PDA

View Full Version : Seats from '03 4Runner into '98 Taco

Duplexx
04-02-2008, 06:03 PM
I just got some leather buckets out of an '03 Runner, and am going to put them into a '98 Taco. Is there anything I need to know about hooking up the electrical? Install fuses that are not in my truck. It is a standard cab with bench, but I noticed that there are electrical connections under the seat. Any help would be helpful. Thanks!


Eric
Avsfreak1234
04-02-2008, 07:01 PM
the only electrical connecters under my bench in my reg cab 98 taco are for the seatbelt sensors...and the ones I put there for my amp. shouldnt be that difficult to match the new ones.
gr8goose82
04-03-2008, 12:50 AM
that's all that's under my 01 ext cab seat too, i just disconnected it anyway cause the light and buzzer is kind of anoying
Blowntaco
04-03-2008, 10:53 AM
Are your leather seats power?
RedRunnertc
04-03-2008, 01:03 PM
Didn't DriftinCO just put power seats in his formely bench Taco?
Blowntaco
04-03-2008, 01:27 PM
Nope I did
Taco_Man
04-03-2008, 01:56 PM
Didn't DriftinCO just put power seats in his formely bench Taco?

Nope I did

:worthless
Blowntaco
04-03-2008, 02:08 PM
:worthless

We did post pics when this was done, under cheap mods" 4runner seats in Tacoma":neener:
Duplexx
04-03-2008, 03:52 PM
The leathers do have electric to them, and my only question is how many holes am I going to have to drill??
RedRunnertc
04-03-2008, 05:14 PM
We did post pics when this was done, under cheap mods" 4runner seats in Tacoma":neener:

x2 - that was the point ... (even if I was retarded about who posted it)
Blowntaco
04-03-2008, 05:16 PM
The leathers do have electric to them, and my only question is how many holes am I going to have to drill??

To be honest I wouldn't be able to tell you as the '03 runner seats are completely different than the '99 runner seats that I have. Are you sure that they will even work as those seats are bigger and wider?
Blowntaco
04-03-2008, 05:20 PM
x2 - that was the point ... (even if I was retarded about who posted it)

??????
ike
04-03-2008, 05:34 PM
he will definately have to drill 4 holes, two for each seat. Maybe even 3 per seat depending on how the brackets line up.
Blowntaco
04-03-2008, 07:41 PM
Here are the seats that are now in my Taco

http://im1.shutterfly.com/procserv/47b8da22b3127cceb7be7923744e00000026100QZOGTRmxYsR
http://im1.shutterfly.com/procserv/47b8da22b3127cceb7be7920f57d00000026100QZOGTRmxYsR
http://im1.shutterfly.com/procserv/47b8da22b3127cceb7be7921744c00000026100QZOGTRmxYsR