![]() ![]() ![]() |
|
|
|||||||
|
Welcome to the TTORA Forum forums. You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact contact us. ATTENTION: In an on-going effort to keep this forum spam free, the Forum Admin approves every new account before giving any posting rights to new users. Accounts are normally approved within 24 hours. Sorry for any inconvenience, but verification of every new account is what will continue to keep this forum spam free. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
#1 | |
|
EL PRESIDENTE
![]() |
im seriously going to kill the next person that pulls out in front of me. this is rediculous. I was driving to class this morning, and some lady decides i dont exists, and tries to cross the road, i slammed on the brakes, locked em up agaain, and swerved to the left, i caught her drivers side front quarter and and her bumper. i hit her with my passengers side front again(yes the side that just got fixed). i ripped off her entire front end pretty much, my bumper looks like its slightly bent in, and the paint is scratched to hell. the sidewall for my tire was ripped so now im looking for a new tire. the only damage was the busted corner light again, and some of my quarter panel got dented and scratched. but if it wasnt for the all pro my truck probably would have been totaled or close to it. so heres props for a good product from allpro. to bad it couldnt have been tested on the trail instead though. ill post some pics up when i get a chance.
__________________
Quote:
'99 Taco. 3.4L v6 5spd. 4x4 SAW 2.0 Deaver 3 leaf add pack w/Bilstein 5125s 4.88s and ARBs front and rear 33x12.50R15" Hankook Dynapro M/T MIOR sliders all-pro bumper and skids Marlin Crawler rear bumper Smittybuilt 10k Winch with in cab controls My Pics |
|
|
|
|
|
|
#2 |
|
"Terry Tate"
![]() Join Date: Dec 2004
Location: Duluth, GA
Posts: 3,297
|
dude, that just sucks! I hate it for ya, man. atleast you are alright, though. sounds like a relatively easy fix, though, maybe. the bumper can probably be adjusted, too. get the insurance money and buy some gears and lockers! or, you may just need to buy a tank, man!
|
|
|
|
|
|
#3 |
|
Veteran Member
![]() |
im feelin exo cage now. put one of them on there and you should be safe.
|
|
|
|
|
|
#4 |
|
Member
Join Date: Oct 2005
Location: Albuquerque, New Mexico
Posts: 49
|
I had the similar thing happen to me the other day!
The dumb lady said she was dodging a "rabbit" almost rolled it when i swerved.. got 2k check for some scratched paint and fender on my driver side.. just ordered some arb lockers with the check i recived!!
Last edited by ATLRoach; 10-05-2006 at 10:46 AM. Reason: Colorful words |
|
|
|
|
|
#5 |
|
The Satanic Panic
![]() |
damn that sucks man at least no one was hurt
__________________
i have too many damn car projects 99 x cab SOLD 02 trans am ws6 1953 bel air rat rod 1950 chevy 3800 |
|
|
|
|
|
#6 |
|
Veteran Member
Join Date: Sep 2005
Location: Woodstock
Posts: 1,932
|
Good lord greg, people just dont see your truck comming at all. Good to hear you are alright and the truck is still driving minus that tire. Did the B**** get a ticket?
__________________
Current: 00' 4runner Limited - OME 4" - ARB Front - PIAAs - 33s... Daily: 01 Z71.. Exhaust, Intake, Tint, Bedliner. Previous: 03 Tundra, FZJ80, Built 83 Exo'd on 36s, 99 TRD Taco SAWs ARB'd, 87 4runner 35s w/ body lift Www.sunbeltmachinery.com Fab guys need Fab machinery? PM me. . |
|
|
|
|
|
#7 |
|
Veteran Member
Join Date: Jun 2005
Location: Villa Rica
Posts: 591
|
i think you should take the insurance money and paint the truck neon green, they'll see ya then.
__________________
1997 4Runner 4x4....DDer. 1994 Toyota: SAS, 5.29s, LONGS, Lockrights fr/rr, 5" of lift, 35" MTRs, 20lb CO2, Homemade Front/Rear Bumpers, Marlin 4.7s, and ram assist steering........SOLD Last edited by ratherBwheel'n; 10-05-2006 at 11:00 AM. |
|
|
|
|
|
#8 |
|
Winder licker
![]() |
that or safety orange!
__________________
Kyle 03 Tundra - SAWs, Wheelers AAL, BILs, 295s on FJ80 wheels |
|
|
|
|
|
#9 | |
|
EL PRESIDENTE
![]() |
im not sure if she got a ticket or not, but here are some pics
__________________
Quote:
'99 Taco. 3.4L v6 5spd. 4x4 SAW 2.0 Deaver 3 leaf add pack w/Bilstein 5125s 4.88s and ARBs front and rear 33x12.50R15" Hankook Dynapro M/T MIOR sliders all-pro bumper and skids Marlin Crawler rear bumper Smittybuilt 10k Winch with in cab controls My Pics |
|
|
|
|
|
|
#10 | |
|
EL PRESIDENTE
![]() |
im gonna try to get some money for the bumper, and just repaint it and use the money for other things...
