bunch o parts

[colsoncj]

I have a huge stockpile of parts that all need to go....

Most of it is 84-88 stuff, but some 79-82.

Grilles, Trannys, T-cases, engine block, driveshafts, 22RE sensors, 22RE intakes, exhaust parts, solid front axle housings and some parts, rear axles, some gear sets, almost a complete blue interior for a 84-88 pickup, some glass, some doors, a couple fenders, a brand new long bed bedside for a 84-88, random underhood stuff, cross members, some swithes, instrument clusters (no tachs for 84-88, dunno bout the 79-83), and the list goes on. all reasonable offers are accepted.

Now the downside... I'm in Monett, MO, but can deliver to any upcoming wheelin trip if I'm going free of charge! Also, some of these parts are in Ft. Smith as well!

Shoot me an email, or post up and I'll see if I cant help!

[andrewmch]

Hey im lookin for a few parts..... I need a right rear tailight housing....one of the topper glass the curved one on the right rear. I have an extra left rear but i was at work one day and a guy with a weed eater broke the right one out.....go figure the one i dont have lol.... O and u said gear sets??? I need a ring and pinion set up for a rear end i got.... the gears pinion gears are trash in the one i got....

[colsoncj]

The taillight housing I doubt I have, that seems to be the one I always break, and I think I used the last one.

That glass I know I dont have, and bummer about the weed eater.

The gear set I may have, what ratio?

[YotaJosh]

You mention some rear axles. What year are they, and what condition? I'm looking for a complete drum-to-drum IFS rear axle. If you don't have any of those, a 79-85 rear would be fine.

I'm looking to upgrade to the wider axle, or rebuild the one I have (stock '79). My axle shaft splines are sharp and sloppy, and my carrier is pretty much toast.

Is the stuff in Ft. Smith at someone else's place, named Mike perhaps?

[colsoncj]

You mention some rear axles. What year are they, and what condition? I'm looking for a complete drum-to-drum IFS rear axle. If you don't have any of those, a 79-85 rear would be fine.

I'm looking to upgrade to the wider axle, or rebuild the one I have (stock '79). My axle shaft splines are sharp and sloppy, and my carrier is pretty much toast.

Is the stuff in Ft. Smith at someone else's place, named Mike perhaps?


Last I checked I had a complete drum to drum IFS rear and 2 drum to drum SA rears, but all 3 w/o 3rds. Condition is unknown, but would assume typical junkyard find. I'd like 60 for the IFS and 40 for the SA, OBO.

Nope, Mike doesnt have these parts... but I know who you're talking about. Also need to update, all the parts that were in Ft. Smith are now in Central New York. All thats left of the stash is at my house.

[colsoncj]

Also, if you needed a 3rd or just a carrier, I probably have one. What ratio?

[ArkieTaco]

Hey if you got any carrier bearings around in good shape I'm interested. Its for a long wheel base 85 pickup. Door panels for that year? Do you have power windows on any of those?

[YotaJosh]

Last I checked I had a complete drum to drum IFS rear and 2 drum to drum SA rears, but all 3 w/o 3rds. Condition is unknown, but would assume typical junkyard find. I'd like 60 for the IFS and 40 for the SA, OBO.

So the axles, drums, brake backing plates, etc. are there, just not the thirds? Is this located in MO?

Also, if you needed a 3rd or just a carrier, I probably have one. What ratio?

At the least, I need a 4cyl carrier and housing. My axle had the early 4.37 gears, so if you have a 3rd in that ratio ready to go, I'd like to take if off your hands, and maybe that IFS housing.

Thanks.

[colsoncj]

Hey if you got any carrier bearings around in good shape I'm interested. Its for a long wheel base 85 pickup. Door panels for that year? Do you have power windows on any of those?

I know I have some carrier bearings, dunno bout the shape (I'm assuming for the multi-piece rear driveshafts....)

I do have some doors, and door panels. None have power windows though.

[colsoncj]

So the axles, drums, brake backing plates, etc. are there, just not the thirds? Is this located in MO?



At the least, I need a 4cyl carrier and housing. My axle had the early 4.37 gears, so if you have a 3rd in that ratio ready to go, I'd like to take if off your hands, and maybe that IFS housing.

Thanks.

Yup, everything but the 3rds.... Yup, located in MO - mapquest 65708

I got a 4cyl 3rd... dunno bout the ratio... IIRC I dont have any of the real early stuff like that in ratios. If I could ever find my inventory list I made Id know...... where did that thing go. :confused:

[andrewmch]

Im not for sure what ratio i need??? What u got? im just looking to put it in my spare axle that i got so i can weld the spiders together and have a fully locked axle and still keep my good open diff axle for spare..... Whats the consensus for 33's or 35's as far as ratio??? I have heard that 529's are good?? no?? Stock would be fine i think mine is 437's???

[colsoncj]

Im not for sure what ratio i need??? What u got? im just looking to put it in my spare axle that i got so i can weld the spiders together and have a fully locked axle and still keep my good open diff axle for spare..... Whats the consensus for 33's or 35's as far as ratio??? I have heard that 529's are good?? no?? Stock would be fine i think mine is 437's???

I honestly couldnt tell ya what I got, Id have to go look. Whatever you use in the back, remember you must use the same in the front.

What year is your truck? What engine, what transmission, and what original tire size?

[andrewmch]

86 toy 4runner 22re motor not sure about tranny and 15x7 wheels originally..... where? how could i check ratios for stock n stuff is there a chart or something out there???

[YotaJosh]

86 toy 4runner 22re motor not sure about tranny and 15x7 wheels originally..... where? how could i check ratios for stock n stuff is there a chart or something out there???

There's a chart on the Pirate 4x4 FAQ: http://pirate4x4.com/forum/showthread.php?t=459180

Find you axle code on the VIN plate under the hood, and look it up.

If you still can't figure it out, jack it up and count :D

[79coyotefrg]

86 4runner, is it a 5 speed or auto, stick is a G292 code - 4.10

cant remember the code for the auto but its a 4.30

btw 79's had the G102 code and are 4.37

[colsoncj]

I'm leaving for vacation tomorrow, so I wont be on here to check up. When I get back, I'll try and sort out what ratios I do have.

[andrewmch]

its a 5 speed.... I love manuals.... so much fun to drive.... if only i had more horsepower so i could bang the gears like the other imports lol..... so i guess i got 4:10's???

[colsoncj]

I'd say its probably 4.10s