: looking for tacoma ifs parts


gambrinus
02-13-2007, 07:54 AM
Anyone have any swap leftovers they want to get rid of? Specifcally looking for:

Knuckle / spindle assembly (doesn not have to have caliper or rotor)
Upper & lower control arms (may not need these)

Parts need to be from a 4x4 or pre-runner and are for the passenger side.

If you have anything let me know what you want for it.

thanks!
shane

TBob
02-13-2007, 08:21 AM
I've got arms for both sides - sorry just sold the pass side knuckle/spindle to wheeler Jake but I still have driver side.

Anyone have any swap leftovers they want to get rid of? Specifcally looking for:

Knuckle / spindle assembly (doesn not have to have caliper or rotor)
Upper & lower control arms (may not need these)

Parts need to be from a 4x4 or pre-runner and are for the passenger side.

If you have anything let me know what you want for it.

thanks!
shane

padesertboy
02-13-2007, 08:41 AM
I have `87 runner ifs leftovers......and that freakin housing you wanted, that I waited around for....

Kaistie
02-13-2007, 08:52 AM
I think I have everything from my swap. I will check and see. It is all from a 2000 V6.

FAUX X 4
02-13-2007, 08:56 AM
I've got arms for both sides - sorry just sold the pass side knuckle/spindle to wheeler Jake but I still have driver side.

:confused:

grozanc
02-13-2007, 09:27 AM
I also have upper control arms attached to the spindals and hubs (still has the cv's in them as well). It's off a 2001 (ADD).

RadRyan(Fabwerx)
02-13-2007, 05:20 PM
Igot everything except upper control arms. come buy and check it out.

bentyota
02-13-2007, 06:13 PM
i have everything literaly and then some more
i even have some manual hubs complete still bolted to the front end lol

gambrinus
02-13-2007, 07:49 PM
thanks for all the offers!

I will know more in the next couple of days just what parts we will need. We may get lucky and only need a set of upper / lower ball joints. Just got to get it rolling on all fours.

Ryan, since you are the closest to me looks like you are the winner! Josh, definately a close second.

let the cannibalizing begin....
http://cm.ebay.com/cm/ck/1065-29392-2357-0?uid=91875571&site=0&ver=EOIBSA080805&lk=URL&Item=190079083819

azredtaco
02-13-2007, 09:12 PM
thanks for all the offers!

I will know more in the next couple of days just what parts we will need. We may get lucky and only need a set of upper / lower ball joints. Just got to get it rolling on all fours.

Ryan, since you are the closest to me looks like you are the winner! Josh, definately a close second.

let the cannibalizing begin....
http://cm.ebay.com/cm/ck/1065-29392-2357-0?uid=91875571&site=0&ver=EOIBSA080805&lk=URL&Item=190079083819
ahhh, i saw that one after it ended. Looks like a sweet deal:D

Slergio
02-18-2007, 12:16 AM
We may get lucky and only need a set of upper / lower ball joints. Just got to get it rolling on all fours.

2 brand new upper balljoints, an aftermarket brand, not Toyota OEM. $20 obo
PM me if interested.

padesertboy
02-19-2007, 12:36 PM
I have a couple of sets of AISIN hubs, and `87 ifs junk

gambrinus
02-19-2007, 01:41 PM
I have a couple of sets of AISIN hubs, and `87 ifs junk
Thanks but we've got everything we need...