pushing the plate in the driveline, like Hyentor mentioned in a previous post.

[dstrbdone]

......that seems like a well thought out simple idea, I would definetely buy that product........I would love to see a the scrape plate extend over and partially up the e-locker housing on mine,you could use the existing bolt locations on the e-locker to support the top part of the scrape plate. :2cents:


Kinda something like this? I just got done with this one.

http://i5.photobucket.com/albums/y170/dstrbd1/diffslider007.jpg

-Trent

[Big-A]

Kinda something like this? I just got done with this one.

http://i5.photobucket.com/albums/y170/dstrbd1/diffslider007.jpg

-Trent

that picture is actually very close to what I had in mind..........looks good dude......I would paint mine red though ;)

[dstrbdone]

Mine may end up just black after getting scraped up a few times. Its easier to touch up that way.

-Trent

[jh3]

I would buy one. Seeing the time involved in fabbing one (Hyentor :D ) and the cost of steel around here, I would be dumb not too. I would like it to come up further but not much, I don't want to have to mess with axle wrap pushing the plate in the driveline, like Hyentor mentioned in a previous post.I'm in

[rokbrkr]

Kinda something like this? I just got done with this one.

http://i5.photobucket.com/albums/y170/dstrbd1/diffslider007.jpg

-Trent

I thought about mounting it with U-bolts like that, but prefered the clean look of the tabs, nice work!

[TacoCrazy]

Definatley interested..Work on an E-locker rear? Have to remove to drain oil? Longer version to protect yoke? Would like to have it a little taller in the rear..Thanks

[rokbrkr]

Thanks for all the input! I will play around with the design a little bit and let you know what we come up with, any other suggestions in the near future would be greatly appreciated :D , thanks, Steve.

[mojavehanna]

Ive been waiting for something just like that, I would want more yoke protection as well. Are there any worries/ difficulties welding tabs to the housing? Do you have to dissasseble it or drain the oil or anything?

[Paul]

I would also buy one.

[TacoCrazy]

Ive been waiting for something just like that, I would want more yoke protection as well. Are there any worries/ difficulties welding tabs to the housing? Do you have to dissasseble it or drain the oil or anything?
Drain the oil...Weld er' up..