possible SC outing

99FlowedTaco · 08-04-2006, 10:58 AM

Hey folks I'm thinking about running out to play a bit at spring creek for my bday if you'd like to go , or have never gone this would be a great time to drop by and wheel your shit for a bit.

I know there are a few new houston members ! Post up and lemme know if you'd like to go! or call me
713-548-7471

Ricks72 · 08-04-2006, 04:21 PM

when is this supposedly taking place? and how is spring creek...

Lazy-Boy · 08-04-2006, 04:24 PM

interested in going but need to weld a front recovery point and recovery gear. maybe next time! check comes in monday so maybe i'll have enough.

thanks,
steve

99FlowedTaco · 08-04-2006, 04:39 PM

Quote:

Originally Posted by Ricks72

when is this supposedly taking place? and how is spring creek...

this trey or brandon asking ?
its not a bad place lots to do, however people trash the place and liter it up.

when ? tomm anytime..

99FlowedTaco · 08-04-2006, 04:41 PM

Quote:

Originally Posted by Lazy-Boy

interested in going but need to weld a front recovery point and recovery gear. maybe next time! check comes in monday so maybe i'll have enough.

thanks,
steve

You dont have the factory front tow hook ? if you got a rear recovery point your good for spring creek. and as far as recovery gear all you really need is a tow strap unless your just out right balls to the wall wheeler and do the insane shit *cough steve *cough (no not you different steve)

you can get by on bald street tires at spring creek but its always good to head out there with at least one other person incase u need a tug

tllstaco · 08-04-2006, 06:57 PM

Mitch,

When were you thinking about going? I can't make it on Saturday, but if things work out I may be able to go on Sunday.

Toby

Cmartinez95 · 08-04-2006, 07:08 PM

Quote:

Originally Posted by 99FlowedTaco

Hey folks I'm thinking about running out to play a bit at spring creek for my bday if you'd like to go , or have never gone this would be a great time to drop by and wheel your shit for a bit.

I know there are a few new houston members ! Post up and lemme know if you'd like to go! or call me
713-548-7471

Can't make it, but Happy BDay anyway, fawker!!!

99FlowedTaco · 08-04-2006, 07:49 PM

Quote:

Originally Posted by tllstaco

Mitch,

When were you thinking about going? I can't make it on Saturday, but if things work out I may be able to go on Sunday.

Toby

hell i will go sunday too ! just down road for me

whenever u want man

TOYFJC · 08-04-2006, 08:43 PM

What time are you thinking (Tomorrow and Sunday)?
I'd really like to check it out. This would be my official
off road break-in for the FJ.

99FlowedTaco · 08-04-2006, 08:52 PM

Quote:

Originally Posted by TOYFJC

What time are you thinking (Tomorrow and Sunday)?
I'd really like to check it out. This would be my official
off road break-in for the FJ.

Give me a call ill be up till midnight
713-548-7471

I was planning on 10-1030am at park

99FlowedTaco · 08-04-2006, 09:06 PM

Ok just got off phone with Lance (ToyFJC)
I'm still planning on going for a bit sat for anyone who wants to show but sunday will be the main day that i will hang out at park all day.

I'm hitting up 4wheelparts tomm AM for a new hilift and mounting rack for it.

drguitarum2005 · 08-05-2006, 12:45 AM

Quote:

Originally Posted by 99FlowedTaco

Ok just got off phone with Lance (ToyFJC)
I'm still planning on going for a bit sat for anyone who wants to show but sunday will be the main day that i will hang out at park all day.

I'm hitting up 4wheelparts tomm AM for a new hilift and mounting rack for it.

<hijack>
where ya mounting it? inside side of bed or what?
</hijack>

i'd like to go but i have a lot of crap to take care of. I am still running 3 mud terrains and 1 all terrain from when i punctured an MT on our last go. Havent been in town to take care of that business yet...oops!

happy bday dude

CUCUY · 08-05-2006, 02:54 AM

Quote:

Originally Posted by 99FlowedTaco

Ok just got off phone with Lance (ToyFJC)
I'm still planning on going for a bit sat for anyone who wants to show but sunday will be the main day that i will hang out at park all day.

I'm hitting up 4wheelparts tomm AM for a new hilift and mounting rack for it.

i'll swing out there sunday. what time will you be out there and how will i reconize you?

99FlowedTaco · 08-05-2006, 08:22 AM

Quote:

Originally Posted by CUCUY

i'll swing out there sunday. what time will you be out there and how will i reconize you?

i will be out there at 10am

so far there will be toby, lance, and myself and you

so look for 2 tacomas and an fjcruiser got a CB ? if so tune to channel 4 and give us a shout. or buzz my cell 713-548-7471

this is my junk

Interex · 08-05-2006, 09:26 AM

Got to work and take care of the GF, but Happy B-day dude!!!

