30x9.5R15 Dueller M/Ts

[91toyota4x4]

I've got 4 30X9.5R15 Dueller M/T's on stock toyota steel wheels. Around 50% tread left on them. They have great treadwear and will probably last another 20k. No cuts or plugs or patches in them at all. These are great tires to put on your stock toyota 4x4 without a lift, they do really well offroad.

Asking $200 obo

They will probably be available sometime next week

email me at ryanjohn at ufl dot edu

[91toyota4x4]

I got my stock (I guess) hitch for sale. It's a 2" reciever and is beefy enough to tow anything a Toy truck can pull within reason. I'm not sure but I think class II or III rating. It doesn't have any markings on it though. $75 OBO. Came off of a 91 Ext Cab so it will most likely fit all 89-95 trucks and probably 86-88s too, but I'm not sure.

[usmcracing]

Duda that can be NeilFab'd into a driveshaft.

[bosco]

Yes. You might want to think about hanging on to it for when you do your SAS. Just my :2cents:

Bryan

[91toyota4x4]

I'm not doing an SAS anytime soon. Unless I find a money tree somewhere.

My apartment doesn't have enough room to store all this stuff. My closet is alreay full of leaf springs :saw:

[taco420]

There is an 81 truck on yotatech in ga for $950 obo. I think the motor needs a little work but if anyone is looking to make a trail truck this thing looks like it's in good shape.

http://www.yotatech.com/showthread.php?t=68751
thats a rip off. i got my 81 with 40,000 original miles, new bfg a/t's, and in perfect running condition for 500 bucks. :D if it had a running motor the one for sale would be worth it. oh yeah, when my girlfriend crashed it on 275 my insurance gave me $2000. and they gave me the truck back which i rebuilt for 300 bucks and it runs like a bat out of hell. :D :D just my :2cents:
p.s. i will never let the wonder truck out of my sight again.

[91toyota4x4]

Found this in Ocala4Sale might be good to look at if you're looking for a beater.

1984 Toyota pickup 22R, new tires, tool box, new head gasket, spark plugs, clutch, very clean engine, A/C-heater, 5 speed, bed liner, lot of extra parts included, rust on the tailgate and around the bed. $1000.OBO Call: 352-461-8651

[91toyota4x4]

http://www.floridajeepers.net/viewtopic.php?t=20515&highlight=

From the pictures it looks kind of ghetto fabbed though.

[usmcracing]

I've never seen that one, 5.33 gears? It looks okay but could use some bumpers and sliders. I can't believe the Jeep Geeks let him post a Toyota for sale.

[cancel]

they are toy axles if you look closely. so, 5.33 is just some number this jeep guy pulled outta his @$$ (might have been in there in the first place b/c he's a jeep guy). if you look at the rear hanger, you can see it's a dropped hanger so that means hang-up, but it's nothing you couldn't remedy in the long run.

I'm curious as to the owner's input on this thing. I would hope that he's got some bling axles in it cos those 38's have got to put a hurtin on the birfields (if he wheels it).

[usmcracing]

The rear hangers are stock 4Runner lower control arm brackets. Mine hang really low like there and its hard to see them untill you lift it. I'm sure it has 5.29s and I bet the axle shafts are all stock. I'd also like to hear what the owner says about it so I may call them and ask some ??. I don't think $4k is a bad price if the engine runs good and there isn't any thing major wrong with it.

[91toyota4x4]

The front is is what I don't like. Notice the tie rod is still in the stock position, obvously not high steer. And the shocks look like they are mounted to the IFS upper shock mount. It looks like it would need a little work to get it to flex.

[usmcracing]

Yeah but atleast it's not IFS. You'll spend less on the parts it needs to make it a good flexly wheeler then you would if it were still IFS. Put some chevies in the rear, have NeilFab make a better front spring hanger with some rear Pickup springs, and get the Trail Gear Hysteer and you're flexing with a nice Runner with room for Five. Also loose the 38"s for somewhere around a 35 to 37/12.50. I don't think it'd be a bad buy.

[J94runner]

i agree. looks like a good price. most of the big dollar stuff is done.

[91toyota4x4]

I need a non leaking IFS steering box. 89-95 the later version, I think it starts in 89 but maybe 88.

If you have an extra or know where I can get one for cheapish let me know!

