my beater tacoma

[Will Revis]

beatercab:saw: :welder: :eek: :2cents: :2cents: :2cents: :D

http://i95.photobucket.com/albums/l156/flycast/subframe2.jpg

http://i95.photobucket.com/albums/l156/flycast/subframe4.jpg

http://i95.photobucket.com/albums/l156/flycast/DSC01575.jpg

http://i95.photobucket.com/albums/l156/flycast/DSC00073.jpg

http://i95.photobucket.com/albums/l156/flycast/DSC00076.jpg

http://i95.photobucket.com/albums/l156/flycast/DSC00074.jpg

http://i95.photobucket.com/albums/l156/flycast/DSC00069.jpg

[AllJumpStyle]

Looking good. Planning on racing it?

[HoeRunner]

That is a nice cage keep the pics comin.

[AZNPG]

thats a beater? keep us updated and keep the pics coming

[AK98Taco]

That's one hell of a beater cage! The gussets are beautiful!

[TimF]

Looks good!

will it have bubbles on it? to match the tow rig?

[Will Revis]

The tow rig is an 07 Tundra crew max with camburg replacement coilovers and uniball UCAs.:eek: :cool:

[Will Revis]

The superduty bubble truck went bye bye. Thanks for the comments guys. I'll post some pics when I get the front end on and start mounting stuff.

[exacto]

can you get a picture of the side, straight one, im just curious of how the double cab looks, ive haven't seen a lot of double cabs for this use, and ive wanted a double cab, if you cant, i understand, no biggie

-david

[Kirkenhiemer]

What's going on the front?

[Will Revis]

What's going on the front?

I'm probably going to get an older ESB setup for the front right now. Later I'm thinking about going with the RicherRacing tacoma kit with custom spindle or vendetta if they ever come out with a new tacoma kit.

Right now Im thinking of rebuilding the esb upper to handle either a coilover/bypass combo or widening it to stuff a 3.0 radflo in there. It has airbumps up front but I may move those to the back since all the back has is 2.5 16" 2-tube bypasses

[prerunnerguy]

Who is this? I saw this truck heading out toward Florence on a trailer about a week ago.

[Will Revis]

I bought your seat sliders Nate.

What did you end up doing for motor mounts?

Tim- didnt you build your own? Im thinking of going this route if I cant find some in the next couple months.

[TimF]

I did, I have pics in the desert folder somewhere.

Is this at your house in Florence or at Ben's house in NW phoenix?

[Will Revis]

Its at my house in florence.

[prerunnerguy]

I bought your seat sliders Nate.

What did you end up doing for motor mounts?

Tim- didnt you build your own? Im thinking of going this route if I cant find some in the next couple months.

I thought that might be you truck looks good. So far I haven’t done anything with the motor mounts I am still running the stock ones. Tim has a buddy who is suppose to be building some but I have heard no word back on them. I have talked to Tim @ DMZ and ESB Mike and both have been talking about building them but have heard no word back yet from either of those guys.

[prerunnerguy]

I'm probably going to get an older ESB setup for the front right now. Later I'm thinking about going with the RicherRacing tacoma kit with custom spindle or vendetta if they ever come out with a new tacoma kit.

Right now Im thinking of rebuilding the esb upper to handle either a coilover/bypass combo or widening it to stuff a 3.0 radflo in there. It has airbumps up front but I may move those to the back since all the back has is 2.5 16" 2-tube bypasses

Have you found the older ESB kit yet? What are you plans race or just play?

[TimF]

I'm going to get you both to race! Double Cabs races!!!!!

Jesse should have some Motor mounts soon.

[Will Revis]

yes I should have the arms in a week or two but need to order coilovers and build an engine cage. Im probably going to cut off the core support right away because the current one has mucho cracks in it.

Let me see some pics if your friend makes the mounts.

[TimF]

Will do.

Do you have your stock CV's?


Did you ever sell your Burg LT kit?

[prerunnerguy]

yes I should have the arms in a week or two but need to order coilovers and build an engine cage. Im probably going to cut off the core support right away because the current one has mucho cracks in it.

