best thing you scored for under $100? - Page 13

yotaneck13 · 05-29-2011, 07:46 AM

got a set of 15x8 mags with 75% 33" boggers for 80 bucks at a swap meet once

a set of 5 points for the crawler for 25 shipped

student's tundra · 05-29-2011, 11:21 PM

Bought a bed extender for my 1st gen tundra for $40 and spent another $15.95 on the quick release latches so total invested was $55.95

ainokea · 05-30-2011, 10:08 AM

As much as I didn't want to put them on, I scored a brand new set of polished stainless nerf bars for my Tundra to help my VERY pregnant wife get in and out of the truck for 80 clams.... She would not be able to ride in it without them.

SCRunner12 · 05-30-2011, 10:13 AM

Quote:

Originally Posted by ainokea

As much as I didn't want to put them on, I scored a brand new set of polished stainless nerf bars for my Tundra to help my VERY pregnant wife get in and out of the truck for 80 clams.... She would not be able to ride in it without them.

I know exactly how you feel. I had to keep my running boards on my 95 while my girlfriend was pregnant (she is also 5'1") and now I have to keep them on my 2000 because she has to get the baby in and out. Luckily I just scored some 67" Trail Gear sliders for $100 that will be going on in the place of the running boards.

Elton · 05-31-2011, 11:20 PM

two 14'' magnaflow mufflers for 45 shipped one was the polished one that is 99 shipped alone amazon warehouse deals ftw !

haddix · 09-18-2011, 12:50 PM

Warn MX8000 Free!

Plan to clean it up and mount it on my dbl cab.

Batyc1 · 09-19-2011, 06:46 PM

Got a 85 Waggy Dana 44 front with a set of flat top knuckles for a 30 pack of Natty last week!

killzone90 · 11-11-2011, 10:51 AM

Got a bikini top kit for my 87 4runner of Craigslist for 40

Topper for my 96 taco 50 bucks Craigslist

I also bought front spacers
40 off somone on here and rear toytech 2 inchlift shackles off somone from here for 60.so my whole lift was 100 bucks

Sent from my LG-P509 using Tapatalk

tennessee01tacoma · 01-30-2012, 11:01 AM

Got a yakima mega load warrior off craigslist for 80 bucks like new with the fairing

dcpsychobilly · 01-30-2012, 06:40 PM

I was once picked up a ramsey accessories winch kit for five bucks brand new with gloves tree strap dring and snatch block all brand new in carry bag in original box

sdtaco · 01-31-2012, 07:18 AM

A hot little Colombian in Costa Rica.

Tacoma Jake · 01-31-2012, 09:02 PM

Quote:

Originally Posted by sdtaco

A hot little Colombian in Costa Rica.

Prove it...

sdtaco · 02-01-2012, 06:20 AM

Quote:

Originally Posted by Tacoma Jake

Prove it...

Hmmm...maybe you have not been to CR before.

Tacoma Jake · 02-01-2012, 11:55 AM

Quote:

Originally Posted by sdtaco

Hmmm...maybe you have not been to CR before.

knuckleduster271 · 03-27-2012, 07:07 PM

I picked up a 4.88 geared front clamshell with all the complete front end parts (owner sas'd his truck) for $175. I had to drive 2.5 hrs to get it but didn't bother me at all

SurfingDrunk · 03-27-2012, 07:16 PM

Quote:

Originally Posted by sdtaco

Hmmm...maybe you have not been to CR before.

Key Largo in San Jose is an interesting place.

bradleyem · 03-27-2012, 08:34 PM

Maybe not the best thing, but I just got an HP DesignJet 750C Plus plotter given to me. I spent about $20 on parts to refurbish it. It will print up to 36" wide color blueprints, so I don't have to try to read prints from 8.5 x 11 paper anymore. As a bonus it will print poster size photos in 600 x 600 resolution.

Sent from my DROID RAZR using Tapatalk

Rock_toy · 03-27-2012, 10:35 PM

A pair of used 27 spline longfields. $70 I called and they still have a life time warranty, even used.

