Another DBL cab sas...

roktaco · 12-13-2005, 06:12 PM

Started work on it today, 3 link is going to be based on Jake's truck, 37 mtrs everyday, 36 iroks on beadlocks for harder trail runs. TRD s/c with URD's fuel mods, auto with marlin dual cases - stock ratio. Jeep J10 front D44 with flat top knuckles, non trd toy rear, 4.89s in front, 4.88 in back, both air locked, Fox 14" coilovers, 63" 2wd chebbys in the rear, maybe double shackle setup, seriously considering bobbing the bed. Warn 9.5 in front, 1.75" .120 wall bumpers and sliders, safari rack if I bob the bed, Thinking about jeep style swing away tire and gas can carrier behind tailgate... maybe just dreaming.
Some pics

GOT COPE? · 12-13-2005, 08:53 PM

Sweet, keep us updated.

clarkrw3 · 12-17-2005, 06:12 PM

sweet keep us updated with lots of pics

Pathtaco · 12-17-2005, 09:09 PM

I love the double cabs with SAS....

Keep up the good work and take lots of pictures and pos them.

FS..

Winch · 12-19-2005, 01:07 PM

Quote:

Originally Posted by roktaco

Started work on it today, 3 link is going to be based on Jake's truck, 37 mtrs everyday, 36 iroks on beadlocks for harder trail runs. TRD s/c with URD's fuel mods, auto with marlin dual cases - stock ratio. Jeep J10 front D44 with flat top knuckles, non trd toy rear, 4.89s in front, 4.88 in back, both air locked, Fox 14" coilovers, 63" 2wd chebbys in the rear, maybe double shackle setup, seriously considering bobbing the bed. Warn 9.5 in front, 1.75" .120 wall bumpers and sliders, safari rack if I bob the bed, Thinking about jeep style swing away tire and gas can carrier behind tailgate... maybe just dreaming.
Some pics

Nice. Post pics as you progress, please. I'd like to get a few tips. Thanks.

roktaco · 01-07-2006, 02:59 PM

Little more work done, parts arriving slowly. Had to send my t-case adaptor back to marlin to have it machined for the proper seal, been 4 weeks and counting. Picking up steel for links on monday and dropping off passenger side knuckle to have it machined and tapped for sky arm at same time. Can't mock up suspension until I have final resting place for double cases...... Made suspension tabs today for axle side. Getting anxious. Going slooooow, damn life keeps getting in the way. I'm out of room for pictures, how do I add them full size like you guys do?

02tacotim · 01-07-2006, 03:09 PM

Looking good. Can't wait to get started on mine next Friday over MLK weekend. Leafs instead of coils for now. Keep up the work and send a bunch of pics.

Tim

pimptoy · 01-07-2006, 03:53 PM

Quote:

Originally Posted by roktaco

Jeep J10 front D44 with flat top knuckles, non trd toy rear, 4.89s in front, 4.88 in back, both air locked, Fox 14" coilovers, 63" 2wd chebbys in the rear,

why are putting 4.89 in the front or did you mean 4.88 Front and Rear

ARB1977 · 01-07-2006, 06:49 PM

Quote:

Originally Posted by roktaco

Started work on it today, 3 link is going to be based on Jake's truck, 37 mtrs everyday, 36 iroks on beadlocks for harder trail runs. TRD s/c with URD's fuel mods, auto with marlin dual cases - stock ratio. Jeep J10 front D44 with flat top knuckles, non trd toy rear, 4.89s in front, 4.88 in back, both air locked, Fox 14" coilovers, 63" 2wd chebbys in the rear, maybe double shackle setup, seriously considering bobbing the bed. Warn 9.5 in front, 1.75" .120 wall bumpers and sliders, safari rack if I bob the bed, Thinking about jeep style swing away tire and gas can carrier behind tailgate... maybe just dreaming.
Some pics

You might want to add a valve body upgrade to you auto tranny, your tranny will thank you for it.

roktaco · 01-08-2006, 04:16 PM

4.88 isn't available for the d44, so 4.89 was the closest available. Valve body upgrade.... trans will be toast without it. Add it to the list.

On the bright side, steering box is up and mounted, frame plated & sleaved on dr side, plated on pass side, made a new front crossmember.

Do I need to have a host to show my pictures?

