Southerner heading to Colorado - Page 2

sploosh · 05-09-2012, 10:18 AM

I'm from Sale Creek, between Dayton and Soddy-Daisy. I just say north of Chattanooga because noone knows where the hell Sale Creek is, lol. We're driving there this weekend to spend 2 weeks. Going to Tellico to fish too.

Red Brewer · 05-09-2012, 12:11 PM

You MISS humidity? Wow. Takes all kinds I guess, I can't stand humidity.

Avsfreak1234 · 05-09-2012, 12:37 PM

Quote:

Originally Posted by Red Brewer

You MISS humidity? Wow. Takes all kinds I guess, I can't stand humidity.

ya I thought that was a little weird when I read it too. I lived in GA for a few years. humid as fuck. Ill take our dry air any day. Id rather not have my back stick to the couch while sitting in my air conditioned house...

Goldfinger · 05-09-2012, 02:57 PM

I had an NCO Academy instructor that was from Soddy-Daisy. We gave him plenty of grief about that name.

sploosh · 05-09-2012, 05:42 PM

Quote:

Originally Posted by Avsfreak1234

ya I thought that was a little weird when I read it too. I lived in GA for a few years. humid as fuck. Ill take our dry air any day. Id rather not have my back stick to the couch while sitting in my air conditioned house...

Sarcasm guys. But if you grow up in that shit you do think it's a bit strange when you move to Colorado and start having to use lotion.

sploosh · 05-09-2012, 05:42 PM

Quote:

Originally Posted by Goldfinger

I had an NCO Academy instructor that was from Soddy-Daisy. We gave him plenty of grief about that name.

I don't really see anything wrong with it, but I'm not from there so alright.

Red Brewer · 05-10-2012, 12:20 AM

Well thank the lord for that.

crolison · 05-10-2012, 03:09 PM

Quote:

Originally Posted by sploosh

Sarcasm guys. But if you grow up in that shit you do think it's a bit strange when you move to Colorado and start having to use lotion.

Hahaha

I succesfully made my first trip out, flew into the atl today and heading back out Sunday after a wedding.

crolison · 05-10-2012, 05:33 PM

Also,

Where are good places to get co2 filled at?

Places to get metal at? Any good place for drop pieces?

mrdoug · 05-11-2012, 07:43 AM

There's some old sticky's with the steel and co2 info:

Steel:
http://www.tacomaterritory.com/forum...d.php?t=122942

co2 (look down a page or so in the first post):
http://www.tacomaterritory.com/forum...d.php?t=138681

There's also a sticky for junk yards that you'll probably find handy:
http://www.tacomaterritory.com/forum...d.php?t=131196

crolison · 05-15-2012, 09:21 PM

Thanks,

I picked up some steel from K and K today for some misc projects and new sliders. Worth the ten bucks and not have to cut my own haha.

ike · 05-17-2012, 12:26 AM

For bulk square tube r and s is the shit

Gotta get 20 ft sticks and 300 bucks worth though but they are about half everyone else I priced out per foot.

05-09-2012, 10:18 AM	#31
sploosh Veteran Member My Rig: 2001 Tacoma Join Date: Apr 2005 Location: Colorado Posts: 1,408	I'm from Sale Creek, between Dayton and Soddy-Daisy. I just say north of Chattanooga because noone knows where the hell Sale Creek is, lol. We're driving there this weekend to spend 2 weeks. Going to Tellico to fish too. __________________ 2001 Tacoma, slightly modified

05-09-2012, 12:11 PM	#32
Red Brewer Veteran Member Join Date: Jun 2009 Location: Idaho Springs Posts: 818	You MISS humidity? Wow. Takes all kinds I guess, I can't stand humidity. __________________ '01 Taco, DD, 33's, dented armor, squeaks, rattles '80 Pickup, 35's, locked, armored, geared, lifted, and does ok when the hubs are locked in.

05-09-2012, 02:57 PM	#34
Goldfinger Veteran Member Join Date: Jan 2011 Location: Colorado Springs, CO Posts: 561	I had an NCO Academy instructor that was from Soddy-Daisy. We gave him plenty of grief about that name. __________________ 1994 Toyota Pickup, 40's, duals, exo

05-10-2012, 12:20 AM	#37
Red Brewer Veteran Member Join Date: Jun 2009 Location: Idaho Springs Posts: 818	Well thank the lord for that. __________________ '01 Taco, DD, 33's, dented armor, squeaks, rattles '80 Pickup, 35's, locked, armored, geared, lifted, and does ok when the hubs are locked in.

05-10-2012, 05:33 PM	#39
crolison Veteran Member My Rig: Shorter Bus Join Date: Mar 2007 Location: Berkeley, CO Posts: 5,216	Also, Where are good places to get co2 filled at? Places to get metal at? Any good place for drop pieces? __________________ I am General Corrosion Corrosion: - 97 4runner 2.7 (fat and slow) lost but not forgotten Shorter Bus: - 98 taco 2.7 300k miles (fat, old and slow) lost but not forgotten Short Round: - 97 single cab (2' of sheet metal) Too nice: - 99 4runner 3.4 5spd DD

05-11-2012, 07:43 AM	#40
mrdoug Veteran Member My Rig: 3.4 swapped 85 xcab Join Date: Dec 2007 Location: Loveland, CO Posts: 7,465	There's some old sticky's with the steel and co2 info: Steel: http://www.tacomaterritory.com/forum...d.php?t=122942 co2 (look down a page or so in the first post): http://www.tacomaterritory.com/forum...d.php?t=138681 There's also a sticky for junk yards that you'll probably find handy: http://www.tacomaterritory.com/forum...d.php?t=131196 __________________ de·gen·er·ate I'm outside your window watching you read this.

05-15-2012, 09:21 PM	#41
crolison Veteran Member My Rig: Shorter Bus Join Date: Mar 2007 Location: Berkeley, CO Posts: 5,216	Thanks, I picked up some steel from K and K today for some misc projects and new sliders. Worth the ten bucks and not have to cut my own haha. __________________ I am General Corrosion Corrosion: - 97 4runner 2.7 (fat and slow) lost but not forgotten Shorter Bus: - 98 taco 2.7 300k miles (fat, old and slow) lost but not forgotten Short Round: - 97 single cab (2' of sheet metal) Too nice: - 99 4runner 3.4 5spd DD

05-17-2012, 12:26 AM	#42
ike Veteran Member My Rig: 1999 tacoma Join Date: Sep 2006 Location: Loveland CO Posts: 19,889	For bulk square tube r and s is the shit Gotta get 20 ft sticks and 300 bucks worth though but they are about half everyone else I priced out per foot. __________________ Degenerate I like goats 87 cherocar 99 v6 trd taco-some stuff 07 Ninja 650R

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anyone heading out to YUMA??	elosak	Off Topic	1	02-25-2010 03:03 PM
Anybody heading from Houston to N TX	DavidW	Classifieds	5	12-26-2009 08:49 PM
Going to be heading that way in may.	yaker	New Members Area	38	12-18-2009 05:12 PM
Heading to SoCal!	TOYMINATOR	General Discussions	24	11-18-2005 12:52 AM