Let me see some pics if your friend makes the mounts.

I have heard that BMS is comming out with a Tacoma kit that has uppers, lowers and spindles but I am not sure if that is true or not. You should check that one out.

[OOwballer]

yes I should have the arms in a week or two but need to order coilovers and build an engine cage. Im probably going to cut off the core support right away because the current one has mucho cracks in it.

Let me see some pics if your friend makes the mounts.


if you're deal falls through on those i have the original set of esb arms and gusseted stock spindlesthat i'm 99% sure im gonna sell

[Will Revis]

alright thanks. I know BMS had a kit at one time or maybe it was just a one-off custom deal. I do still need to sell the camburg kit with the tundra axles. Let me know if you know of anyone who needs it.

[TimF]

alright thanks. I know BMS had a kit at one time or maybe it was just a one-off custom deal. I do still need to sell the camburg kit with the tundra axles. Let me know if you know of anyone who needs it.

I don't need it but I WANT it.

Sadly I don't have the cash for it.

I hear the Burg is going to have a race kit for our trucks. 5 over with custom spindle.

[Will Revis]

Yeah but think about how much$$$ that will cost. This setup is a steal with the coilovers included. With an engine brace you'd be passing diesel with his normally aspirated tacoma!

[prerunnerguy]

Yeah but think about how much$$$ that will cost. This setup is a steal with the coilovers included. With an engine brace you'd be passing diesel with his normally aspirated tacoma!

Do it Tim I want to see a truck with a pretty much stock rear set up and a bolt on Burg kit pass me....or try...

[Will Revis]

DOnt listen to him Tim. He's just a naysayer.:D

[TimF]

Fuck you both!!

I will do it with my bolt on burg coilover and UCA! Oh but i got deavers in the rear!

WAJ!!!

[Tweeter]

alright thanks. I know BMS had a kit at one time or maybe it was just a one-off custom deal. I do still need to sell the camburg kit with the tundra axles. Let me know if you know of anyone who needs it.

It was a prototype kit. It got sold, think it's in AZ somewhere...bitchin kit for sure.

[prerunnerguy]

Fuck you both!!

I will do it with my bolt on burg coilover and UCA! Oh but i got deavers in the rear!

WAJ!!!


Well hell with those deavers you will be nerfing TT's I will be left way in the tail lights... I will hook up with you this weekend I have some paperwork for you to fill out..

[TimF]

You know it!

Kartman passed BJ Baldwin Video (http://www.youtube.com/watch?v=w8PMym5oBOA) at the 1000 last year. He was going to nerf him but he didn't know how Bj would take it. He talked to him later about it and Bj said he would have laughed if he got nerfed by a spectaor!


Sweet give me a call.

[toycoma732]

updates..?

[TimF]

It's still in his garage....

[toycoma732]

It's still in his garage....

good to know

[Will Revis]

I just cut off the fender well and picked up the old skool esb goodies. (If that counts) Heres a pic...

http://i95.photobucket.com/albums/l156/flycast/DSC00088.jpg


...

http://i95.photobucket.com/albums/l156/flycast/DSC00087.jpg

[Will Revis]

The rear glass is gonna have to kick out since the rear end is wider. I dont have the $ to modify the glass right now.

http://i95.photobucket.com/albums/l156/flycast/DSC00107.jpg

Kinda goes hand and hand with the wierdo body lines of the cab anyway I think...

http://i95.photobucket.com/albums/l156/flycast/DSC00108.jpg

http://i95.photobucket.com/albums/l156/flycast/DSC00106.jpg

http://i95.photobucket.com/albums/l156/flycast/DSC00107.jpg

http://i95.photobucket.com/albums/l156/flycast/DSC00104.jpg

[AZNPG]

nice pics man are you gonna run the stock motor mounts for now

[Will Revis]

No thats somewhere down the list also before I drive it again. I'll probably try my hand at making some though. If not that, Richer Racing is looking for a donor truck for a couple days to make some to start selling. If you live near there you should give Jonny a call and see if he still needs a truck. Might get a killer deal...