PDA

View Full Version : Need ECU diagram for 2000 2.7L

akshunj
12-05-2004, 10:17 AM
If anyone can post it from the FSM. A 2001 or 2002 will work as well. Thanks.
Gadget
12-05-2004, 11:18 AM
You should post what you are trying to do more specifically.

Gadget

www.GadgetOnline.com
akshunj
12-05-2004, 11:22 AM
:0) I just need the diagram. If you really want to know email me. I won't post it on the board yet until we're done.
akshunj
12-05-2004, 01:41 PM
bumpin to the top
Mike
12-05-2004, 02:07 PM
If anyone can post it from the FSM. A 2001 or 2002 will work as well. Thanks.
Not familiar with the four banger part numbers, hope these are the right docs.

Later,
....Mike

http://www.norcalttora.com/~mike/pdf/2rz-fe.pdf
http://www.norcalttora.com/~mike/pdf/3rz-fe.pdf
akshunj
12-05-2004, 02:08 PM
~hugs Mike~

THANK YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!
Mike
12-05-2004, 02:37 PM
So is the four-banger a 2rz-fe or a 3rz-fe?

Later,
....Mike
Schuey2002
12-05-2004, 03:05 PM
The 2RZ = 2.4L 4-banger..
The 3RZ = 2.7L 4-banger..
akshunj
12-05-2004, 03:21 PM
yeah what they other dood said, the 2.4 in the low rider is a 2RZFE and the 2.7L in the PreRunner and 4X4 is the 3RZFE. Same engine, longer stroke in the 2.7L.
mrbigbri
12-05-2004, 03:32 PM
Remember, that's from a 2003 manual... and may not be like a 2000. 8-)

Brian
akshunj
12-05-2004, 05:44 PM
They'll be the same, I'd almost rather have the 2001 or up because they all have Cali emissions. Only some of the 2000 models do and the manuals almost always seem to cover the ones that do not.
wslytoy
12-05-2004, 08:13 PM
:0) I just need the diagram. If you really want to know email me. I won't post it on the board yet until we're done.

tell us or you will DIE!!! J/K, I'm assuming it's something w/ the turbo project?
akshunj
12-06-2004, 01:06 PM
nope, not to do with the turbo. Not yet anyway.
akshunj
12-07-2004, 12:08 PM
Not familiar with the four banger part numbers, hope these are the right docs.

Later,
....Mike

http://www.norcalttora.com/~mike/pdf/2rz-fe.pdf
http://www.norcalttora.com/~mike/pdf/3rz-fe.pdf
huge props to Mike. I was just informed your diagram saved the day and some $$$ too.
SilverTaco
12-07-2004, 09:20 PM
How long til you are through with this little project? I have the 3rz and have been waiting for you to get this out. Very interested.
akshunj
12-08-2004, 08:26 AM
I'll be home from Kuwait on the 21st. I figure the week after Christmas I'll have some results.
SilverTaco
12-08-2004, 01:10 PM
Cant wait. Good luck. Is this an easy mod? I know on Delphi it was going to be around 300$ or so but i am just wondering can it be a "bolt on" type thing?
tmacie
12-08-2004, 01:56 PM
:0) I just need the diagram. If you really want to know email me. I won't post it on the board yet until we're done.


OK.....no holding out on us!!! No fair No fair!!! You still doing that dyno run sometime soon? I might come down for that if I'm free for that day.


Travis
akshunj
12-08-2004, 02:09 PM
OK.....no holding out on us!!! No fair No fair!!! You still doing that dyno run sometime soon? I might come down for that if I'm free for that day.

Travisyeah hey I am probably going to schedule about 2 hours of dyno time one of these days. If you want to come down that's all good but I should be all set with the stock Tacoma I requested earlier. A stock airbox might be useful though.

yeah hey shoot me an email richard.jackson1@asab.centaf.af.mil