TTORA Forum banner

2.7L lift questions!!

1K views 3 replies 3 participants last post by  Chief 
#1 ·
So I have the HD 2450 billies right now and TT 2.5ift spacer and stock springs. Rides stiff as hell, and want a change. So, options are:

Get 5100 and use stock springs. It's a preload, so can I expect the exact same ride?

Keep the current billies and get the eibach 3" spring? Seems like a very stiff spring rate tho, especially w no extra weight on the front end.

Best option would probably be the TT coil over and the 500lb spring rate, but that's out of the budget right now.

Any other suggestions?? :deadhors:
 
#3 ·
#4 ·
MORE then enough information!! I've done a bunch of research, so I've got a decent idea of what I want.
The link for the OME stuff helped alot. Learned the spring rate is much closer to what I need. I think I'll be getting the 881 and the 5100's down the road.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top