Motor Mounts...help!!

[GreenTaco]

I need a set of motor mounts for Tacoma. My stock ones are completely destroyed and I need to get a new set ASAP. Who makes motor mounts for the 3.4 V6 that bolt to the stock perches? Thanks

Brian

[AZNPG]

hit up Vandetta Motorsports they have motor mounts for the 3.4 v6

[ginobetterfly]

Vendetta... (just in case)

[GreenTaco]

I need motor mounts by next weekend, if Vendetta is busy can you think of anyone else?

(someone on another forum said Vendetta was super busy)

[AZNPG]

Vendetta... (just in case)

oops my bad haha.

they're only working on one truck that they need to get out of the shop

[BajaRnnr]

I need motor mounts by next weekend, if Vendetta is busy can you think of anyone else?

(someone on another forum said Vendetta was super busy)

Inland Trucks
www.inlandtrucks.com
26500 Jefferson Ave, Suite A
Murrieta, CA 92562
(951) 461-4412

Try this place they specialize in Toyota vehicles they would have the motor mounts you need, or you can try the local Toyota dealer. Hope this helps, good luck.

[BajaRnnr]

You can also try Pro Trux

www.protrux.net
1620 Grand Ave, Suite 4
San Marcos, Ca 92069

Genuine Toyota Parts, and Friendly Customer Service is available:

Mon. - Fri.: 8am to 5pm
Saturday: By appointment only

Tel: (760) 761-0170

[AZNPG]

last time i heard from esbmike now vendettamike said he has acouple sets of motor mounts available

[GreenTaco]

do you have an e-mail, pm address, or contact info for him? I've e-mailed people at the vendetta e-mail address and got no response. Thanks

Brian

[prerunnerguy]

Try DMZ Fab.

[GreenTaco]

I tried DMZ, Tim said it would be about 2 to 3 months.

[marnes2986]

whats the status brian?

[drabnor]

seriously buy a set of stock ones and have them plated up, ANY fab shop worth a shit thats not backlogged can do it for you prety easily, hell the guy that did mine did it in his garage :2cents:

[GreenTaco]

I'm talking to a guy in Bakersfield at Nellos Fab about a set. I don't think I'll be doing it this weekend like I hoped, but I think next weekend I should be up and running. I'll be posting pics once I get started.

[marnes2986]

soo what was the outcome Brian????? Pictures???? new reinforced set or just stock....

[GreenTaco]

I ran out of time before my Mojave Trail trip to get (or fab) a new set of stronger motor mounts so I went with another set of stock ones. As for the engine perches I completely destroyed my drivers side so it had to be cut off, my passenger side looked okay. I got a set of stock perches and had a friend fully weld them, then weld on a gusset to box the engine perch, and lastly weld it on the truck. It came out really good and I'm happy, plus they are stronger. I still need to cut of the passenger side and weld up the new one, but for now it's fine. I will most likely do that in the summer and get (or fab) better motor mounts. It lasted through the Mojave trail and I pounded the truck pretty good out there.

Mark when are we going to go off roading? I think in a week or two we might go to Ocotillo. Leave on a Friday night and come back Saturday night. We are also going to Pismo in mid August.

[GreenTaco]

Here are I few people I delt with

DesertTRD - doesn't make them anymore.

DMZ - Wants to make them, but needs a truck for mock-up and will take some time.

Vendetta - Never answerd e-mails, myspace messages, PM's, or even phone calls. I know they are new, but I thought they would be better than that

Nellos Fab - he makes them, has a jig and only takes a few days (if they are not busy). seemed cool, a little exspensive.