Paul · 01-08-2006, 04:19 PM

Quote:

Originally Posted by roktaco

Do I need to have a host to show my pictures?

If you want to show bigger pictures you do. (We want bigger pictures

)

AngryAndy · 01-08-2006, 04:21 PM

Quote:

Originally Posted by roktaco

Do I need to have a host to show my pictures?

Yes you do need a host...

photobucket works okay for some...

If you want, you can email them to me and Ill get them up for ya....andy at norcalttora dot com

02tacotim · 01-08-2006, 06:30 PM

What's the deal with the valve body upgrade? I am gonna be going up to 37's after a few months on 35's and I am not aware of this mod. I am going to make the jump to hydro assist when I move to 35's as well and already had my box ported and rebuilt by PSC. Sorry to hijack your post but I wanted to find out what this is.

Tim

roktaco · 01-08-2006, 07:56 PM

Thanks Andy, don't want to bother you so I'll set up a account tommorow to host my pics. I want this this wheeling by Feburary or I'm going to take up ballet. I'll make every effort to keep pics up as I do things. Nothing is new here, just using tried and true designs from members on this board, then add some of my own character to it. Oh yeah, I own a small stereo shop so the inside will be loaded with goodies to

dyogim · 01-09-2006, 05:22 PM

Quote:

Originally Posted by 02tacotim

What's the deal with the valve body upgrade? I am gonna be going up to 37's after a few months on 35's and I am not aware of this mod. I am going to make the jump to hydro assist when I move to 35's as well and already had my box ported and rebuilt by PSC. Sorry to hijack your post but I wanted to find out what this is.

Tim

http://www.ipttrans.com/toyotaauto.shtml#main

You can also scroll down the page to the prices and click on one of the valve body links for more info.

pimptoy · 01-11-2006, 12:49 PM

Quote:

Originally Posted by roktaco

4.88 isn't available for the d44, so 4.89 was the closest available. Valve body upgrade.... trans will be toast without it. Add it to the list.

On the bright side, steering box is up and mounted, frame plated & sleaved on dr side, plated on pass side, made a new front crossmember.

Do I need to have a host to show my pictures?

yes it is cause thats what i have in my front 44. try yukon thats what i have or superior gears guapo69 has those in his 44. but good luck

roktaco · 01-11-2006, 05:38 PM

Guess I didn't do enough searching, randy's ring & pinion didn't show them at the time. This axle was set up 4 years ago, maybe thats why? Don't know, they work fine.

Front range tcase crossmember showed up, nice, ordered bungs for johnny joints from Kar Tech yesterday. Creepin along. Oh yeah, Picked up 3x4 .188 wall steel for 3 link cross member, see if I can get that built tomorrow. Got a photobucket account set up, see if I can put some pictures up.

GOT COPE? · 01-27-2006, 03:09 AM

Update?

roktaco · 01-29-2006, 03:59 PM

Ok, marlin shipped the modified dual case adaptor finally, should be here monday or tues. I sent it off begining of DEC.... they were backed up big time. This is what I have sitting around waiting to find a home, chevy rears, 8 2.5" johnny joints, bunch of 2" .250 wall tube, new warn 9.5, dana 44 with sky's high steer arms installed (got knuckle back from machine shop wednesday), got my springs on the coilovers. As soon as the adapor is here I'll put it in and then I can locate my front suspension crossmember, oh yeah have the front range crossmember as well, and all the 1.75 x .120 wall tube for bumpers, sliders, etc. Frustrating
Steve

ARB1977 · 01-29-2006, 04:28 PM

Quote:

Originally Posted by 02tacotim

What's the deal with the valve body upgrade? I am gonna be going up to 37's after a few months on 35's and I am not aware of this mod. I am going to make the jump to hydro assist when I move to 35's as well and already had my box ported and rebuilt by PSC. Sorry to hijack your post but I wanted to find out what this is.

