NEW! All-Pro 05+ Rear Bumper

**allpro** · 07-15-2009, 01:10 PM

After months of development and testing, All-Pro Off Road is now taking pre-orders for the first run of our new 05+ Tacoma steel plate style rear bumper as seen here:

Get the clearance and strength you need on the rear of your Tacoma with some added style!

Pricing: $649 bare, $749 powdercoated black (powdercoating will not be available on the first run).

Options: Steel plate wrap around side pieces - $99/set; high clearance receiver hitch - $129/ea; lighted license plate frame (as pictured) - $39/ea; D-ring shackles - $13.50/ea

ETA: 4-6 weeks for the bumper & hitches, optional side pieces may be a little longer.

Specs: This bumper is made out of 10 gauge steel plate with 1/4" mounting brackets with integrated shackle mounts. Wrap around side pieces are 7 gauge for added strength in the most vulnerable area. Weight is approx. 75-80 lbs. Additional gusseting and support brackets have been added since the original drawings were posted, more pictures to come.

*Please note that there are currently no provisions for license plate lights, other than using a license plate frame with an integrated light which we will also have available. We are currently looking into other options.

To place a pre-order, give us a call at: 951-658-7077

Scuba · 07-15-2009, 01:25 PM

Looks good guys !!!

Wish I had an 05+ so I could buy one

BeachBoy · 07-15-2009, 02:31 PM

good alternative for those who don't want to cut the bed!

$1004 fully equipped, plus shipping. That's more than a wrap around but worth it for those who wants to be able to get bad to factory.

HD1 · 07-15-2009, 03:28 PM

How soon till they will be available with powdercoat?

**Rockrawler** · 07-15-2009, 04:30 PM

After the first batch goes they will be pre-boxed and powdercoated, until then we can have them done locally by a different coater, but they will need to be picked up here because the boxes & foam molds wont be ready that soon to protect the coating - Phoenix isnt that far of a road trip!

MonkeyProof · 07-15-2009, 04:49 PM

Quote:

Originally Posted by BeachBoy

..........good alternative for those who don't want to cut the bed!

.

good point indeed......you won't have to worry about being giving wrong measurements/deminsions so you wont hack off too much sheetmetal hahaha....buddy of mine just recently learned that one out the hard way

HD1 · 07-15-2009, 04:57 PM

How soon till the first batch goes out? Or will you not know until you get the full order in?

BrandonH · 07-15-2009, 06:18 PM

Quote:

Originally Posted by MonkeyProof

good point indeed......you won't have to worry about being giving wrong measurements/deminsions so you wont hack off too much sheetmetal hahaha....buddy of mine just recently learned that one out the hard way

Yep!!!!

I want mine, but I want it powdercoated. Let me know when I can get that . You know I will come to pick mine up

dtrujillo63 · 07-15-2009, 07:00 PM

Quote:

Originally Posted by MonkeyProof

good point indeed......you won't have to worry about being giving wrong measurements/deminsions so you wont hack off too much sheetmetal hahaha....buddy of mine just recently learned that one out the hard way

Whatcha talking about son? Don't be starting shit again

. I'm 100% satisfied with my REAL hi clearance bumper. After the weather stripping it looks GREAT!

MonkeyProof · 07-15-2009, 07:03 PM

Quote:

Originally Posted by dtrujillo63

Whatcha talking about son? Don't be starting shit again

. I'm 100% satisfied with my REAL hi clearance bumper. After the weather stripping it looks GREAT!

haha...ok mija,,wasnt trying to start shit again....ok..but just a little bit

Ghia Man · 07-15-2009, 08:13 PM

This seems to be the bumper for me. As soon as I get back from Afghanistan, it will be on top of my list of things to get.

dtrujillo63 · 07-15-2009, 10:09 PM

Quote:

Originally Posted by BrandonH

Yep!!!!

