TTORA Forum banner

bilstein 5100

2K views 1 reply 2 participants last post by  DreamMachine 
#1 ·
I have an 09 tacoma, that has remained stock, other things seem to get in the way all the time. I recently received 4 5100's, my question, the rear is stock height, and im really looking at just leveling. Should I set the split ring on the shock body in the 3rd notch up? Ive read that with the truck being stock, that the full 2.5 inch lift in the front may be too high. The truck is a SR5 non TRD. Thanks for the info
 
#2 ·
are you using the stock springs? If so then i'd use the middle notch for a leveling effect.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top