Bentup.com REAR bumper pics!

[AngryAndy]

Well, its almost 100% done.

Looks sweet as hell.

First, AJ got a new welder....I LOVE it, it makes MY welds look good. Really easy to use, and SUPER powerful. I was having so much fun just welding away with it....

http://www.parksoffroad.com/tacomamods/fjcruiser/bentupfjrearbumper/newwelder.JPG


http://www.parksoffroad.com/tacomamods/fjcruiser/bentupfjrearbumper/rear1.JPG

http://www.parksoffroad.com/tacomamods/fjcruiser/bentupfjrearbumper/rear2.JPG

There will be a flip-down step added on each side for a better access to the roof rack...

http://www.parksoffroad.com/tacomamods/fjcruiser/bentupfjrearbumper/rear3.JPG

The "master" at work...

http://www.parksoffroad.com/tacomamods/fjcruiser/bentupfjrearbumper/rear4.JPG


http://www.parksoffroad.com/tacomamods/fjcruiser/bentupfjrearbumper/rear5.JPG

This FJ also has a jerry can setup on his roof rack....kinda cool.



http://www.parksoffroad.com/tacomamods/fjcruiser/bentupfjrearbumper/jerrycans.JPG

[Paul]

Sick. It looks a lot better than some of your prototypes. You going to get new tires before the 'con?

[LAW]

sweet, im so tempted to trade my truck in

[AngryAndy]

If all goes well, yes. I need the lift first....looks like Revtek has donated a lift. Once that arrives, it will be installed and then I will get some meats on there. and of course a rear bumper. Possibly looking into creating some kinda front skid too.

This rig already has the Revtek lift, bling bling wheels and tires. Little too flashy for ME, but I do think they look nice. They would get beat to hell on a serious trail though....He is running 295/70/17's...and he is getting a front bumper, a rear bumper and sliders all powdercoated...

http://www.parksoffroad.com/tacomamods/fjcruiser/bentupfjrearbumper/wheels.JPG

[SAR_Squid79]

I need the lift first....looks like Revtek has donated a lift. Once that arrives, it will be installed and then I will get some meats on there. . .
Doesn't RevTek = Blocks? :scared:

You're not going to put blocks on your stuff are you? :confused:

[LAW]

Doesn't RevTek = Blocks? :scared:

You're not going to put blocks on your stuff are you? :confused:
its a free lift, i dont know if there are any coilovers yet

[hawaiianbro]

Doesn't RevTek = Blocks? :scared:

You're not going to put blocks on your stuff are you? :confused:

Spacers front / rear.

[Darwalk]

Doesn't RevTek = Blocks? :scared:

You're not going to put blocks on your stuff are you? :confused:
no leafs in the back= no blocks :D

[AngryAndy]

Doesn't RevTek = Blocks? :scared:

You're not going to put blocks on your stuff are you? :confused:


Hmm...lets see....FREE spacer lift....or....$900ish for the OME stuff.

I will opt for the free stuff....give a testing out period... Then possibly get the OME stuff and have firsthand knowledge of the differences between the two.

[SAR_Squid79]

I just thought that all of RevTek's kits were Blocks in the rear.

I wouldn't put blocks on my truck even if they were free.

[4TACXOMA4]

I just thought that all of RevTek's kits were Blocks in the rear.

I wouldn't put blocks on my truck even if they were free.
They would be if the FJ had leafs in the rear. Instead, it is 4 coil spacers.

[SAR_Squid79]

OOOOHHHHhhhhhhh! :doh:

Okay - Somehow I've missed that.

[snowchucker]

First, AJ got a new welder....I LOVE it, it makes MY welds look good. Really easy to use, and SUPER powerful. I was having so much fun just welding away with it....



damn andy... i think you still need to work on those welding skills there...lmfao.. :eek:
i can tell aj did NOT weld that rear bumper together. :D

[viter]

nice looking bumper - follow the lines well!
and I really like the step idea!

2 questions: any recovery points + hitch and where are you putting high-lift - on the roof?

[AngryAndy]

I met up with some FJ folks this weekend at Frank Raines; afterwards, I headed up to Bentup to (hopefully) begin the fabrication of a front skid plate.... (yes, we got a good start, but Im not posting ANYTHING till its all done....lol)

When I got there, the Yellow FJ was in the shop getting all the bling installled...so the next 2 hours were spent installing the front and rear bumpers, sliders, winch, control box, front lights, and rear backup lights. All metal was powdercoated, and turned out awesome.