Tim

All the valve body does is increase the line pressure if you have an auto tranny so you dont burn up the clutch packs or any other part in the tranny.

roktaco · 02-01-2006, 02:29 PM

roktaco · 02-01-2006, 02:31 PM

try againhttp://i46.photobucket.com/albums/f147/goinmxn/000_0043.jpg

roktaco · 02-01-2006, 02:31 PM

How do I show the picture, not just the link?

wslytoy · 02-01-2006, 02:44 PM

wrap them in the [IMG] tags directly from the site. On Photobucket you've got the option to do the direct link, <IMG> or [IMG]. You want the link that's wrapped like [IMG]http://www.photobucket.com........[IMG]. BTW, looks good!

roktaco · 02-01-2006, 03:12 PM

Maybe like this?

okay got it

Thanks wslytoy

roktaco · 02-01-2006, 04:03 PM

Ok, I'm putting my double cases in from my 2.7, and.... looks like I"m going to have to use the transfer case out of the 2.7 instead of the 3.4,(3.4 has a larger 26 spline than the 2.7 27 spline I think) loosing my push button setup. My speed sensor is in the trans right? I've looked and thats what it looks like. Don't want to loose the speedo and odometer. Anyone see any problems with this setup?

Thanks
Steve

GOT COPE? · 02-01-2006, 06:08 PM

Wow you got some nice toys there.

roktaco · 02-01-2006, 09:34 PM

Thanks, toys are good, just not for the wallet....

pullnshoot25 · 02-01-2006, 11:58 PM

roktaco.... you rock.

roktaco · 02-02-2006, 09:25 AM

Ok, 2.7 case is mated to crawler box, had to switch sensors for 4wd,4 lo, and spedo sesnor simply unbolted from 3.4 tcase and bolted back in place of the mechanical unit on the 2.7 case. Hopefully it will work. Putting on front range crossmember now and will be welding mounts up shortly.....

12-13-2005, 06:12 PM	#1
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	Another DBL cab sas... Started work on it today, 3 link is going to be based on Jake's truck, 37 mtrs everyday, 36 iroks on beadlocks for harder trail runs. TRD s/c with URD's fuel mods, auto with marlin dual cases - stock ratio. Jeep J10 front D44 with flat top knuckles, non trd toy rear, 4.89s in front, 4.88 in back, both air locked, Fox 14" coilovers, 63" 2wd chebbys in the rear, maybe double shackle setup, seriously considering bobbing the bed. Warn 9.5 in front, 1.75" .120 wall bumpers and sliders, safari rack if I bob the bed, Thinking about jeep style swing away tire and gas can carrier behind tailgate... maybe just dreaming. Some pics Attached Thumbnails

12-17-2005, 09:09 PM	#4
Pathtaco Senior Member Join Date: Feb 2005 Location: Socal Posts: 475	I love the double cabs with SAS.... Keep up the good work and take lots of pictures and pos them. FS.. __________________ "Necessity" the mother of all inventions.

01-07-2006, 02:59 PM	#6
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	Moving along slowly.... Little more work done, parts arriving slowly. Had to send my t-case adaptor back to marlin to have it machined for the proper seal, been 4 weeks and counting. Picking up steel for links on monday and dropping off passenger side knuckle to have it machined and tapped for sky arm at same time. Can't mock up suspension until I have final resting place for double cases...... Made suspension tabs today for axle side. Getting anxious. Going slooooow, damn life keeps getting in the way. I'm out of room for pictures, how do I add them full size like you guys do? Attached Thumbnails

02-01-2006, 03:12 PM	#25
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	Maybe like this? okay got it Thanks wslytoy Last edited by roktaco; 02-01-2006 at 03:55 PM.

02-01-2006, 04:03 PM	#26
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	Double case question Ok, I'm putting my double cases in from my 2.7, and.... looks like I"m going to have to use the transfer case out of the 2.7 instead of the 3.4,(3.4 has a larger 26 spline than the 2.7 27 spline I think) loosing my push button setup. My speed sensor is in the trans right? I've looked and thats what it looks like. Don't want to loose the speedo and odometer. Anyone see any problems with this setup? Thanks Steve Last edited by roktaco; 02-01-2006 at 05:21 PM.

12-17-2005, 06:12 PM	#3
clarkrw3 Newbie Join Date: Nov 2005 Posts: 14	sweet keep us updated with lots of pics

01-08-2006, 04:16 PM	#10
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	4.88 isn't available for the d44, so 4.89 was the closest available. Valve body upgrade.... trans will be toast without it. Add it to the list. On the bright side, steering box is up and mounted, frame plated & sleaved on dr side, plated on pass side, made a new front crossmember. Do I need to have a host to show my pictures?

