Wheel stud?

[Hutch98]

Replacing the old rotors with new ones on my D44. Do the wheel studs have to be pressed in or use a BFH to pound them into place? Thanks for the info

Hutch

[Mike]

Replacing the old rotors with new ones on my D44. Do the wheel studs have to be pressed in or use a BFH to pound them into place? Thanks for the info

Hutch
Well, either will work, one gracefully and the other not so gracefully. :D

Just make sure to use a stack of washers and a lug nut to get the studs seated all the way in the rotors after you beat the crap out of them with a BFH.

Later,
....Mike

[grillmasterp]

Replacing the old rotors with new ones on my D44. Do the wheel studs have to be pressed in or use a BFH to pound them into place? Thanks for the info

Hutch

Use an open ended nut (with the washers) to "pull" the stud through