ballistic fab t-case parking brake

[chris85053]

hey have any one put on one of these t-case parking brake from ballistic fab? do you have to cut the cable shorter or anything?

[Kaistie]

I didn't have to cut mine. Should just blot right up...

[TBob]

crawler or no crawler when you did it Nate? Mine worked fine but I have a crawler - I'm not so sure it's ok w/o. I saw some guys use the stock pivot that were w/o crawlers, seem to work good and give better leverage.

[Kaistie]

With a crawler you have to extend the line. It won't reach with the box, or at least not mine. I just held it up there and saw that it was way short and put it back on the shelf. It has sat there ever since.

[TBob]

mine worked perfect with the crawler ....I think you need to look again.
you are a 5sp right?>

With a crawler you have to extend the line. It won't reach with the box, or at least not mine. I just held it up there and saw that it was way short and put it back on the shelf. It has sat there ever since.

[TBob]

some reading -
http://www.tacomaterritory.com/forum/showthread.php?t=43900&highlight=pinion+ebrake
search the main board for more.
Once I installed the solid rotor things worked fine - still makes noise but works