I want mine, but I want it powdercoated. Let me know when I can get that . You know I will come to pick mine up

Hey Brandon, if you really want it then get it. I know a place that will powder coat that thing for no more then $50. Grade "A" work too.

J41 · 07-15-2009, 11:51 PM

Quote:

Originally Posted by BrandonH

Yep!!!!

I want mine, but I want it powdercoated. Let me know when I can get that . You know I will come to pick mine up

Hey um...I'll be da first in line if your gonna sell your current tube bumper..Let me know yo!

connor.s · 07-16-2009, 11:12 PM

Any idea when the would actually be out?

**allpro** · 07-17-2009, 08:22 AM

Quote:

Originally Posted by connor.s

Any idea when the would actually be out?

We posted a 4-6 week ETA, but it will probably be closer to 3-4 weeks if there aren't any issues with the production run. We should have the first article on my truck mid next week.

ShowStop · 07-17-2009, 10:48 AM

Bumper looks good! You may want to re-think your choice of wording. "Plate steel" instead of "sheet metal" gives the description the beefier appearance you are probably looking for.

purity · 07-17-2009, 01:13 PM

Quote:

Originally Posted by ShowStop

Bumper looks good! You may want to re-think your choice of wording. "Plate steel" instead of "sheet metal" gives the description the beefier appearance you are probably looking for.

i thought the same thing "why do they keep saying sheet metal?" until i read the part where it says 10 gauge steel plate. much better.

connor.s · 07-18-2009, 02:08 PM

Quote:

Originally Posted by allpro

We posted a 4-6 week ETA, but it will probably be closer to 3-4 weeks if there aren't any issues with the production run. We should have the first article on my truck mid next week.

Awsome thanks alot, im thinking about doing a pre-order that bumper looks clean, good work.

**allpro** · 07-22-2009, 10:54 AM

If you want to be one of the first with these bumpers, get your pre-order in now - we only have about 5 still available! More pictures will be posted by the end of the week of the actual production unit, but here's one recently taken of the prototype in beautiful Montana:

Also, we just got more of our "Steel Plate" Style Front Winch Mount Bumpers in. Buy both front & rear and we'll give you a package deal! New features on the front bumpers include: upgraded 7 gauge lower section - more strength where it is needed most; added clearance around body; & additional corner piece reinforcement. We strive to provide the best products, continually looking for ways to make improvements.

ShowStop · 07-22-2009, 11:02 AM

Quote:

Originally Posted by allpro

Also, we just got more of our "Steel Plate" Style Front Winch Mount Bumpers in. Buy both front & rear and we'll give you a package deal! New features on the front bumpers include: upgraded 7 gauge lower section - more strength where it is needed most; added clearance around body; & additional corner piece reinforcement. We strive to provide the best products, continually looking for ways to make improvements.

See...now doesn't that sound more beefy and rugged?

HD1 · 07-22-2009, 12:40 PM

How much for both front and rear as a package?

**allpro** · 07-22-2009, 04:47 PM

Quote:

Originally Posted by ShowStop

See...now doesn't that sound more beefy and rugged?

Yes, thanks for the suggestion! And we actually made it more beefy & rugged too!

Quote:

Originally Posted by HD1

How much for both front and rear as a package?

Buy the front at regular price, and get any additional armor pieces (including the rear bumper) at 15% off! Plus you'll save on shipping!

SilverSeven · 07-22-2009, 04:51 PM

happy to hear about the restructure. Strength is good. The rear looks nice!

kekoa_8 · 07-28-2009, 01:11 AM

Quote:

Originally Posted by MonkeyProof

good point indeed......you won't have to worry about being giving wrong measurements/deminsions so you wont hack off too much sheetmetal hahaha....buddy of mine just recently learned that one out the hard way

This bumper is nice! And your LT/truck looks great! I bet it performs as good as it looks! I want one but wont be able to afford an LT after I buy a Tacoma next month. Anyways, Nice truck!

