Buying Black 15x10 ?

[Evan9r]

Where is everyone buying their black 15x10 steel wheels with less and 4 inch backspacing.....preferably 3 5/8 or 3 3/4.....? online? mag? thanks...the cheaper the better!

[d0wnf0rcec0ncepts]

http://www.wheelersoffroad.com/toywheels.htm

[98 Taco]

be careful, the new ones I just bought had a clearance issue with the stamping of the circlular inner holes(round)
They were stamped or punched and the inside had t be ground down and my brake calipers, too
15x10 Rockcrawlers 3.75" BS

[Evan9r]

Hmm..that worries me...Has anyone else bought them from somewhere else?

that link only sells 8 inch rims not 10

[Evan9r]

Bump...can anyone help me? I cant seem to find a 15x10 black steel wheel with less than 4 inches of backspacing...what gives?

[tacoman13]

Allied makes some balck steel wheels. i dont know what sizes but these are them:
http://www.ok4wd.com/catalog.asp?cat=46

[Evan9r]

i think those are the same as the Rock Crawler Xtreme type 51 wheels..i just called NT&W and they said they dont fit a tacoma, have to grind the caliper or something...

[tacoman13]

i had a set of the 15x8 steel daytona's on my '99 and they fit fine. the 15x10's should have the same bore in the back so they should fit.

National also told me that Weld rims do not fit on tacomas either, which is not true.

[Evan9r]

They just said they kept getting those rims shipped back because they didnt fit so they said not to sell them for tacomas anymore. I cant find anything that is less than 4" backspacing that is a 15x10 for a tacoma that fits. And those daytonas dont come in less than 4" either..I called tyre1.com and they said they dont, at least for the 15x10 wheel.

[Evan9r]

Will these work? anyone had trouble with these not fitting a 2000 tacoma? http://www.4wheelparts.com/4wp/products/productLine.asp?cat=WHE&prodline=3204&catName=WHEELS&man=TECH

15x10 6 on 5.5, 3.75 backspacing.....

[Evan9r]

where has everyone else bought their 15x10 black steel wheels and what backspacing are you running? I cant seem to find anything less than 4" that fits our trucks...If I have to have 4" then Im thinking of going with the cragars from summit....does anyone have them?