__________________
Quote:
'99 Taco. 3.4L v6 5spd. 4x4 SAW 2.0 Deaver 3 leaf add pack w/Bilstein 5125s 4.88s and ARBs front and rear 33x12.50R15" Hankook Dynapro M/T MIOR sliders all-pro bumper and skids Marlin Crawler rear bumper Smittybuilt 10k Winch with in cab controls My Pics |
|
|
|
|
|
|
#11 |
|
Senior Member
Join Date: Jul 2005
Posts: 178
|
How dare you do that to my tires!
__________________
83 pickup 5.29/Aussie/Spool RUF/F150 rears 86" rear housing 40" LTBs Custom fuel cell and flatbed 4.3 Vortec swap in the works |
|
|
|
|
|
#12 | ||
|
EL PRESIDENTE
![]() |
Quote:
well ill still have 3 of em left. im getting two new tires tomarro, and putting them up front and the drivers side front will be my new spare
__________________
Quote:
'99 Taco. 3.4L v6 5spd. 4x4 SAW 2.0 Deaver 3 leaf add pack w/Bilstein 5125s 4.88s and ARBs front and rear 33x12.50R15" Hankook Dynapro M/T MIOR sliders all-pro bumper and skids Marlin Crawler rear bumper Smittybuilt 10k Winch with in cab controls My Pics |
||
|
|
|
|
|
#13 |
|
"Terry Tate"
![]() Join Date: Dec 2004
Location: Duluth, GA
Posts: 3,297
|
heck, yeah. get the money for a brand new Toyota bumper and new tires, corner light, and whatever else is broken.
|
|
|
|
|
|
#14 | |
|
EL PRESIDENTE
![]() |
yeah i just have to figure out how to get the money without taking to a shop. really the only thing i need fixed is the corner light. i may be able to take the dent out of the quarter panel but its not that big anyways.
__________________
Quote:
'99 Taco. 3.4L v6 5spd. 4x4 SAW 2.0 Deaver 3 leaf add pack w/Bilstein 5125s 4.88s and ARBs front and rear 33x12.50R15" Hankook Dynapro M/T MIOR sliders all-pro bumper and skids Marlin Crawler rear bumper Smittybuilt 10k Winch with in cab controls My Pics |
|
|
|
|
|
|
#15 |
|
Winder licker
![]() |
Greg go get some quotes and have the insurance cut you a check.
__________________
Kyle 03 Tundra - SAWs, Wheelers AAL, BILs, 295s on FJ80 wheels |
|
|
|
|
|
#16 | |
|
"Terry Tate"
![]() Join Date: Dec 2004
Location: Duluth, GA
Posts: 3,297
|
Quote:
|
|
|
|
|
|
|
#17 |
|
Veteran Member
|
I'll trade you my stock bumper for your POS bent one...
__________________
R.I.P "Dimebag" Darrell Abbott 2000 Xtra Cab V6 4x4 TRD 5spd SAW 2.0 32x11.50 BFG Mud Terrains All Pro HD Sliders Homemade rear bumper PANTERA stickers
Last edited by Wiskey_33; 10-05-2006 at 01:33 PM. |
|
|
|
|
|
#18 |
|
Veteran Member
Join Date: Sep 2005
Location: Woodstock, GA
Posts: 1,010
|
Goodness, man, what the heck is your problem?!
Well, let's just hope you don't have to get that bumper off of there, because you will need about a 1 1/2 inch drill bit to drill out the weld we put on there! Glad no one was injured and the damage is minimal, anyways! |
|
|
|
|
|
#19 | ||
|
EL PRESIDENTE
![]() |
Quote:
yeah ill have to get some quotes when i find time. yeah i was thinking about about that weld, theres no way that bumper is coming off
__________________
Quote:
'99 Taco. 3.4L v6 5spd. 4x4 SAW 2.0 Deaver 3 leaf add pack w/Bilstein 5125s 4.88s and ARBs front and rear 33x12.50R15" Hankook Dynapro M/T MIOR sliders all-pro bumper and skids Marlin Crawler rear bumper Smittybuilt 10k Winch with in cab controls My Pics |
||
|
|
|
|
|
#20 |
|
Veteran Member
Join Date: Sep 2005
Location: Woodstock
Posts: 1,932
|
Alan if you have a ding king... bring it to chris's house... Please.
__________________
Current: 00' 4runner Limited - OME 4" - ARB Front - PIAAs - 33s... Daily: 01 Z71.. Exhaust, Intake, Tint, Bedliner. Previous: 03 Tundra, FZJ80, Built 83 Exo'd on 36s, 99 TRD Taco SAWs ARB'd, 87 4runner 35s w/ body lift Www.sunbeltmachinery.com Fab guys need Fab machinery? PM me. . |
|
|
|
|
|
#21 |
|
Veteran Member
![]() |
man, that bumper did take a beating. who would of thought those wings on the side would work so great.
__________________
2001 Extra Cab TRD 2.7L 5spd |
|
|
|
|
|
#22 |
|
Veteran Member
|
its a part of life in the big shitty.