Midwayliberator · 07-29-2009, 09:37 PM

Will the stock hitch still fit with the bumper?

freeze · 07-29-2009, 10:27 PM

Quote:

Originally Posted by kekoa_8

This bumper is nice! And your LT/truck looks great! I bet it performs as good as it looks! I want one but wont be able to afford an LT after I buy a Tacoma next month. Anyways, Nice truck!

I recommend it!

kekoa_8 · 07-30-2009, 04:07 AM

Quote:

Originally Posted by freeze

I recommend it!

Your truck looks awesome! Have any more pictures? and Do you mind if I save pics of it to use as inspiration? haha

CronusTRD · 08-03-2009, 02:09 PM

any pictures of these wraparound pieces?

**allpro** · 08-03-2009, 04:05 PM

Just took some pics over the weekend, here's one of the first article in the production run with the wrap-around side pieces:

freeze · 08-04-2009, 04:15 PM

Quote:

Originally Posted by kekoa_8

Your truck looks awesome! Have any more pictures? and Do you mind if I save pics of it to use as inspiration? haha

haha no worries! that's what i've done with other trucks too....like Sarah's

Those side pieces actually look really good!

All these one's Beachboy took... I really dislike mud but out here with the rain can't help it.

07-15-2009, 01:10 PM	#1
allpro Veteran Member TTORA GOLD Sponsor iTrader: (0) Join Date: Jan 2005 Location: Hemet, CA Posts: 952	NEW! All-Pro 05+ Rear Bumper After months of development and testing, All-Pro Off Road is now taking pre-orders for the first run of our new 05+ Tacoma steel plate style rear bumper as seen here: Get the clearance and strength you need on the rear of your Tacoma with some added style! Pricing: $649 bare, $749 powdercoated black (powdercoating will not be available on the first run). Options: Steel plate wrap around side pieces - $99/set; high clearance receiver hitch - $129/ea; lighted license plate frame (as pictured) - $39/ea; D-ring shackles - $13.50/ea ETA: 4-6 weeks for the bumper & hitches, optional side pieces may be a little longer. Specs: This bumper is made out of 10 gauge steel plate with 1/4" mounting brackets with integrated shackle mounts. Wrap around side pieces are 7 gauge for added strength in the most vulnerable area. Weight is approx. 75-80 lbs. Additional gusseting and support brackets have been added since the original drawings were posted, more pictures to come. Please note that there are currently no provisions for license plate lights, other than using a license plate frame with an integrated light which we will also have available. We are currently looking into other options. To place a pre-order, give us a call at: 951-658-7077* __________________ www.allprooffroad.com 951-658-7077 Last edited by allpro; 07-19-2009 at 10:18 AM.

07-15-2009, 08:13 PM	#11
Ghia Man Member iTrader: (0) Join Date: May 2009 Location: Shindand, Afghanistan Posts: 32	This seems to be the bumper for me. As soon as I get back from Afghanistan, it will be on top of my list of things to get. __________________ 2008 four wheel drive X-cab Tacoma, with Fox shocks on all four, 3'' suspension lift, All-Pro UCAs, Borla cat-back, URD Y pipe, ARB Bull Bar, and a Ramsey 9500 winch.

07-16-2009, 11:12 PM	#14
connor.s Member iTrader: (0) Join Date: Oct 2008 Location: Arizona Posts: 77	Any idea when the would actually be out? __________________ lift it high..fat chicks cant jump

07-17-2009, 10:48 AM	#16
ShowStop Member Dismemberer iTrader: (3) Join Date: Dec 2004 Location: SoCal Posts: 13,369	Bumper looks good! You may want to re-think your choice of wording. "Plate steel" instead of "sheet metal" gives the description the beefier appearance you are probably looking for. __________________ Upcoming SoCal Events: Azusa Canyon - Sept 11 Corral Canyon - Sept 25 Less fishing...more wheeling! www.socal4x4geocachers.org Thanks to all the sponsors of the Socal Takeover!

