Lift Spindles for 2wd Toyota Pickup

C4 Cory · 12-10-2008, 07:45 PM

I am still making these as of 8-13-12 and now $275 with you supplying the spindles

Custom made lift spindles for 95 and older 2wd 5lug toyota pickup 3" of lift, 1.5" wider per side. works with stock arms, aftermarket arms and can easily be modified for a uni ball lower mount too my # (760)seven99-967six

I still make these but i can't find any more stock spindles around here to use. So if anyone want a pair I can do them if you get me 2 pairs of stock spindles and $275. I ceaned out the junkyards around here.

Whatthepho? · 12-10-2008, 11:54 PM

Were these for the 6 lugs or 5 Lugs?

C4 Cory · 12-11-2008, 12:11 PM

5 lug

TRD_yota · 12-11-2008, 06:48 PM

hey dude how many have you sold? and can i get a structural opinion on these? anyone else buy some?

C4 Cory · 12-12-2008, 11:46 AM

My friend is running them on his 94, and I would bet that they are stronger than the fabtek ones.

TRD_yota · 12-12-2008, 12:45 PM

well if they are stronger than the fagtech ones then thats good enough for me. so i take it your a metal fabricator. so then i might want to pick up a set. i have a spare set of spindles just i dont have 350 lying around. how long do you plan on selling them? and were is yucca valley? im in san bernardino. thanks and have any more pictures?

C4 Cory · 12-12-2008, 01:45 PM

I plan to make more an dkeep on making them. Yucca is about an hour from san bernardino

TRD_yota · 12-13-2008, 04:34 PM

what is the material do you use?

C4 Cory · 12-13-2008, 09:51 PM

2 pairs of stock spindles and cold rolled plat

TRD_yota · 12-13-2008, 10:20 PM

so 4 spindles and plate? Sounds sturdy. I'll let you know when I get some cash to get them.

C4 Cory · 12-16-2008, 07:29 PM

yeah, They make me wish I had one of these trucks just so I could put them on it.

trdtacoprerunr · 12-16-2008, 09:50 PM

u should make some spindles for 01-04 id buy them

C4 Cory · 12-18-2008, 04:50 PM

I would, but I need some stock ones ot mess with and build them from

Obsessed Motorsports · 01-08-2009, 05:29 PM

There are other fabicated spindles out there for these trucks. We also make them. I don't want to hijack so I will leave it at that.

C4 Cory · 01-09-2009, 09:50 PM

I sold this set, but I should have another set done by monday.

TRD_yota · 02-03-2009, 10:17 PM

dude can you get pictures of the spindles on your friends truck and how they look?

C4 Cory · 03-07-2009, 09:00 PM

It has been a wile but I have another set ready and here they are on a truck with sagging torsion bars and it's not a good pic but you get the idea

TRD_yota · 03-07-2009, 09:15 PM

so thats lifted 3 inches in the front? but i see those are the stock wheels and tires which have no offset. look good i just got to scrounge some money to get some.

C4 Cory · 04-29-2009, 07:33 PM

I still make these but i can't find any more stock spindles around here to use. So if anyone want a pair I can do them if you get me 2 pairs of stock spindles and $300. I ceaned out the junkyards around here.

TRD_yota · 04-29-2009, 07:59 PM

2 pairs and 300 bucks?you mean like 4 spindles or just 2?

C4 Cory · 04-29-2009, 09:22 PM

it takes 2 pairs of stock to make one pair of lift

C4 Cory · 05-05-2009, 08:56 PM

bump

jmcgowan79 · 06-07-2009, 12:38 AM

What's the turn around time if we have to send you our spindles off our truck (+ a pair from junkyard)

C4 Cory · 06-07-2009, 03:21 PM

I can get them done in 2 days

C4 Cory · 10-01-2010, 09:08 PM

I have set made and ready to sell now as of 10-1-10 they will go fast

C4 Cory · 05-13-2012, 09:22 PM

I do still make these, it's just that I can't keep any around cause they sell before I can finsh them or someone brought me there spindles to turn into lift spindles, witch is more common cause I have used most of the junk yard spindles around here.

C4 Cory · 08-16-2012, 09:21 AM

If anyone kind of close to 92248 has any stock spindles setting around that they want to get rid of for a little $ please let me know, I have a few people that want lift spindles

12-10-2008, 07:45 PM	#1
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	Lift Spindles for 2wd Toyota Pickup I am still making these as of 8-13-12 and now $275 with you supplying the spindles Custom made lift spindles for 95 and older 2wd 5lug toyota pickup 3" of lift, 1.5" wider per side. works with stock arms, aftermarket arms and can easily be modified for a uni ball lower mount too my # (760)seven99-967six I still make these but i can't find any more stock spindles around here to use. So if anyone want a pair I can do them if you get me 2 pairs of stock spindles and $275. I ceaned out the junkyards around here. __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it) Last edited by C4 Cory; 08-16-2012 at 09:14 AM. Reason: lower the price

12-11-2008, 12:11 PM	#3
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	5 lug __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

12-12-2008, 11:46 AM	#5
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	My friend is running them on his 94, and I would bet that they are stronger than the fabtek ones. __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

12-12-2008, 01:45 PM	#7
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	I plan to make more an dkeep on making them. Yucca is about an hour from san bernardino __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

12-13-2008, 09:51 PM	#9
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	2 pairs of stock spindles and cold rolled plat __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

12-11-2008, 06:48 PM	#4
TRD_yota Member iTrader: (0) Join Date: Sep 2008 Posts: 33	hey dude how many have you sold? and can i get a structural opinion on these? anyone else buy some?

