toytec/eibach front coil lift springs - Page 2

csagen · 05-03-2012, 04:38 PM

Thanks for the opinion.

I have a 2004 DC V6 4x4 no bumper yet but will have one in the future. I just wasn't sure if a bumper and winch will drop it lower even though they are 620lb coils.

Roll Tide · 05-08-2012, 03:26 PM

Hey I just received the ULK today from Toytec, and the collar is in the middle of the threads...anyone know what setting that is...?

**ToyTec** · 05-08-2012, 04:43 PM

Quote:

Originally Posted by Roll Tide

Hey I just received the ULK today from Toytec, and the collar is in the middle of the threads...anyone know what setting that is...?

The amount of lift you get with setting we send them at will vary from vehicle to vehicle depending on weight differences. Generally they will give 2.5-3" of lift where we set them.

If you guys have questions regarding the different coil over options we have please feel free to give us a call. We have a variety of different spring rates available. Generally we recommend 600#/in. But we do have 500's, 600's, 650's, 700's, and even a few 800's laying around for the 2nd gen tundra double cabs.

Thanks!

Jeff

Roll Tide · 05-13-2012, 07:26 PM

Alright boys...Its installed...and the ride is MUCH, MUCH better with the billie 5100 adjustables and Eibach coils. I have the 2.7l 4cyl and no added weight on the front except for a fairly light brush bar and some lights...I also used billie 5100's on the back with a Deaver AAL and my truck sits level. I'm sure I could drop the spring down some on the front and make it ride softer as well.

**ToyTec** · 05-16-2012, 09:27 AM

Glad to hear you like the ride!

Roll Tide · 05-17-2012, 07:45 AM

I left the settings where they were. If I drop the spring down, will I lose lift?

Sent from my DROID RAZR using Tapatalk 2

sirsaechao · 05-17-2012, 07:58 AM

You mean if you adjust the co down? Yes you will lose height or gain depending on what you want but 3" is max anyone should go.

Roll Tide · 05-17-2012, 04:26 PM

What is confusing is some say that since the Eibach coil is taller it will retain the lift...I dunno...

Sent from my DROID RAZR using Tapatalk 2

Roll Tide · 05-18-2012, 06:22 PM

Chime in Toytec?

Sent from my DROID RAZR using Tapatalk 2

**ToyTec** · 05-21-2012, 09:44 AM

Yes, if it is adjusted down you will lose ride height.

For 3" of lift you want to have your center of hub to fender measurement right at 23".

05-16-2012, 09:27 AM	#35
ToyTec Senior Member TTORA GOLD Sponsor Join Date: Dec 2004 Location: Northglenn, Colorado Posts: 489	Glad to hear you like the ride! __________________ http://www.toyteclifts.com 303.255.4959 PM me with any questions.

05-17-2012, 07:58 AM	#37
sirsaechao Veteran Member My Rig: 2002 Toyota Tacoma Join Date: Sep 2007 Location: Nor Cal Posts: 631	You mean if you adjust the co down? Yes you will lose height or gain depending on what you want but 3" is max anyone should go. __________________ 2002 Toyota Tacoma SR5 TRD 3.4L 4WD ext cab: King Off-Road Racing Shocks 2.5" coilovers Wheeler's Off-Road Inc. 5-leaf rear leaf pack Old Man Emu NitroCharger Sport rear shocks 16" x 8" Pro Comp 7069's w/ 265/75R16 Cooper ATP's Magnaflow muffler, AEM Bruteforce intake Full JL Audio sound system See below...to much to list Click Here To See My Junk

05-21-2012, 09:44 AM	#40
ToyTec Senior Member TTORA GOLD Sponsor Join Date: Dec 2004 Location: Northglenn, Colorado Posts: 489	Yes, if it is adjusted down you will lose ride height. For 3" of lift you want to have your center of hub to fender measurement right at 23". __________________ http://www.toyteclifts.com 303.255.4959 PM me with any questions.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Toytec/Eibach coil setting on 5100s	redbandit	Suspension	11	01-10-2011 03:22 PM
Toytec/Eibach front coil lift springs	rayny1014	Suspension	3	11-21-2010 07:48 PM
BILSTEIN (EIBACH) COIL SPRINGS 550lb - PHX AZ	fibbado	Parts/Electronics/Wheels & Tires For Sale	1	07-03-2010 12:00 PM
Eibach 3" lift springs vs Toytech spacer?	ttribe	Early Tacoma Tech	10	06-12-2010 10:55 PM
eibach lift coil/taco question	comajoe	FJ Cruiser Tech	0	10-03-2009 10:14 PM

05-03-2012, 04:38 PM	#31
csagen Member My Rig: 2004 Tacoma DC Join Date: Dec 2011 Location: Denver, CO Posts: 44	Thanks for the opinion. I have a 2004 DC V6 4x4 no bumper yet but will have one in the future. I just wasn't sure if a bumper and winch will drop it lower even though they are 620lb coils.

05-08-2012, 03:26 PM	#32
Roll Tide Senior Member My Rig: 2001 Toyota Tacoma Join Date: Dec 2010 Location: Connersville Indiana Posts: 153	Hey I just received the ULK today from Toytec, and the collar is in the middle of the threads...anyone know what setting that is...?

05-13-2012, 07:26 PM	#34
Roll Tide Senior Member My Rig: 2001 Toyota Tacoma Join Date: Dec 2010 Location: Connersville Indiana Posts: 153	Alright boys...Its installed...and the ride is MUCH, MUCH better with the billie 5100 adjustables and Eibach coils. I have the 2.7l 4cyl and no added weight on the front except for a fairly light brush bar and some lights...I also used billie 5100's on the back with a Deaver AAL and my truck sits level. I'm sure I could drop the spring down some on the front and make it ride softer as well.

05-17-2012, 07:45 AM	#36
Roll Tide Senior Member My Rig: 2001 Toyota Tacoma Join Date: Dec 2010 Location: Connersville Indiana Posts: 153	I left the settings where they were. If I drop the spring down, will I lose lift? Sent from my DROID RAZR using Tapatalk 2

05-17-2012, 04:26 PM	#38
Roll Tide Senior Member My Rig: 2001 Toyota Tacoma Join Date: Dec 2010 Location: Connersville Indiana Posts: 153	What is confusing is some say that since the Eibach coil is taller it will retain the lift...I dunno... Sent from my DROID RAZR using Tapatalk 2

05-18-2012, 06:22 PM	#39
Roll Tide Senior Member My Rig: 2001 Toyota Tacoma Join Date: Dec 2010 Location: Connersville Indiana Posts: 153	Chime in Toytec? Sent from my DROID RAZR using Tapatalk 2