07-22-2009, 10:54 AM	#19
allpro Veteran Member TTORA GOLD Sponsor iTrader: (0) Join Date: Jan 2005 Location: Hemet, CA Posts: 952	If you want to be one of the first with these bumpers, get your pre-order in now - we only have about 5 still available! More pictures will be posted by the end of the week of the actual production unit, but here's one recently taken of the prototype in beautiful Montana: Also, we just got more of our "Steel Plate" Style Front Winch Mount Bumpers in. Buy both front & rear and we'll give you a package deal! New features on the front bumpers include: upgraded 7 gauge lower section - more strength where it is needed most; added clearance around body; & additional corner piece reinforcement. We strive to provide the best products, continually looking for ways to make improvements. __________________ www.allprooffroad.com 951-658-7077

07-15-2009, 02:31 PM	#3
BeachBoy Senior Member iTrader: (0) Join Date: Nov 2006 Posts: 460	good alternative for those who don't want to cut the bed! $1004 fully equipped, plus shipping. That's more than a wrap around but worth it for those who wants to be able to get bad to factory.

07-15-2009, 03:28 PM	#4
HD1 Senior Member iTrader: (0) Join Date: May 2009 Location: Phoenix, AZ Posts: 184	How soon till they will be available with powdercoat?

07-15-2009, 04:30 PM	#5
Rockrawler Senior Member TTORA GOLD Sponsor iTrader: (1) Join Date: Aug 2005 Location: Right Coast Posts: 312	After the first batch goes they will be pre-boxed and powdercoated, until then we can have them done locally by a different coater, but they will need to be picked up here because the boxes & foam molds wont be ready that soon to protect the coating - Phoenix isnt that far of a road trip!

07-15-2009, 04:57 PM	#7
HD1 Senior Member iTrader: (0) Join Date: May 2009 Location: Phoenix, AZ Posts: 184	How soon till the first batch goes out? Or will you not know until you get the full order in?

07-22-2009, 12:40 PM	#21
HD1 Senior Member iTrader: (0) Join Date: May 2009 Location: Phoenix, AZ Posts: 184	How much for both front and rear as a package?

07-22-2009, 04:51 PM	#23
SilverSeven Veteran Member iTrader: (0) Join Date: Mar 2007 Posts: 1,921	happy to hear about the restructure. Strength is good. The rear looks nice! __________________ Big silver truck with black parts and brown spots Rock Solid Toys SilverSeven Gay Ass SAS Page

07-29-2009, 09:37 PM	#25
Midwayliberator Newbie iTrader: (0) Join Date: Jul 2009 Posts: 5	Will the stock hitch still fit with the bumper?

08-03-2009, 02:09 PM	#28
CronusTRD <null> iTrader: (0) Join Date: Oct 2004 Location: MD Posts: 1,757	any pictures of these wraparound pieces? __________________ Dos Tacos and Heep.

08-03-2009, 04:05 PM	#29
allpro Veteran Member TTORA GOLD Sponsor iTrader: (0) Join Date: Jan 2005 Location: Hemet, CA Posts: 952	Just took some pics over the weekend, here's one of the first article in the production run with the wrap-around side pieces: __________________ www.allprooffroad.com 951-658-7077

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ARB bumper, rear bumper, t-case crossmember for 84+ Pickup/4Runner	05TuRDTACO	Parts/Electronics/Wheels & Tires For Sale	6	12-04-2009 10:00 PM
Feeler post for front Winch bumper and rear bumper	FlatFatTaco	Parts/Electronics/Wheels & Tires For Sale	36	11-28-2007 09:58 PM
05+ white grill and rear bumper, solid rear window	yosh2000	Wanted	0	09-16-2007 02:21 AM
01 Chrome Rear Bumper & mounts, Driver side rear fender, Tailgate	dmaxin	Wanted	3	07-23-2006 01:01 PM
3rd gen winch bumper, rear bumper, and sliders	Mossyrocks	Fabrication/Tools	17	05-02-2006 06:58 PM