[usmcracing]

5 mins worth of USMC time wasted to find your gear box, :xpimp:

http://cgi.ebay.com/ebaymotors/1989-Toyota-Pickup-4x4-Steering-Gear-Box_W0QQitemZ8036694321QQcategoryZ33589QQrdZ1QQcmd ZViewItem

http://cgi.ebay.com/ebaymotors/Toyota-Truck-4-Runner-IFS-4x4-Power-Steering-Box_W0QQitemZ8036957580QQcategoryZ33589QQrdZ1QQcmd ZViewItem

Not sure if these two will work but here that go, 2nd one is a FJ60 box BTW
http://cgi.ebay.com/ebaymotors/Toyota-pickup-4runner-22r-22RE-IFS-power-steering-box_W0QQitemZ8037976887QQcategoryZ33589QQrdZ1QQcmd ZViewItem

http://cgi.ebay.com/ebaymotors/TOYOTA-LANDCRUISER-FJ60-OEM-POWER-STEERING-BOX-USED_W0QQitemZ8038404658QQcategoryZ33589QQrdZ1QQcm dZViewItem

THe USMC will send you a bill. :2cents:

[91toyota4x4]

Yeah I was gonna see if I could find one for a little cheaper before going to ebay, those all seem to go for $70ish. Got to check the pick-n-pull.

This sterring thing is putting a nice little setback in my SAS plans :rolleyes:

[usmcracing]

Yeah I know what you mean, I had to buy a starter and there was the little wreck thing I had a few months back. Neil may have one sitting around or know where one is.

Steven

[91toyota4x4]

Ok Steven. Since you can find $1 3rds why not find us some $1 steering boxes??

[usmcracing]

Dude that was luck, I look at Toyota parts on ebay all day long at the tax payers dime. LOL

I think I'm just going to wait till I SAS my Runner and either rebuild the leaking box or buy a auto zone rebuilt one.

Where is you box leaking from?

[Mikeyk280]

I got a 2000 IFS steering box, but ya gotta buy the whole truck with it... :O) have you called any of the yards around Jacksonville... I'm sure one of us could swing by and pick it up for you...

Mike

[Iggy]

www.badlandbumpers.com email the owner he might have one

[91toyota4x4]

www.badlandbumpers.com email the owner he might have one

Why????

[Iggy]

he has a bunch of toyota parts for sale he mentions it on his site

[cancel]

I got a 2000 IFS steering box, but ya gotta buy the whole truck with it... :O) have you called any of the yards around Jacksonville... I'm sure one of us could swing by and pick it up for you...

Mike

not the same box, nice plug though

[usmcracing]

http://cgi.ebay.com/ebaymotors/Toyota-Truck-4-Runner-IFS-4x4-Power-Steering-Box_W0QQitemZ8039508476QQcategoryZ33589QQssPageNam eZWDVWQQrdZ1QQcmdZViewItem

[usmcracing]

NOT CHEAP AT ALL
http://cgi.ebay.com/ebaymotors/Toyota-Pickup-4Runner-89-91-Power-Steering-Gear-Box_W0QQitemZ8039462556QQcategoryZ33589QQssPageNam eZWDVWQQrdZ1QQcmdZViewItem

[bosco]

NOT CHEAP AT ALL
http://cgi.ebay.com/ebaymotors/Toyota-Pickup-4Runner-89-91-Power-Steering-Gear-Box_W0QQitemZ8039462556QQcategoryZ33589QQssPageNam eZWDVWQQrdZ1QQcmdZViewItem


:eek: WTF?!? They have got to be smokin something!!!

[91toyota4x4]

not really

Marlin:

Rebuilt IFS Steering Box
Looking for an IFS steering box for your crossover steering? We have both core and rebuilt steering boxes for your conversion. Rebuilt units are thoroughly cleaned and inspected. All bearings and seals are replaced. Spool valve is power flushed and unit is pressure tested.

Add To Shopping Cart MC-13551, Rebuilt IFS Steering Box, $299

Trail Gear:

IFS Steering Boxes

High quality remanufactured IFS boxes for your crossover steering. We carry both newer and older styles. For crossover steering on 79-85 trucks we recommend the early style box but you can also use the late style if you wish. Early style (left in photo) fits 86-88 Pickup and 86-89 4Runners. Late style box (right in photo) fits 89-95 Pickup and 90-95 4Runners. All boxes are completely rebuilt with new seals and bearings. Each unit is tested before shipping.

