96 v6 4x4 parts truck

[swank501]

I found this guy who is parting out a 96 v6 4x4. I talked to him tonight and basically the front end is f'd up. He has sold the the motor but it sounds like there are other good parts left for grabs. I told him there may be several people here interested in parts. The only catch is the guy who bought the motor said he wanted the truck too but only paid for the motor.Fortunately this guy hasn't been in touch for two months If I can convince this guy he is better off parting this thing out, he'll go for it. I'm only interested in the driveshaft and possibly a rear axle shaft. It has a good 5sp and manual hubs so I fig that might be worth it to someone here. I am supposed to wait for his call tomorrow to let me know if he will part it out. Is anyone else interested in anything?

[Interex]

I tried talking to this guy a couple of weeks ago. Seemed pretty set on letting the original buyer take the truck and wanted to wait on him. Guess he may change his mind.

[99FlowedTaco]

TRD rearend ?

[TacoManny98]

what color interior ??? I need some interior parts also bucket seats ??

[Spacecwboy]

get ahold of the buyer of the engine and see if he will let you have it! make him think it will cost a rediculous amount to get rid of the body/truck. then we can part it out and get rich

[Cmartinez95]

If he still has the intake air box I am interested.

[ROCKWIESER]

I found this guy who is parting out a 96 v6 4x4. I talked to him tonight and basically the front end is f'd up. He has sold the the motor but it sounds like there are other good parts left for grabs. I told him there may be several people here interested in parts. The only catch is the guy who bought the motor said he wanted the truck too but only paid for the motor.Fortunately this guy hasn't been in touch for two months If I can convince this guy he is better off parting this thing out, he'll go for it. I'm only interested in the driveshaft and possibly a rear axle shaft. It has a good 5sp and manual hubs so I fig that might be worth it to someone here. I am supposed to wait for his call tomorrow to let me know if he will part it out. Is anyone else interested in anything?
I want first dibs on the manuel hub set up. spindals, hubs ect....
thanks !!


Adam

[redtaco4]

I'm Intrested in the rear third

[Ricks72]

I needf some plastic interior parts and the t-case if he has it.....if hes willing to deal pm me his number

[speedemon55]

I needf some plastic interior parts and the t-case if he has it.....if hes willing to deal pm me his number
you gonna turn the short bus into a crawler?

[Ricks72]

Nah I got a taco buggy chassi for that ;) I bought a cheap taco that needs some work that i'm turning into my DD. If I knew how to post pics I would post some of the buggy

[Kruso]

Its a 96 6cyl manual tranny that's damaged in the front. The person who's selling it doesnt really know what's going on with the truck. I've spoken with him several times. The person who baught the engine claimed almost two months ago that he was going to purchase the whole truck but has not been heard from since. Person selling the truck, Matt, is a very fickle guy, I would'nt trust a whole lot that comes out of him untill you have the item in your possession.

[LAW]

Its a 96 6cyl manual tranny that's damaged in the front. The person who's selling it doesnt really know what's going on with the truck. I've spoken with him several times. The person who baught the engine claimed almost two months ago that he was going to purchase the whole truck but has not been heard from since. Person selling the truck, Matt, is a very fickle guy, I would'nt trust a whole lot that comes out of him untill you have the item in your possession.
he said he is going to drop it off up here this weekend.. then the fun begins :saw:

[ROCKWIESER]

he said he is going to drop it off up here this weekend.. then the fun begins :saw:
So how does it work? is it first come firt surve or do we still get our dibs. :D

[LAW]

we will see :D
id like to get someone into a 4x4 conversion if all possible

[ROCKWIESER]

we will see :D
id like to get someone into a 4x4 conversion if all possible
well they can have the 4x4 conversion(front Dif) but I want the manuel hub and I'll sale them my ADD for cheap.

[LAW]

well they can have the 4x4 conversion(front Dif) but I want the manuel hub and I'll sale them my ADD for cheap.
ill let ya know man, i cant make that decision based on only my :2cents: , steve is halfway in on this :D

[nastynate]

if for whatever reason mud doesn't want the front end, i'll take the hubs and CVs.

that is of course unless it goes towards someone's 4x4 conv.

[Liltoy]

If he still has the intake air box I am interested.

I think I got a 3.0 (3VZE) airbox in my attic at home. Granted I won't be home for a couple months but if you remind me in October I'll look.

[LAW]

If he still has the intake air box I am interested.
from what i recall the airbox was smashed..

[99FlowedTaco]

i want the lower ball joints man get back to me !! $20-30 and I'll come pull em

[99FlowedTaco]

so , if i buy the cab who's gonna help do this :D
http://www.ttora.com/forum/showthread.php?t=15086&page=1&pp=30

[Spacecwboy]

looks like a lot of work to me. I think I am going to be busy that weekend

[Swamper]

intrested in the rear axle

[LAW]

intrested in the rear axle
all i have is the housing, and the driver axlefhaft

[99FlowedTaco]

intrested in the rear axle
I have a complete rearend

well its not assembled but it can be easily ! lol

where u live ?

[LAW]

I have a complete rearend

well its not assembled but it can be easily ! lol

where u live ?
go find your own thread :flipoff1:

:D

[99FlowedTaco]

go find your own thread :flipoff1:

:D
yes im a thread stealing whore.. your thread and parts truck is dead man its all sitting in its own bed ! ahaha you :saw: :saw: the fuck outta it.

[Captain J]

still got any parts?

[LAW]

still got any parts?
name your part? too many to list

[99FlowedTaco]

jeff wants that extended a/c line off the truck

[gumbo]

looking for a drivers side bucket seat in good condition and cheap... :p
gray in color.

LMK Thanks,

Jacque

[LAW]

looking for a drivers side bucket seat in good condition and cheap... :p
gray in color.

LMK Thanks,

Jacque
seats are gone, they were rained on and moldy

[Captain J]

jeff wants that extended a/c line off the truck

no, just the stock one, so I can make an extended line out of it.

[LAW]

no, just the stock one, so I can make an extended line out of it.
this one is already extended, ill trade ya straight up

[Captain J]

ok, that sounds really good. I'll take it

[99FlowedTaco]

still got the gauge cluster lindsay ? if so i want it for spare

[LAW]

still got the gauge cluster lindsay ? if so i want it for spare
it wont work with your truck, its gone already anyway

[Captain J]

Lindsey, are you free tomorrow?
wanna meet up to exchange the stuff we have allready taked about?
call me
832-221-6277
I am pretty much all day tomorrow, though I will be going to Church in the morning.

[LAW]

Lindsey, are you free tomorrow?
wanna meet up to exchange the stuff we have allready taked about?
call me
832-221-6277
I am pretty much all day tomorrow, though I will be going to Church in the morning.
i will be at work tomorrow, but i can bring the a/c line with me
give me a call in the morning

[swank501]

still got the gauge cluster lindsay ? if so i want it for spare
why do you want a spare cluster? I have one for a 99, I am just curious why you want one.

[99FlowedTaco]

why do you want a spare cluster? I have one for a 99, I am just curious why you want one.


i burned a tracer off the back of my cluster now.. i soldered a wire in place of the burnt tracer but no clue how long it will last