01-08-2006, 07:56 PM	#14
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	Thanks Andy, don't want to bother you so I'll set up a account tommorow to host my pics. I want this this wheeling by Feburary or I'm going to take up ballet. I'll make every effort to keep pics up as I do things. Nothing is new here, just using tried and true designs from members on this board, then add some of my own character to it. Oh yeah, I own a small stereo shop so the inside will be loaded with goodies to

01-11-2006, 05:38 PM	#17
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	Guess I didn't do enough searching, randy's ring & pinion didn't show them at the time. This axle was set up 4 years ago, maybe thats why? Don't know, they work fine. Front range tcase crossmember showed up, nice, ordered bungs for johnny joints from Kar Tech yesterday. Creepin along. Oh yeah, Picked up 3x4 .188 wall steel for 3 link cross member, see if I can get that built tomorrow. Got a photobucket account set up, see if I can put some pictures up.

01-29-2006, 03:59 PM	#19
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	Ok, marlin shipped the modified dual case adaptor finally, should be here monday or tues. I sent it off begining of DEC.... they were backed up big time. This is what I have sitting around waiting to find a home, chevy rears, 8 2.5" johnny joints, bunch of 2" .250 wall tube, new warn 9.5, dana 44 with sky's high steer arms installed (got knuckle back from machine shop wednesday), got my springs on the coilovers. As soon as the adapor is here I'll put it in and then I can locate my front suspension crossmember, oh yeah have the front range crossmember as well, and all the 1.75 x .120 wall tube for bumpers, sliders, etc. Frustrating Steve

02-01-2006, 02:29 PM	#21
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	Some updated pics, putting in crawler box today! Try this photo bucket thing...http://i46.photobucket.com/albums/f1...n/100_0110.jpg http://i46.photobucket.com/albums/f1...n/100_0109.jpg http://i46.photobucket.com/albums/f1...hnnyjoints.jpg http://i46.photobucket.com/albums/f1...n/100_0087.jpg http://i46.photobucket.com/albums/f1...n/100_0086.jpg http://i46.photobucket.com/albums/f1...n/100_0083.jpg http://i46.photobucket.com/albums/f1...n/000_0045.jpg http://i46.photobucket.com/albums/f1...n/000_0044.jpg http://i46.photobucket.com/albums/f1...n/000_0043.jpg

02-01-2006, 02:31 PM	#22
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	try againhttp://i46.photobucket.com/albums/f147/goinmxn/000_0043.jpg

02-01-2006, 02:44 PM	#24
wslytoy I just got laid... off. Join Date: Dec 2004 Location: Madison, Ms Posts: 5,198	wrap them in the [IMG] tags directly from the site. On Photobucket you've got the option to do the direct link, <IMG> or [IMG]. You want the link that's wrapped like [IMG]http://www.photobucket.com........[IMG]. BTW, looks good!

02-01-2006, 09:34 PM	#28
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	Thanks, toys are good, just not for the wallet.... __________________ 04 sas'd dbl cab, daily driven

02-01-2006, 11:58 PM	#29
pullnshoot25 Senior Member Join Date: Aug 2005 Location: Escondido Posts: 219	roktaco.... you rock. __________________ "They that give up essential liberties in order to obtain a little temporary safety deserve neither liberty nor safety" -Benjamin Franklin

02-02-2006, 09:25 AM	#30
roktaco Senior Member Join Date: Dec 2004 Location: Amissville Va Posts: 161	Ok, 2.7 case is mated to crawler box, had to switch sensors for 4wd,4 lo, and spedo sesnor simply unbolted from 3.4 tcase and bolted back in place of the mechanical unit on the 2.7 case. Hopefully it will work. Putting on front range crossmember now and will be welding mounts up shortly..... __________________ 04 sas'd dbl cab, daily driven

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
03 Dbl Cab Axle Leak	derekgaddy	Newbie Tech	9	12-21-2005 06:35 PM
New Dbl Cab Owner	derekgaddy	Tell us who you are	2	11-24-2005 05:33 PM
Floor mats for 06 Tacoma DBL CAB???	97TACOKEL	Interior/Electrical/Electronics	8	10-21-2005 10:06 PM
Looking for a 01-02 Dbl cab....	bamataco	Rigs/Trailers For Sale	4	09-15-2005 11:04 AM
03 Dbl Cab	derekgaddy	Early Tacoma Tech	5	08-18-2005 05:40 PM