Ricks72 · 08-05-2006, 10:56 AM

I just remembered I'm running the spare tire conversion on my taco right now. I need to get some new tires before next weekend...i guess I'm out

99FlowedTaco · 08-05-2006, 01:10 PM

Quote:

Originally Posted by drguitarum2005

<hijack>
where ya mounting it? inside side of bed or what?
</hijack>

i'd like to go but i have a lot of crap to take care of. I am still running 3 mud terrains and 1 all terrain from when i punctured an MT on our last go. Havent been in town to take care of that business yet...oops!

happy bday dude

4wheelbitches didnt have the one i wanted but they have a rack mount that bolts to side of bedrail and locks hi-lift in place.

LAW · 08-05-2006, 03:52 PM

Quote:

Originally Posted by 99FlowedTaco

4wheelbitches didnt have the one i wanted but they have a rack mount that bolts to side of bedrail and locks hi-lift in place.

northern tool?

99FlowedTaco · 08-05-2006, 04:05 PM

i would lindsay but they are a bit more there ! for what i'd pay for a cast/steel one at NT i can get an all cast one at 4wp

tllstaco · 08-05-2006, 04:55 PM

Mitch,

Something came up. I won't be there tomorrow.

Toby

59apache · 08-05-2006, 08:24 PM

tractor supply for the hi lift they have a ag lift for 30 bucks.

Justin

Lazy-Boy · 08-05-2006, 09:50 PM

99flowed: it's a 81 so it's basically sheet metal up front. i'm going to the steel scrap yard on monday so hopefully i can find some tube for the bender, if not i'll just weld up a front reciever. i'll try to make it out soon. i'm on 35" m/t's but i lack experience so i'd want to head up there with a group a couple of times before i can go solo.

btw, happy bday.

-steve

99FlowedTaco · 08-05-2006, 09:55 PM

Quote:

Originally Posted by Lazy-Boy

99flowed: it's a 81 so it's basically sheet metal up front. i'm going to the steel scrap yard on monday so hopefully i can find some tube for the bender, if not i'll just weld up a front reciever. i'll try to make it out soon. i'm on 35" m/t's but i lack experience so i'd want to head up there with a group a couple of times before i can go solo.

btw, happy bday.

-steve

thx and regardless of experience its always best to go with at least one person no matter where u wheel.

CUCUY · 08-05-2006, 11:59 PM

supposed to rain pretty bad tonight....still on for the outing or postponed?

LAW · 08-06-2006, 12:01 AM

Quote:

Originally Posted by CUCUY

supposed to rain pretty bad tonight....still on for the outing or postponed?

usually after a good rain, it turns into a complete mudfest

CUCUY · 08-06-2006, 12:21 AM

Quote:

Originally Posted by law116

usually after a good rain, it turns into a complete mudfest

lol.....don't know if i'm ready to handle that....lol

still learning the limits of my truck and how to wheel it

besides, i don't even have a winch if i get stuck in some serious slop lol

drguitarum2005 · 08-06-2006, 12:45 AM

Quote:

Originally Posted by CUCUY

lol.....don't know if i'm ready to handle that....lol

still learning the limits of my truck and how to wheel it

besides, i don't even have a winch if i get stuck in some serious slop lol

thats what i thought but it really isnt near as hard as youre thinking. if you get stuck, these guys WILL get you out. no ones going to just leave you stuck. wheel on!

swank501 · 08-06-2006, 01:08 AM

SC may be a little red, but they will take care of you as long as you're not a dick or a yuppy with an attitude. The owner let me leave my junk there(supervised) overnight when I flopped it and let me borrow his trailer to bring her home. heck, he even came out there to help when we were stuck

CUCUY · 08-06-2006, 01:13 AM

hmmm.......sounds good then.

where do i go exactly to meet the guys when i get there?

damn, how do i get there, never been before. directions coming from beltway8 and 45 please.

swank501 · 08-06-2006, 01:37 AM

from 45 north bound........take the 2920/old town spring exit..............turn right at the light...............keep left when you come to a fork...............come to a stop sign, keep straight and follow the road around.you will cross a couple sets of train tracks within less than a mile. When You cross(i think) the 3rd set you will take a left on the street (hardy rd) directly after you cross the last set of Train tracks. Keep going until you see a sign on your right that says Spring Creek Offroad park. that's it

08-04-2006, 10:58 AM	#1
99FlowedTaco Shrockworks 4x4 Products Join Date: Dec 2004 Location: Houston, Texas Posts: 4,468	possible SC outing Hey folks I'm thinking about running out to play a bit at spring creek for my bday if you'd like to go , or have never gone this would be a great time to drop by and wheel your shit for a bit. I know there are a few new houston members ! Post up and lemme know if you'd like to go! or call me 713-548-7471 __________________ Mitch 2002 4Runner SR5 - DD http://www.shrockworks.com Got questions on a product we sell , please PM any questions.