I am seriously jealous....I want it all, and I want it NOW!

http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo98.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo94.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo93.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo86.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo83.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo73.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo69.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo64.jpg

[AngryAndy]

The whole gallery of pics can be seen here...

http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/

[Tankota]

How about the Donahoe kit that supposed to be coming out? :D



Hmm...lets see....FREE spacer lift....or....$900ish for the OME stuff.

I will opt for the free stuff....give a testing out period... Then possibly get the OME stuff and have firsthand knowledge of the differences between the two.

[YotaTaco]

Are those the back up sensors mounted in the new rear bumper?

[snowchucker]

yes the bumper does have backup sensors integrated into it.

[98taco4x]

Man that is a sweet looking FJ, I would take it even if it does have those rims :D

:clap: :clap: To AJ for some killer looking armor

[02tacotim]

Minus the super gay dubs that is what the new FJ should look like. Looks awesome guys. Big props to Bentup. Now it just needs to get dirty.

Tim

[Super Doody]

Minus the super gay dubs that is what the new FJ should look like. Looks awesome guys. Big props to Bentup. Now it just needs to get dirty.

Tim

Dubs are 20s and above. Those are 17s.

[Super Doody]

I met up with some FJ folks this weekend at Frank Raines; afterwards, I headed up to Bentup to (hopefully) begin the fabrication of a front skid plate.... (yes, we got a good start, but Im not posting ANYTHING till its all done....lol)

When I got there, the Yellow FJ was in the shop getting all the bling installled...so the next 2 hours were spent installing the front and rear bumpers, sliders, winch, control box, front lights, and rear backup lights. All metal was powdercoated, and turned out awesome.

I am seriously jealous....I want it all, and I want it NOW!

http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo98.jpg


Looks good! What those 4 bolts above the hitch for?

[thebeast8888]

yes the bumper does have backup sensors integrated into it.
that shits gotta b anoying as hell on the trail!

[MysticGold04]

I met up with some FJ folks this weekend at Frank Raines; afterwards, I headed up to Bentup to (hopefully) begin the fabrication of a front skid plate.... (yes, we got a good start, but Im not posting ANYTHING till its all done....lol)

When I got there, the Yellow FJ was in the shop getting all the bling installled...so the next 2 hours were spent installing the front and rear bumpers, sliders, winch, control box, front lights, and rear backup lights. All metal was powdercoated, and turned out awesome.

I am seriously jealous....I want it all, and I want it NOW!

http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo98.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo94.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo93.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo86.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo83.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo73.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo69.jpg
http://www.norcalttora.com/~andy/fjstuff/BentupFJbumperssliders/photos/photo64.jpg

I've got to say that looks really good... I really dont like the looks of the stock FJ, but this one? -- PIMPALICIOUS! :headbang:

[02tacotim]

Dubs are 20s and above. Those are 17s.

Sorry for not being black enough to know what dubs are. Whatever they are dubs and the wheels on that truck are fucking gay.

Tim

[treknwil]

that shits gotta b anoying as hell on the trail!
Theres an on/off switch for the backup sensors!

[Brain]

I remember the first prototypes of the rear FJ bumpers being really tall on the sides. Then the other day I was behind an FJ and saw that you don't need to build it up that tall and can make a bumper for it just like any other truck (aka not freakishly tall on the sides). Glad to see Chuck and AJ were able to work something out that looks awesome!

[TEJASYOTA]

WOW! Great look guys!

[snowchucker]

FJ owners will have to do some chopping to make the rear bumper work w/ the plastic sides.
The four bolts in the middle are part of the stock mounting for the rear bumper.

[whothehellisthisguy]

I must say, that's a great way to dress up an ugly vehicle. It looks way better than I expected.

[cedarbarn]

The build up looks really good.

[thebeast8888]

Theres an on/off switch for the backup sensors!
thats freakin tight!!!!!!!!!!!!! so sick

[firemantodd]

Excelent job. The lines are perfect.

Only suggestion, Powder the rear steps black. :2cents:

[cb77DEMELLO]

Looks good guys!

Can you tell me what size tires are on that yellow one?

[CronusTRD]

295/70/17's...

[cb77DEMELLO]

295/70/17's...

Thanks who makes those?

[tacomausmc]

Thanks who makes those?
Looks like Toyo Open Country M/Ts

[cb77DEMELLO]

Looks like Toyo Open Country M/Ts

Thats what I thought. I also just found the post with the size duhhh

[trd2001]

I like that bumper. I want to do something similar to my 4runner one day.

[Jade]

That guy is going to hate those flip-down steps the first time one is left down and he peels off a kneecap....

[TEJASYOTA]

That guy is going to hate those flip-down steps the first time one is left down and he peels off a kneecap....
May be a fix for that would be using a cut out on the sides of the bumper, similar to the x-terra's (the new ones). Hummm....