12-12-2008, 12:45 PM	#6
TRD_yota Member iTrader: (0) Join Date: Sep 2008 Posts: 33	well if they are stronger than the fagtech ones then thats good enough for me. so i take it your a metal fabricator. so then i might want to pick up a set. i have a spare set of spindles just i dont have 350 lying around. how long do you plan on selling them? and were is yucca valley? im in san bernardino. thanks and have any more pictures?

12-13-2008, 04:34 PM	#8
TRD_yota Member iTrader: (0) Join Date: Sep 2008 Posts: 33	what is the material do you use?

12-13-2008, 10:20 PM	#10
TRD_yota Member iTrader: (0) Join Date: Sep 2008 Posts: 33	so 4 spindles and plate? Sounds sturdy. I'll let you know when I get some cash to get them.

12-16-2008, 07:29 PM	#11
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	yeah, They make me wish I had one of these trucks just so I could put them on it. __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it) Last edited by C4 Cory; 12-18-2008 at 12:32 PM.

12-16-2008, 09:50 PM	#12
trdtacoprerunr Member iTrader: (2) My Rig: 04 taco dcab Join Date: Jul 2007 Posts: 69	u should make some spindles for 01-04 id buy them

12-18-2008, 04:50 PM	#13
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	I would, but I need some stock ones ot mess with and build them from __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

01-08-2009, 05:29 PM	#14
Obsessed Motorsports Newbie iTrader: (0) Join Date: Jan 2009 Posts: 1	There are other fabicated spindles out there for these trucks. We also make them. I don't want to hijack so I will leave it at that.

01-09-2009, 09:50 PM	#15
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	I sold this set, but I should have another set done by monday. __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

02-03-2009, 10:17 PM	#16
TRD_yota Member iTrader: (0) Join Date: Sep 2008 Posts: 33	dude can you get pictures of the spindles on your friends truck and how they look?

03-07-2009, 09:00 PM	#17
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	It has been a wile but I have another set ready and here they are on a truck with sagging torsion bars and it's not a good pic but you get the idea __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it) Last edited by C4 Cory; 08-16-2012 at 09:08 AM.

03-07-2009, 09:15 PM	#18
TRD_yota Member iTrader: (0) Join Date: Sep 2008 Posts: 33	so thats lifted 3 inches in the front? but i see those are the stock wheels and tires which have no offset. look good i just got to scrounge some money to get some.

04-29-2009, 07:33 PM	#19
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	I still make these but i can't find any more stock spindles around here to use. So if anyone want a pair I can do them if you get me 2 pairs of stock spindles and $300. I ceaned out the junkyards around here. __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

04-29-2009, 07:59 PM	#20
TRD_yota Member iTrader: (0) Join Date: Sep 2008 Posts: 33	2 pairs and 300 bucks?you mean like 4 spindles or just 2?

04-29-2009, 09:22 PM	#21
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	it takes 2 pairs of stock to make one pair of lift __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

05-05-2009, 08:56 PM	#22
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	bump __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

06-07-2009, 12:38 AM	#23
jmcgowan79 Newbie iTrader: (0) Join Date: Jun 2009 Location: PHX, AZ Posts: 4	What's the turn around time if we have to send you our spindles off our truck (+ a pair from junkyard)

06-07-2009, 03:21 PM	#24
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	I can get them done in 2 days __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

10-01-2010, 09:08 PM	#25
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	I have set made and ready to sell now as of 10-1-10 they will go fast __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

05-13-2012, 09:22 PM	#26
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	I do still make these, it's just that I can't keep any around cause they sell before I can finsh them or someone brought me there spindles to turn into lift spindles, witch is more common cause I have used most of the junk yard spindles around here. __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

08-16-2012, 09:21 AM	#27
C4 Cory Senior Member iTrader: (2) Join Date: May 2006 Location: Yucca Valley, CA Posts: 228	If anyone kind of close to 92248 has any stock spindles setting around that they want to get rid of for a little $ please let me know, I have a few people that want lift spindles __________________ 04 Tacoma D-Cab TRD 4wd 85 4wd pickup (or, whats left it)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What are lift spindles?	navyseals101	Newbie Tech	6	07-19-2007 07:47 PM
FS 1994 Toyota Pickup 4x4 w lift n BFG's	toyotamudfun	Classifieds	1	04-22-2007 08:41 AM
FS 1994 Toyota Pickup 4x4 w lift n BFG's	toyotamudfun	Rigs/Trailers For Sale	5	04-22-2007 08:40 AM
FS:1986 Toyota Pickup 4x4 3"lift, 33's in MD	05TuRDTACO	Rigs/Trailers For Sale	4	11-20-2006 07:18 PM
Tuff Country 5" lift! Spindles will work w/ ProComp lift	MadMaxz	Suspension	1	06-26-2006 02:44 PM