08-04-2006, 04:21 PM	#2
Ricks72 Playing with radiation Join Date: Dec 2004 Location: Beaumont, TX Posts: 3,326	when is this supposedly taking place? and how is spring creek... __________________ -Brandon Formula Toy #36

08-04-2006, 04:24 PM	#3
Lazy-Boy Senior Member Join Date: May 2006 Location: Houston, Tx Posts: 283	interested in going but need to weld a front recovery point and recovery gear. maybe next time! check comes in monday so maybe i'll have enough. thanks, steve Last edited by Lazy-Boy; 08-04-2006 at 04:31 PM.

08-04-2006, 09:06 PM	#11
99FlowedTaco Shrockworks 4x4 Products Join Date: Dec 2004 Location: Houston, Texas Posts: 4,468	Ok just got off phone with Lance (ToyFJC) I'm still planning on going for a bit sat for anyone who wants to show but sunday will be the main day that i will hang out at park all day. I'm hitting up 4wheelparts tomm AM for a new hilift and mounting rack for it. __________________ Mitch 2002 4Runner SR5 - DD http://www.shrockworks.com Got questions on a product we sell , please PM any questions.

08-05-2006, 09:26 AM	#15
Interex Veteran Member Join Date: May 2005 Location: Plano, TX Posts: 5,462	Got to work and take care of the GF, but Happy B-day dude!!! __________________ Harold '07 Tundra Double Cab Limited 5.7L '99 Tacoma Ext. Cab V6 non-TRD - Converted PreRunner -> 4X4 '94 Toyota Supra Turbo PT76-GTS, Auto->6 speed '87 Toyota Supra Turbo 4X4 Conversion Thread

08-04-2006, 06:57 PM	#6
tllstaco Senior Member Join Date: Dec 2004 Location: Pearland, TX Posts: 235	Mitch, When were you thinking about going? I can't make it on Saturday, but if things work out I may be able to go on Sunday. Toby

08-04-2006, 08:43 PM	#9
TOYFJC Newbie Join Date: Jul 2006 Location: Houston Posts: 12	What time are you thinking (Tomorrow and Sunday)? I'd really like to check it out. This would be my official off road break-in for the FJ.

08-05-2006, 10:56 AM	#16
Ricks72 Playing with radiation Join Date: Dec 2004 Location: Beaumont, TX Posts: 3,326	I just remembered I'm running the spare tire conversion on my taco right now. I need to get some new tires before next weekend...i guess I'm out __________________ -Brandon Formula Toy #36

08-05-2006, 04:05 PM	#19
99FlowedTaco Shrockworks 4x4 Products Join Date: Dec 2004 Location: Houston, Texas Posts: 4,468	i would lindsay but they are a bit more there ! for what i'd pay for a cast/steel one at NT i can get an all cast one at 4wp __________________ Mitch 2002 4Runner SR5 - DD http://www.shrockworks.com Got questions on a product we sell , please PM any questions.

08-05-2006, 04:55 PM	#20
tllstaco Senior Member Join Date: Dec 2004 Location: Pearland, TX Posts: 235	Mitch, Something came up. I won't be there tomorrow. Toby

08-05-2006, 08:24 PM	#21
59apache Senior Member Join Date: Feb 2006 Location: North Houston, Tx Posts: 160	tractor supply for the hi lift they have a ag lift for 30 bucks. Justin __________________ 06 DC TUNDRA 4x4 3" Toytec Spacer 1.5" Alcan AAL

08-05-2006, 09:50 PM	#22
Lazy-Boy Senior Member Join Date: May 2006 Location: Houston, Tx Posts: 283	99flowed: it's a 81 so it's basically sheet metal up front. i'm going to the steel scrap yard on monday so hopefully i can find some tube for the bender, if not i'll just weld up a front reciever. i'll try to make it out soon. i'm on 35" m/t's but i lack experience so i'd want to head up there with a group a couple of times before i can go solo. btw, happy bday. -steve

08-06-2006, 01:08 AM	#28
swank501 Thank God 4 Every Day Join Date: Aug 2005 Location: woodlands texas Posts: 1,740	SC may be a little red, but they will take care of you as long as you're not a dick or a yuppy with an attitude. The owner let me leave my junk there(supervised) overnight when I flopped it and let me borrow his trailer to bring her home. heck, he even came out there to help when we were stuck __________________ gone to see the world...........

08-06-2006, 01:37 AM	#30
swank501 Thank God 4 Every Day Join Date: Aug 2005 Location: woodlands texas Posts: 1,740	from 45 north bound........take the 2920/old town spring exit..............turn right at the light...............keep left when you come to a fork...............come to a stop sign, keep straight and follow the road around.you will cross a couple sets of train tracks within less than a mile. When You cross(i think) the 3rd set you will take a left on the street (hardy rd) directly after you cross the last set of Train tracks. Keep going until you see a sign on your right that says Spring Creek Offroad park. that's it __________________ gone to see the world...........

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Couple of new pictures from Barstow outing...	Juicy Jaos	Desert Wheelin' and Racing	24	05-19-2006 06:23 PM