Crankinf Torsion Bars to Level T100

[TeeWunHun]

the front end of my 95 x-cab 2wd sits around an inch lower than the back and I'd like to level it out.
I noticed that it has torsion bars and from my experience w/ Nissans I know that if you tighten or losen them it'll lower or raise the truck...

So can I do this on my truck?

if so, will it affect the camber very bad if I just raise it 1 inch? and will I have to get the front end realigned?


Thanks

[AK98Taco]

It will affect the alignment, so get it aligned afterwords.

The ride will be stiffened.

[TeeWunHun]

what about the camber?


are there any other ways to raise the front just an inch or two? (not lift or anything tho)

[ShowStop]

what about the camber?


are there any other ways to raise the front just an inch or two? (not lift or anything tho)
He already said cranking the torsion bars will affect your alignment. It really only changes the camber, so that is what has to be adjusted.

You can get ball joint spacers:
http://www.sdori.com/SDORS%20spacer%20page.htm

Available from www.TRDparts4u.com:
http://www.tacomaterritory.com/forum/showthread.php?t=6896