Doc2012 · 03-31-2012, 09:43 PM

8.4 axle housing-60
chevy 63's-50
3 manual knuckles and a manual transfer case- 300, so less than 100 a piece.

Little more than 100, but also got a full set(F&R) of 4.88 with ARB air lockers, compressor, switches, harness, and accessory kit for 1975.....

BigChalupa · 04-10-2012, 12:05 AM

Got two off these bad boys for 100 bucks on Amazon. 2 12" subs 1200 watts a peice. The best thing i got latley for 100 smackaroos.

higherlux · 04-20-2012, 10:19 PM

third gen toyota 2wd, automatic with a knocking 22re........................50$

TrailBlazin' · 04-21-2012, 01:04 AM

Got myself some Hanneman Fiberglass fenders, ignore the work in progress.

TrailBlazin' · 04-21-2012, 01:08 AM

Bumper getting modified a little bit. It has a polished aluminum skidplate that goes on the front. Now I've just gotta sandblast the setup, paint it, and throw the skid back on. Threw in a picture of the grille for those wondering where it is..

Jones · 04-21-2012, 09:51 AM

Got a pair of buckets out of a civic for $60. Still working on mounting them well. They were most recently out of an '86 toyota pickup, and have the rails to match. So far I've just bolted them to 1x1 bar and that to the stock mounts, but they sit high and not real solid.

Still way better than the 60/40 bench!

knuckleduster271 · 05-12-2012, 09:24 PM

I picked up an elocker complete from drum to drum last week on cl for $230.00 non abs, 4.10. Now I just gotta find a computer, switch and harness

LIVES4CRAWLIN · 05-13-2012, 09:09 AM

You don't need the computer switch and harness for that elocker. Just saying you can spend 12.00 on a switch plus wiring and never have to worry about it . That's how mine are wired in. I can't remember the link to the write up I followed but so much easier than messing with a shit ton of relays,

My best buy under a 100$ ever was a functioning elocker third for 35 bucks

knuckleduster271 · 05-13-2012, 09:23 AM

I was looking at 12voltguy.coms harness- its about $145 I may try to wire it myself. Not real familiar with these yet and doing research.

LIVES4CRAWLIN · 05-13-2012, 10:18 AM

Here's the link I started with on doing my front an rear elockers
http://www.toyota-4runner.org/3rd-ge...er-wiring.html

LIVES4CRAWLIN · 05-13-2012, 10:21 AM

It really made it easy , limit switches are built into the actuators , and the truck I did this on had been wired up using Toyota relays , and it was a nightmare to chase gremlins since then , I haven't had a single problem with mine , I looked at the 12 volt guys kit, but I figured I'd try using the dpdt switch (I ordered mine from OTRATTW.com) one says rear locker the other days front ,

knuckleduster271 · 05-14-2012, 07:41 PM

So how much did you end up having in it? Just curious as to what I'd have in just parts vs something that's plug and play.

05-29-2011, 07:46 AM	#361
yotaneck13 Senior Member Join Date: Mar 2011 Location: KNOX, PENNSYLVANIA Posts: 107	got a set of 15x8 mags with 75% 33" boggers for 80 bucks at a swap meet once a set of 5 points for the crawler for 25 shipped __________________ RNR FABRICATION ON THE EAST COAST!!! cullin1234@yahoo.com (814)-516-5176 can recieve txt R.I.P Derek James Black 1995-2010 I miss you BUD! "THE GENERAL" My build http://www.ttora.com/forum/showthread.php?t=175166

05-29-2011, 11:21 PM	#362
student's tundra Senior Member Join Date: Jan 2007 Location: Tustin, CA Posts: 184	Bought a bed extender for my 1st gen tundra for $40 and spent another $15.95 on the quick release latches so total invested was $55.95 __________________ 2003 Tundra Imperial Jade TRD offroad I gotta have my toyz do you?

