"power" options on non "power" truck?

slim99 · 08-26-2007, 02:41 PM

my truck did not come with any power options, I have found a next to identical truck mine is 99, this is 00, it came with all power options. I can get the majority, if not all of the wiring from this truck for the power windows and all power door locks, includeing keyless entry remote. I would basicly get the entire drive and pass doors (dented and scratch in wreck, no internal damage). Gut them and my current, put the power stuff in my current and then wire it up. I have pretty good knowledge of wirring but am not very familar with toyota's. how hard would it be to install the power windows? what about door locks? where could I find wiring diagrams?

Thanks

mrbigbri · 08-26-2007, 04:10 PM

Quote:

how hard would it be to install the power windows? what about door locks?

From what I understand, it's all plug and play. The doors have their own harnesses that plug into empty sockets in your kick panels. I wish I could come across a wrecked 95-97 grey-interiored wreck that I could get all the parts from, including the door panels... but they are getting really hard to find in mint condition.

Brian

jessevic · 08-26-2007, 06:03 PM

power locks are easy. I put in a car alarm, and for an extra $50 they put in lock actuators that gave me power locks.

slim99 · 08-26-2007, 06:45 PM

Quote:

Originally Posted by jessevic

power locks are easy. I put in a car alarm, and for an extra $50 they put in lock actuators that gave me power locks.

It's my understanding that the power locks are factory and keyless entry remote also. IDK where the sensor for the remote is or what I would need to get from the donor to make it work. Is it all contained in the door also? Is there receiving unit and wiring for keyless entry all "plug-n-play" also?

98TOY · 08-26-2007, 08:31 PM

Quote:

Originally Posted by mrbigbri

From what I understand, it's all plug and play. The doors have their own harnesses that plug into empty sockets in your kick panels. I wish I could come across a wrecked 95-97 grey-interiored wreck that I could get all the parts from, including the door panels... but they are getting really hard to find in mint condition.

Brian

I have a set of '04 door panels you may be interested in? http://www.customtacos.com/forum/showthread.php?t=71873

I believe they fit from '98-04? You'll need to double check. I bought them for my '98 but haven't redone my interior and probably never will... New baby on the way.

PM if interested.

james4x4 · 08-27-2007, 08:10 AM

how much are you asking? they might fit my 98?

98TOY · 08-27-2007, 09:17 AM

Quote:

Originally Posted by james4x4

how much are you asking? they might fit my 98?

$150 + Shipping.

Panels are in fantastic shape. Follow the above link for pictures.

slim99 · 08-28-2007, 12:06 PM

does anybody have a photo of the exact location of the "relay" i need from the donor truck to make the power windows and door locks work. there was multiple relays under the kick panel on each side of the donor vehicle and the guy is using all the wiring and wouldn't give me any of them unless I could prove which was the power windows/locks relay.
Thanks

slim99 · 08-28-2007, 12:45 PM

Quote:

Originally Posted by slim99

does anybody have a photo of the exact location of the "relay" i need from the donor truck to make the power windows and door locks work. there was multiple relays under the kick panel on each side of the donor vehicle and the guy is using all the wiring and wouldn't give me any of them unless I could prove which was the power windows/locks relay.
Thanks

Is this the right plug????????

08-26-2007, 02:41 PM	#1
slim99 Senior Member Join Date: Jun 2007 Location: NC Posts: 216	"power" options on non "power" truck? my truck did not come with any power options, I have found a next to identical truck mine is 99, this is 00, it came with all power options. I can get the majority, if not all of the wiring from this truck for the power windows and all power door locks, includeing keyless entry remote. I would basicly get the entire drive and pass doors (dented and scratch in wreck, no internal damage). Gut them and my current, put the power stuff in my current and then wire it up. I have pretty good knowledge of wirring but am not very familar with toyota's. how hard would it be to install the power windows? what about door locks? where could I find wiring diagrams? Thanks

08-26-2007, 06:03 PM	#3
jessevic Veteran Member Join Date: Jan 2005 Location: BC Canada Posts: 1,336	power locks are easy. I put in a car alarm, and for an extra $50 they put in lock actuators that gave me power locks. __________________ Current 2004 V6 Extended Cab Auto Sold and Missed 2008 V6 Extended Cab 6-SPD 2003 V6 Extended Cab 5-SPD Custom stereo and hidden 10" sub

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
16" "wagon style" Toyota truck wheels!!!	MINI2NUT	Parts/Electronics/Wheels & Tires For Sale	8	02-11-2007 10:50 AM
After a 6" Suspension life and 3" body, what are my options to	Outlanbfd	Suspension	71	12-11-2006 01:47 PM
WTB: 05/06 Tacoma badges "SR5", "V6", and "PreRunner"	Matt151B	Wanted	7	06-18-2006 12:06 PM
3rd gen 4-runner 5" or 6" lift options	96 runner	Pickup/4Runner Tech	34	05-13-2006 04:17 PM
58 "known" and 188 "reasonably anticipated" cancer-causing substances	PRB_Ohio	Off Topic	0	01-31-2005 08:07 PM

08-27-2007, 08:10 AM	#6
james4x4 Member Join Date: Aug 2007 Location: corpus christi, tx Posts: 93	how much are you asking? they might fit my 98?

08-28-2007, 12:06 PM	#8
slim99 Senior Member Join Date: Jun 2007 Location: NC Posts: 216	does anybody have a photo of the exact location of the "relay" i need from the donor truck to make the power windows and door locks work. there was multiple relays under the kick panel on each side of the donor vehicle and the guy is using all the wiring and wouldn't give me any of them unless I could prove which was the power windows/locks relay. Thanks