Howdy there,
Started having some issues with my clutch a couple weekends ago. Periodically it will stick to the ground and not return. I did some research and found a couple posts on here and other sites that had stated that it could be clutch slave/master cylinder. So i started with the slave. In order to pick the part up from town i put a piece of rope going from the clutch pedal up to the oshit handle on the driver side. Every time i shifted i had to pull on the rope to get the clutch to come back up .....Finally got home after driving in the city for 30 minutes and put the slave in. Worked for about 20 minutes, then started doing it again. Figured that I might as well try putting in the master cylinder. Same thing. Ive checked the lines to see if there is any leaking going on and i couldn't find any. Ive also tried bleeding the system multiple times.
Any suggestions would be appreciated....
-Bow
Started having some issues with my clutch a couple weekends ago. Periodically it will stick to the ground and not return. I did some research and found a couple posts on here and other sites that had stated that it could be clutch slave/master cylinder. So i started with the slave. In order to pick the part up from town i put a piece of rope going from the clutch pedal up to the oshit handle on the driver side. Every time i shifted i had to pull on the rope to get the clutch to come back up .....Finally got home after driving in the city for 30 minutes and put the slave in. Worked for about 20 minutes, then started doing it again. Figured that I might as well try putting in the master cylinder. Same thing. Ive checked the lines to see if there is any leaking going on and i couldn't find any. Ive also tried bleeding the system multiple times.
Any suggestions would be appreciated....
-Bow