05-31-2011, 11:20 PM	#365
Elton Veteran Member Join Date: Jul 2009 Location: OREGON Posts: 589	two 14'' magnaflow mufflers for 45 shipped one was the polished one that is 99 shipped alone amazon warehouse deals ftw ! __________________ 98 4runner SR5 3.4L 5spd 4x4 E-Locker Mods 07 Tundra 5.7L 4x4 Limited Double Cab 90 acura integra b18b daily driver Last edited by Elton; 06-01-2011 at 04:15 PM.

09-18-2011, 12:50 PM	#366
haddix Veteran Member Join Date: Jun 2008 Location: Richmond KY Posts: 624	Warn MX8000 Free! Plan to clean it up and mount it on my dbl cab. __________________ 2003 Tacoma TRD DCab- SAW, Dakar, OME nitrocharger sport, custom sliders/rear bumper, ARB, softopper, 255/85 KM2[b]

09-19-2011, 06:46 PM	#367
Batyc1 Member Join Date: Nov 2010 Location: Lafayette, Georgia Posts: 39	Got a 85 Waggy Dana 44 front with a set of flat top knuckles for a 30 pack of Natty last week! __________________ 1995 Taco locked front and rear and a few other goodies. 1998 4-runner limited. 2000 tacoma

05-30-2011, 10:08 AM	#363
ainokea Senior Member Join Date: Dec 2006 Posts: 443	As much as I didn't want to put them on, I scored a brand new set of polished stainless nerf bars for my Tundra to help my VERY pregnant wife get in and out of the truck for 80 clams.... She would not be able to ride in it without them.

11-11-2011, 10:51 AM	#368
killzone90 Member Join Date: Mar 2011 Posts: 68	Got a bikini top kit for my 87 4runner of Craigslist for 40 Topper for my 96 taco 50 bucks Craigslist I also bought front spacers 40 off somone on here and rear toytech 2 inchlift shackles off somone from here for 60.so my whole lift was 100 bucks Sent from my LG-P509 using Tapatalk

01-30-2012, 11:01 AM	#369
tennessee01tacoma Senior Member My Rig: 2001 Tacoma Join Date: May 2006 Location: Joyner, Tennessee Posts: 211	Got a yakima mega load warrior off craigslist for 80 bucks like new with the fairing __________________ 01 Tacoma 4x4 xCab 2.7l, Bilstein 5100's, Top Gun Customz Lift Shackles, HardKnox Fabworks Sliders, Custom Sway-bar Disconnects 285/75/r16

01-30-2012, 06:40 PM	#370
dcpsychobilly Senior Member My Rig: 04 dbl cab Join Date: Jul 2011 Location: Aurora Co Posts: 208	I was once picked up a ramsey accessories winch kit for five bucks brand new with gloves tree strap dring and snatch block all brand new in carry bag in original box

01-31-2012, 07:18 AM	#371
sdtaco Senior Member Join Date: Jul 2005 Location: San Diego Posts: 272	A hot little Colombian in Costa Rica. __________________ 06 Taco 4x4 DC LB. Work in progress... ICON C/O's resis front and rear TC UCA's Heim joint Mojave ATX 17' BFG AT's 33"

03-27-2012, 07:07 PM	#375
knuckleduster271 Veteran Member Join Date: Dec 2006 Location: Galion Ohio Posts: 762	I picked up a 4.88 geared front clamshell with all the complete front end parts (owner sas'd his truck) for $175. I had to drive 2.5 hrs to get it but didn't bother me at all __________________ 96 4x4 xtra cab 2.7 auto 270k and counting. Bilstein 5100's, rear lock right, fiberglass fenders, rhino'ed rockers, bumpers, 33x10.50x15 BFG MT'S, Crager soft 8's, pre runner light bar with 4 cheap harbor frieght off road lights DECEASED 1998 4x4 xtra cab 2.7 5spd stock for now.

