: Gearing Question


cchukan
05-09-2005, 09:39 PM
HI!!
yes i am a newbiee...
i've been reading on some suspension and tires..
and i keep seeing the word gearing and regearing blahblahblah..
and there seems to be no definition for gearing???
what is gearing? :confused:

Mike
05-09-2005, 09:52 PM
HI!!
yes i am a newbiee...
i've been reading on some suspension and tires..
and i keep seeing the word gearing and regearing blahblahblah..
and there seems to be no definition for gearing???
what is gearing? :confused:

The gears everyone is talking about are in your differentials. The differentials transfer power from your drivelines to your axles.

There are several gear ratios available for our trucks, one common ratio is 4.10:1. This means that for every 4.1 revolutions of the driveshaft the axles will turn once.

High gearing is actually numerically lower. Say you have 3.91 gears, your driveshaft will turn 3.91 times for each revolution of the axles, so you go faster at a lower RPM.

For most people, lower gearing is desireable. I am running 4.88:1 gears, meaning the driveshaft turns faster to make the tires go slower, and that's helpful for four-wheeling.

Later,
....Mike

Mike
05-09-2005, 09:54 PM
HI!!
yes i am a newbiee...
i've been reading on some suspension and tires..
and i keep seeing the word gearing and regearing blahblahblah..
and there seems to be no definition for gearing???
what is gearing? :confused:

We have a really cool tech section that has been developing over the last couple weeks.

http://www.tacomaterritory.com/wiki/index.php/Special:Search?search=gear&fulltext=Search

Lots of good reading there.

Later,
....Mike

cchukan
05-10-2005, 02:59 AM
Hey thanks alot mike