![]() ![]() ![]() |
|
|
|||||||
|
Welcome to the TTORA Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. ATTENTION: In an on-going effort to keep this forum spam free, the Forum Admin approves every new account before giving any posting rights to new users. Accounts are normally approved within 24 hours. Sorry for any inconvenience, but verification of every new account is what will continue to keep this forum spam free. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 |
|
Senior Member
|
so this weekend i had a chance to replace my ball joints, and tie rods. i noticed when replacing the lower ball joints that the shop i took it to 6 years ago didnt place the ball joint in the correct location when they installed the lift, instead of it being in the middle of the spindle, it was placed underneath at the bottom. when i correct the position i noticed it increased my lift by about 2inches. now my question is, are my shocks bad now because on the driver side i can push and rock the front end up and down at least 3 inches, but on the passenger side i cant rock it at all it feels pretty stiff maybe half an inch movement. this is on a 5 lug mini taco. before replacing the ball joints, i could rock both sides up and down pretty freely so im confused :/ anyone?
|
|
|
|
|
|
#2 | |
|
Going John Galt
![]() My Rig: '00 Tacoma
Join Date: Dec 2004
Location: Norcal
Posts: 30,838
|
there are very few here who even have minis. head to Customtacos.com as that site is primarily for your truck.
__________________
Quote:
Inchworm Rock Walkin' Gear |
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| messed up | cmize | Off Topic | 10 | 05-01-2011 11:19 PM |
| Messed up 4wd low | Robb | Pickup/4Runner Tech | 1 | 06-15-2009 12:08 PM |
| are my coilovers messed up? | bigblue05 | Suspension | 4 | 01-09-2007 12:02 PM |
| Messed up 4wd in an 01 | TTT | Newbie Tech | 7 | 10-12-2006 05:43 PM |
| help! my 2wd and 4wd is messed up! | ACE | Early Tacoma Tech | 4 | 09-21-2006 12:15 AM |