03-27-2012, 08:34 PM	#377
bradleyem Veteran Member Join Date: Apr 2005 Location: Columbus, OH Posts: 1,554	Maybe not the best thing, but I just got an HP DesignJet 750C Plus plotter given to me. I spent about $20 on parts to refurbish it. It will print up to 36" wide color blueprints, so I don't have to try to read prints from 8.5 x 11 paper anymore. As a bonus it will print poster size photos in 600 x 600 resolution. Sent from my DROID RAZR using Tapatalk Attached Thumbnails __________________ Newest Project: 1990 4x4 Standard Cab Winter beater, wheeler and possible SAS...IF I can save it from the Ohio cancer But, for $500, I'm not complaining

03-27-2012, 10:35 PM	#378
Rock_toy Newbie Join Date: Mar 2012 Posts: 23	A pair of used 27 spline longfields. $70 I called and they still have a life time warranty, even used.

03-31-2012, 09:43 PM	#379
Doc2012 Senior Member My Rig: 1999 4runner Join Date: Nov 2010 Location: Conover, NC but stationed in camp LeJeune. Posts: 134	8.4 axle housing-60 chevy 63's-50 3 manual knuckles and a manual transfer case- 300, so less than 100 a piece. Little more than 100, but also got a full set(F&R) of 4.88 with ARB air lockers, compressor, switches, harness, and accessory kit for 1975..... __________________ "Burning bald tires is like blowing it in a pregnant chick. Might as well. The damage is already done."

04-10-2012, 12:05 AM	#380
BigChalupa Senior Member My Rig: 1990 Toyota Pickup Join Date: Dec 2010 Location: Loveland Colorado Posts: 139	Got two off these bad boys for 100 bucks on Amazon. 2 12" subs 1200 watts a peice. The best thing i got latley for 100 smackaroos. __________________ 1990 Ex Cab Pickup -R.I.P 1990 Ex Cab Pickup- 4inch lift, LockRight rear.

04-20-2012, 10:19 PM	#381
higherlux Member My Rig: 1998 taco, 86 pickup Join Date: May 2009 Location: SC Posts: 59	third gen toyota 2wd, automatic with a knocking 22re........................50$ __________________ builds "dedicated mall crawler":wink: http://www.tacomaworld.com/forum/1st...xes-build.html "pile of potential and money........mostly money" out:http://www.tacomaworld.com/forum/oth...86-toyota.html

04-21-2012, 09:51 AM	#384
Jones Senior Member Join Date: Sep 2009 Location: Whistler, BC Posts: 350	Got a pair of buckets out of a civic for $60. Still working on mounting them well. They were most recently out of an '86 toyota pickup, and have the rails to match. So far I've just bolted them to 1x1 bar and that to the stock mounts, but they sit high and not real solid. Still way better than the 60/40 bench! __________________ Anti-Seize: I put that S#!+ on everything! 98 Tacoma, 2.7L auto, front bilsteins, allpro uca's, rear air springs

05-12-2012, 09:24 PM	#385
knuckleduster271 Veteran Member Join Date: Dec 2006 Location: Galion Ohio Posts: 762	I picked up an elocker complete from drum to drum last week on cl for $230.00 non abs, 4.10. Now I just gotta find a computer, switch and harness __________________ 96 4x4 xtra cab 2.7 auto 270k and counting. Bilstein 5100's, rear lock right, fiberglass fenders, rhino'ed rockers, bumpers, 33x10.50x15 BFG MT'S, Crager soft 8's, pre runner light bar with 4 cheap harbor frieght off road lights DECEASED 1998 4x4 xtra cab 2.7 5spd stock for now.