So, keep your radar on scan, keep your insurance paid up!
Last edited by misterzee; 10-05-2006 at 06:55 PM. |
|
|
|
|
|
#23 | ||
|
EL PRESIDENTE
![]() |
Quote:
lol no kidding. i got 2 new tires today so my truck is fine, except a lil paint, and the corner light is missing...
__________________
Quote:
'99 Taco. 3.4L v6 5spd. 4x4 SAW 2.0 Deaver 3 leaf add pack w/Bilstein 5125s 4.88s and ARBs front and rear 33x12.50R15" Hankook Dynapro M/T MIOR sliders all-pro bumper and skids Marlin Crawler rear bumper Smittybuilt 10k Winch with in cab controls My Pics |
||
|
|
|
|
|
#24 |
|
Part-timer
Join Date: Sep 2005
Posts: 1,117
|
That suck! Wow, that all pro bumper took that hit well.
__________________
1991 Acura NSX 2006 Toyota 4Runner Sport 4x4 2010 Toyota Sequoia Platinum |
|
|
|
|
|
#25 | |
|
EL PRESIDENTE
![]() |
so i got an estimate today and it looks like ill be getting a check for $1,313 in the mail
. they guy that gave me the estimate was freakin awesome. he said that they should just fix the bumper, but he said that he would just go ahead and give me the full price for a new bumper $$$. since i got the bumper on sale for 530, and its now back at reg price($599) ill be getting some extra money there too. $415 of it is going to go to rembursing me for the new tires, and the rest is for goodies!!, the only thing im going to fix is the corner light. so hmmm that leaves me with about $700 for fun stuff!!!hmmm what to buy?, what to buy?
__________________
Quote:
'99 Taco. 3.4L v6 5spd. 4x4 SAW 2.0 Deaver 3 leaf add pack w/Bilstein 5125s 4.88s and ARBs front and rear 33x12.50R15" Hankook Dynapro M/T MIOR sliders all-pro bumper and skids Marlin Crawler rear bumper Smittybuilt 10k Winch with in cab controls My Pics |
|
|
|
|
|
|
#26 |
|
Veteran Member
Join Date: Sep 2005
Location: Woodstock
Posts: 1,932
|
I really hate you right now....
__________________
Current: 00' 4runner Limited - OME 4" - ARB Front - PIAAs - 33s... Daily: 01 Z71.. Exhaust, Intake, Tint, Bedliner. Previous: 03 Tundra, FZJ80, Built 83 Exo'd on 36s, 99 TRD Taco SAWs ARB'd, 87 4runner 35s w/ body lift Www.sunbeltmachinery.com Fab guys need Fab machinery? PM me. . |
|
|
|
|
|
#27 |
|
Senior Member
Join Date: Sep 2005
Location: Athens, GA
Posts: 425
|
You want to borrow my truck and drive it around for like a week? I need someone to hit it so I can finish my regear.
__________________
2000 Tacoma V6 4X4 5spd: All-Pro coilovers & upper a arms, 1" diff drop, All-Pro rear 3" springs, inverted 10" Bilstein 5100s, All-Pro sliders, ARB Bullbar w/ Tabor 9k winch, Front Range Rear Bumper, 33x10.50 BFG Mud Terrains |
|
|
|
|
|
#28 | |
|
"Terry Tate"
![]() Join Date: Dec 2004
Location: Duluth, GA
Posts: 3,297
|
Quote:
|
|
|
|
|
|
|
#29 |
|
Part-timer
Join Date: Sep 2005
Posts: 1,117
|
I've got the front if you can get a rear to match 4.88 gears.
__________________
1991 Acura NSX 2006 Toyota 4Runner Sport 4x4 2010 Toyota Sequoia Platinum |
|
|
|
|
|
#30 | |
|
EL PRESIDENTE
![]() |
i would get a locker for the front as well, but if i locked the front i would want an arb since im still ifs. i have a feeling that an auto locker would destroy my cvs. the angle is already kinda bad.
__________________
Quote:
'99 Taco. 3.4L v6 5spd. 4x4 SAW 2.0 Deaver 3 leaf add pack w/Bilstein 5125s 4.88s and ARBs front and rear 33x12.50R15" Hankook Dynapro M/T MIOR sliders all-pro bumper and skids Marlin Crawler rear bumper Smittybuilt 10k Winch with in cab controls My Pics |
|
|
|
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cow mountain...1st time FUN AS HELL | Supramann93 | Lets Talk About Wheelin! | 25 | 08-12-2006 11:21 PM |
| Photo Help | jbanders | Early Tacoma Tech | 4 | 07-23-2006 05:59 PM |
| wreck? | pimptoy | Off Topic | 20 | 05-18-2006 06:37 PM |
| Car Accident, I'm getting Screwed? | GreenTaco | Off Topic | 25 | 02-02-2006 01:16 AM |
| Bad trail wreck in Fl | Nullifier | Lets Talk About Wheelin! | 3 | 06-14-2005 11:32 AM |