Tundra on 33/Coilovers

[JHMphoto]

Looking for pics of Tundras on 33s and Coilovers. Also wondering how the backspacing on stock rims work with that combo. Rubbing, etc..

Thanks!

[TMS2U]

You can go with standard BS which is 4.5" You should use 8" wheels with 33 (285/75) tho.

You will be likely to get some rubbing at full turn with suspension compresson only. You could go with a 3 5/8" BS, but then you will rub at the pinch weld of the fender instead.

[CornbredNE]

Looking for pics of Tundras on 33s and Coilovers. Also wondering how the backspacing on stock rims work with that combo. Rubbing, etc..

Thanks!

The green Tundra on our website at www.CornfedSuspension.com is on 285/75r16's or a 33x10.5 (roughly) tire. This truck was on one of our 2.5" kits which lift the front 2.5" and rear 1.25" and it ran 16x8 rims with 4" backspacing and cleared completely except on the hardest bumps when turned tight it would rub the back of the fenderwell (so lightly though that you couldn't hear it). I can send some more pics of this size setup to you via email if you'd like.

Thanks,
David

[dyogim]

Here's a pic of my truck before the SAS. I have 285-75-16 GY MTR's mounted on 16x8 IS rims. BS is 4 5/8". Lift is Daystar AAL in the rear and Teamwest SAWS(double heim SAWS) in the front. Rubbing was very minimal on the frame at full turn and compression. I also removed my factory molded mudflaps because of slight rubbing at full turn.

http://www.tundrasolutions.com/photopost/showphoto.php/photo/9368/size/big/sort/1/cat/6153

[trd2001]

did you regear after you installed the 285's? I just put in 265 /75/16 BFG AT's. Whne i lift it i give these tires and rims to my dad for his Tundra. I tow often, thats why i am asking.

[dyogim]

did you regear after you installed the 285's? I just put in 265 /75/16 BFG AT's. Whne i lift it i give these tires and rims to my dad for his Tundra. I tow often, thats why i am asking.

I didn't regear at all. I had the 3.91 ratio. Another tundra owner changed his to 4.3's because he tows quite a bit and I believe running 285-75-16's.

[Murderman]

I am running 265/75's on Kings at 2" in the front, and a Wheelers 1 1/2" AAL in the rear. I can't imagine clearing 285/75's at this lift height with the big giant fender flares.

The 3% increase in diameter from the 265/70's has screwed up the shift points in town [converter lock-up in particular], and certainly doesn't help towing of the Heep.

4.10's would put me just barely lower than stock, but I am looking for some good used factory Toy 4.30's for towing.

[shadymilkman]

my freinds got a 04 tundra with kings and camburg upper arms hes got 305(33") he had to trim the tip of the front bumper a little but with 285 you wont have a problem with rubbing

[01 Tundra]

Here is a picture of mine before I did my SAS, I was running Team West coilovers cranked up to about 3-1/2" and also had Total Chaos upper arms. I was running 285x75x16's on 16"x8" rims that had 3-5/8" B.S. I had to grind the pinch weld down so the tires would clear at full compression (you will also have to trim the lower corners of the front bumper if yours is stock). I have plenty of pictures if you need any more.

http://img.photobucket.com/albums/v419/01tundra/winch004.jpg