05-13-2012, 09:09 AM	#386
LIVES4CRAWLIN Senior Member Join Date: Jun 2010 Posts: 393	You don't need the computer switch and harness for that elocker. Just saying you can spend 12.00 on a switch plus wiring and never have to worry about it . That's how mine are wired in. I can't remember the link to the write up I followed but so much easier than messing with a shit ton of relays, My best buy under a 100$ ever was a functioning elocker third for 35 bucks __________________ 2006 DCSB, old man heavies with dakars out back, pro comp alloys 16 inchers 4.5 bs. 285s, some bedliner here and there, BHM, Blacked tailight housing mod, 85 4runner, 5.29s, 14in bob, locked, and waiting 92 std cab: Sas'd elocked dual cased and a 3 slow . 37x12.50 pitbull rockers , dirty 30s and elocked

05-13-2012, 09:23 AM	#387
knuckleduster271 Veteran Member Join Date: Dec 2006 Location: Galion Ohio Posts: 762	I was looking at 12voltguy.coms harness- its about $145 I may try to wire it myself. Not real familiar with these yet and doing research. __________________ 96 4x4 xtra cab 2.7 auto 270k and counting. Bilstein 5100's, rear lock right, fiberglass fenders, rhino'ed rockers, bumpers, 33x10.50x15 BFG MT'S, Crager soft 8's, pre runner light bar with 4 cheap harbor frieght off road lights DECEASED 1998 4x4 xtra cab 2.7 5spd stock for now.

05-13-2012, 10:18 AM	#388
LIVES4CRAWLIN Senior Member Join Date: Jun 2010 Posts: 393	Here's the link I started with on doing my front an rear elockers http://www.toyota-4runner.org/3rd-ge...er-wiring.html __________________ 2006 DCSB, old man heavies with dakars out back, pro comp alloys 16 inchers 4.5 bs. 285s, some bedliner here and there, BHM, Blacked tailight housing mod, 85 4runner, 5.29s, 14in bob, locked, and waiting 92 std cab: Sas'd elocked dual cased and a 3 slow . 37x12.50 pitbull rockers , dirty 30s and elocked Last edited by LIVES4CRAWLIN; 05-13-2012 at 10:22 AM. Reason: Forgot the link :/

05-13-2012, 10:21 AM	#389
LIVES4CRAWLIN Senior Member Join Date: Jun 2010 Posts: 393	It really made it easy , limit switches are built into the actuators , and the truck I did this on had been wired up using Toyota relays , and it was a nightmare to chase gremlins since then , I haven't had a single problem with mine , I looked at the 12 volt guys kit, but I figured I'd try using the dpdt switch (I ordered mine from OTRATTW.com) one says rear locker the other days front , __________________ 2006 DCSB, old man heavies with dakars out back, pro comp alloys 16 inchers 4.5 bs. 285s, some bedliner here and there, BHM, Blacked tailight housing mod, 85 4runner, 5.29s, 14in bob, locked, and waiting 92 std cab: Sas'd elocked dual cased and a 3 slow . 37x12.50 pitbull rockers , dirty 30s and elocked

05-14-2012, 07:41 PM	#390
knuckleduster271 Veteran Member Join Date: Dec 2006 Location: Galion Ohio Posts: 762	So how much did you end up having in it? Just curious as to what I'd have in just parts vs something that's plug and play. __________________ 96 4x4 xtra cab 2.7 auto 270k and counting. Bilstein 5100's, rear lock right, fiberglass fenders, rhino'ed rockers, bumpers, 33x10.50x15 BFG MT'S, Crager soft 8's, pre runner light bar with 4 cheap harbor frieght off road lights DECEASED 1998 4x4 xtra cab 2.7 5spd stock for now.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
scored-85 efi.....w/auto	nation	Pickup/4Runner Tech	24	03-13-2009 02:27 PM
I Scored	84runner	Interior/Electrical/Electronics	4	05-30-2008 12:13 AM
Scored shock shafts? this can't be good...	Happysmiley	Long-Travel Suspension Tech	5	04-18-2007 10:42 PM
Just scored a motor for the buggy!	TOYMINATOR	Rock Buggy/Truggy Build Ups	37	01-22-2007 09:46 AM
Is it a bad thing if..	gearbox	Late Tacoma Tech	7	05-28-2006 03:55 AM