TTORA Forum banner

question after installing saw 2.0

1K views 3 replies 2 participants last post by  1990dlx 
#1 ·
Alright I installed my new saw 2.0s today and they look and drive great, There is 1 inch of thread showing above the collar thats how I received them. When I lowered the truck back off the jacks the truck sits almost the same level that my small little spacer on top of the coilover had it at. And my cv fins are touching slightly more than they were with the spacer lift, I have read that people needed to show like 2.5 inches of thread to get 3 inches or something like that but I am only at 1 inch of thread.

 
See less See more
1
#2 ·
How long are your springs? I believe the SAWs came with 13" springs in the past, but got conflicting info lately that they now have 14" springs. If they are 14, that would explain the difference in threads showing.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top