CB Mounting Solutions
From Faq
1995.5 to 2004 Tacomas have very little space to add peripheral electronics. Below you will find many different brands of CB's and information on how they were mounted.
Below are 2 images of the receiver for the Cobra WX 75 ST. It can be mounted under the center console, it also comes with hardware to mount the CB output.
Below is an image of an ashtray-mounted Uniden CB:
You can mount the CB flush in the ash tray location by heating the airduct with a heat gun and pressing in the area where th 90* coax elbow will go with the handle of a screwdriver about 1/4 inch in. (about 30 sec with the heat gun and about 20 sec for it to cool)
Below are a couple of images of an in-dash mounted Cobra 29 WX NW ST. Check out the cool night pic!
Cobra 29 WX NW ST at night
Below is an image of a Radio Shack CB mounted in the DIN slot.
Radio Shack CB in DIN slot
Here are some member write ups for CB Radio installations:
05 Tacoma Cobra 75 WXST Install Automatic Transmission
05 Tacoma Cobra 75 WXST Install Manual Transmission
FJ Race Radio Install
Back to Tacoma Modification Articles
Back to the Main Page