Add To Cart IFS Steering Box 86-88, $299, 130010-1
Add To Cart IFS Steering Box 89-95, $399, 130006-1

[bosco]

Or you can be like me and go to the junk yard, get VERY lucky and happen to see one sitting on the ground in front of the shop. Go ask how much and they reply $50. You say cool and your buddy COUGH (neil) says "you should load that up so noone nabs it." So you do and then you go scrounge through the yard for other stuff. Dont find alot so you leave. Then as you are leaveing your dad asks, "did you ever go pay for that steering box?"and you say "SWEET, no I didnt...FREEBEEE!!!" SHHHH dont tell...:D

[91toyota4x4]

OK here's the deal. When I got my front axle the guy said that it was supposedly 4.10 gears but he had bought the axle as a spare and didn't know for sure. Well today I finally got around to opening it up, it's 4.38 :rolleyes: Whoopee 35 ring rear teeth and 8 pinion teeth. I have like the rarest gear ratio possible in there :rolleyes:

My question is, would anyone be interested in trading this 3rd for a 4.10 one? The 3rd is in good shape as far as I can tell. If one of you guys are going to be regearing anyway then why not help a brotha out!

I figured I would just throw it out there :D

[cancel]

i have a lead on some 85 stuff, i'll let you know in a few days.

[curiousgeorge]

Hey, I gota set of 4.10 gears, I would be happy to setup for you. You would just either need to bring it to me or ship it to me...

[91toyota4x4]

Sweet, I might get back to you on that. The other option is going to a pick and pull or something and look for a V6 4.10 3rd for cheap.

[usmcracing]

I can have one of my stock 4.10 3rds from my old 84 for $50. I'll let you pick which one you want. I have the pair both in great shape.

Steven

[91toyota4x4]

http://www.floridajeepers.net/viewtopic.php?t=23679

[usmcracing]

Ryan do you always hang out on the Jeep site? LOL

That truck is listed on FL4x4 too.

[boggyboy]

ya i saw that truck its badass my buddy will on fjoa showed me it i am thinkin bout buyin it as a project!

[Iggy]

its a redneck bogger truck there could be so mutch wrong with ti just like the one we saw at the bash the blue and white on that the retard blew his motor on

[usmcracing]

ya i saw that jeep its badass my buddy will on fjoa showed me it i am thinkin bout buyin it as a project!

Uh, Its a TOYOTA thats posted on a Jeep site.

[91toyota4x4]

ya i saw that jeep its badass my buddy will on fjoa showed me it i am thinkin bout buyin it as a project!

It's a toyota lol.

Yeah it would be a good project. Iggy you can always take off the 7 inch springs and sell the tires, or run them. He never finished it and it was never bogged, at least hard core like he was building it to.

For $1000 it would be a pretty good start.

[boggyboy]

sorry made a mistake but ya i am havin my friend go take a look at it and he is ganna check it all out and if she looks good i am ganna give the guy cash and make that beast my new project lol

[usmcracing]

For the price it'd be worth it if it runs and isn't too rusted.

[bosco]

its a redneck bogger truck there could be so mutch wrong with ti just like the one we saw at the bash the blue and white on that the retard blew his motor on


Its still a yota man. It can be repared.

[boggyboy]

i am ganna go check the truck out this weekend and offer him a grand for the yota. do yall know what insurance u have to have in florida can i just get liability for that truck?

[bosco]

i am ganna go check the truck out this weekend and offer him a grand for the yota. do yall know what insurance u have to have in florida can i just get liability for that truck?


I think thats all you need.

[usmcracing]

Thats all I have.

[boggyboy]

sweet ya i just talked to the guy and all i need to do is extend the front drivshaft and get a tune up and possibly replace head gasket which isnt to bad and i am ganna make my own flat bed on it and its got 160,000k miles which i thought was pretty good seein that its an 85. all in all for the money it sound pretty sweet it shall b my first project truck and i am lookin forward to emptyin all my pockets on it!! lol

[usmcracing]

How much rust did the guy say it has?

If you want it for mud holes and stuff then the 7" springs will work. If you want it to flex and go on Fl trails then get some Trail Gear, Marlin, or All Pro springs.

Did it have stock gears?

[bosco]

Awesome man! Sounds like you are well on your way. And I do highly recomend getting rid of those skyjacker front springs. They are stiff as all heck! I had that same set on my old 84 ext cab i used to have and man do they ride hard!!!