ARB end cap modification

[YukonKerry]

Can someone tell me where this link might be, I'm getting ready to put an arb bull bar and warn xd9000 on my 4runner and I cant find this mod.

Thanks! Kerry

[hytenor]

Can someone tell me where this link might be, I'm getting ready to put an arb bull bar and warn xd9000 on my 4runner and I cant find this mod.

Thanks! Kerry

http://www.wattora.com/mods/endcap/
their site seems to be down at the moment, however.

[AK98Taco]

That's what we did to my frame ends to make my bumper suck in close to the grille.

The frame horns were cut about an inch and-a-half behind where the bolt-on ones end. Then a sleeve was placed inside the frame so that a through bolt could be used in place of the captive nut.

Finally, a plate with a grade-8 captive nut was welded onto the end of the frame. It looks really slick.

In this picture, http://printcraftpress.com/v-web/gallery/tacoma-front-bumpers/toms_side_view, you can see how much shorter the frame is.

[Ted]

That's what we did to my frame ends to make my bumper suck in close to the grille.

The frame horns were cut about an inch and-a-half behind where the bolt-on ones end. Then a sleeve was placed inside the frame so that a through bolt could be used in place of the captive nut.

Finally, a plate with a grade-8 captive nut was welded onto the end of the frame. It looks really slick.

In this picture, http://printcraftpress.com/v-web/gallery/tacoma-front-bumpers/toms_side_view, you can see how much shorter the frame is.


Your truck is really looking good. Lots of changes since Moab.

[WATRD]

http://www.wattora.com/mods/endcap/
their site seems to be down at the moment, however.

It's back. We got caught in the fallout of a Denial of Service attack, but all should be well now.