I want them to be clean and Jayce said that he could make them but they wouldn't look as good as the laser cut ones. For $15 each as shown in the link above, I think it will be worth just buying them. It will save us some time.
You going be able to swing by on March 10-11 for my bumper build? That is the tentative date we have set. I am abuot 90% sure I will be able to make it down that weekend.
But If you make your own you can make them look as good as you want it just depends on the time you spend on them. But yeah 15 bucks is not bad almost worth the time you would spend making them.
You going be able to swing by on March 10-11 for my bumper build? That is the tentative date we have set. I am abuot 90% sure I will be able to make it down that weekend.
I want them to be clean and Jayce said that he could make them but they wouldn't look as good as the laser cut ones. For $15 each as shown in the link above, I think it will be worth just buying them. It will save us some time.
You going be able to swing by on March 10-11 for my bumper build? That is the tentative date we have set. I am abuot 90% sure I will be able to make it down that weekend.
I have some. I build bumpers and I have some that look exactly like the ones in the pic. 1 inch thick with a 7/8 hole for a 3/4" shackle. They are cnc machined and the back side is already beveled for welding. if you are still in the market, they are $15 each...
Anthony Padgett
136 Lyttleton Lane
Madison heights VA 24572
I have a large quantity. if you know anyone who needs more, send them my way.
Made my own... cost about $5 for materials plus about an hour worth of work... If you’re going to buy them, get the ones that are long enough to go all the way through the bumper and weld both sides...
You can always make some. All it takes is a big fucking drill, a belt sander and some patience. Maybe saw the corners off first before you go at it with the belt sander.
What's the torch for? The steel is $5, and you can get the drill bit for about $20 and have the metal yard cut it to the length for you want for about a buck
There are some on ebay as well. The ones that go all the way through 2" box sell for $18 plus like $8 for shipping. I'm looking for some that will go all the way through 3" box though, so they need to be atleast 5" long.
i don't think that passing the mounts trough the bumper is such necessary. Flux Core welding got 70 000kg/cm3 of resistance depending on your wire. Just apply a good 3pass welding all around the mounts and forget about bend them...
i don't think that passing the mounts trough the bumper is such necessary. Flux Core welding got 70 000kg/cm3 of resistance depending on your wire. Just apply a good 3pass welding all around the mounts and forget about bend them...
Its not the wire you are welding with ness. but more the material you are welding to.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
TTORA Forum
2.4M posts
75.5K members
Since 2004
TTORA forum is the best Toyota off-road club around. We are nation wide with chapters in most states. Come in and discuss Tacoma, 4Runner, Highlander, & TRD models.