Rig dimensions thread - TTORA Forum
 
LinkBack Thread Tools Display Modes
post #1 of 15 (permalink) Old 12-20-2009, 02:55 PM Thread Starter
Veteran Member
 
Volcom's Avatar
 
Join Date: Jan 2007
Location: Pueblo, Colorado
Posts: 1,500
Rig dimensions thread

1984 4Runner
Trail Gear 4" springs F&R
Close to 5" of total lift
Old school All-Pro crossmember
109" wheelbase

Extra weight on the truck
Full cage, front bumper, hard top

35" Generic All terrains
33 15/16" tall at 30 psi
26" frame height
??? belly height
11" rear diff clearance
11 3/8" front diff clearance
3815 lbs (1/4 tank of fuel, hardtop, 35's)

39.5" Iroks
I'll measure it up when I swap the big tires back on.

Addicted Off Road

Quote:
Originally Posted by DIRTCO
If you build an F-Toy it better be the Toyota motor home class, because your going to be living in it! Your wife would kill you if took on that big of a project!
Quote:
Originally Posted by poorboyota26
Yeah it needs more troyangulation

Last edited by Volcom; 12-23-2009 at 09:16 PM. Reason: Added weight
Volcom is offline  
Sponsored Links
Advertisement
 
post #2 of 15 (permalink) Old 12-20-2009, 08:08 PM
Veteran Member
 
RedRunnertc's Avatar
 
Join Date: Dec 2005
Location: Houston, TX
Posts: 15,034
1993 4Runner
Front suspension - balljoint spacers, no tbar crank
Custom triangulated 4 link rear w/ TrailGear housing
Budbuilt skids and crossmember
Full armor - TONS of weight
33x10.50 KM2 - actual height 32"

Frame: 21"
Lowest point crossmember: 17.25"
Front xmember/skid: 13-3/4"
Rear diff: 10.5" (13.75" under the axle tubes)

Former President - CO Chapter
Founding President - OH Chapter

'93 4Runner lockers, armor, tcases, & stuff

'14 Cadillac CTS VSport

Check out pix at www.4wheelingoh.shutterfly.com/action

Last edited by RedRunnertc; 03-07-2010 at 06:59 PM.
RedRunnertc is offline  
post #3 of 15 (permalink) Old 12-20-2009, 08:20 PM
ike
Veteran Member
 
ike's Avatar
 
Join Date: Sep 2006
Location: Loveland CO
Posts: 20,355
Troy, you should measure the actual tire hight as well. this will allow fair comparisons taking into acout changes in height due to tire size, wear and pressure.




Degenerate

I am not lost


98 mazda protege
99 v6 trd taco-some stuff
07 Ninja 650R
ike is offline  
 
post #4 of 15 (permalink) Old 12-20-2009, 10:01 PM
Veteran Member
 
Join Date: Dec 2006
Posts: 2,453
1987 4runner
Flat Belly
3 Link rear, stock front
Worn 35" BFG Mud terrains: True Diameter= Check on that.

Clearance numbers:

19 3/4" to the lowest point of the belly pan. 20" at highest.

Frame is 20 front-21" back (slopes up and to the back).

Front xmember/skid: 12"

Rear diff: 11 3/4"

Baby Beast- Mini Truck in progress

Generation Dead
AxleIke is offline  
post #5 of 15 (permalink) Old 12-20-2009, 11:13 PM
Veteran Member
 
00regcab's Avatar
 
Join Date: Aug 2007
Location: Brighton, Co
Posts: 7,910
Send a message via AIM to 00regcab
I'll measure my mutt of a truck tomorrow at work and update this post with the details. Will have to update in a couple of weeks when I go to the Q78's. All I have for those currently, is @ 25psi they measure EXACTLY 35" tall.

00 Regular Cab Frame/running gear
OME Shocks/882 coils up front
OME Dakar springs out back
All pro skids

Front x-member -- 14 1/4"
Center x-member -- 17"
Rear Diff -- 10 3/4"
BALD 255/85/16 KM2's actual height @ 32psi -- 32.5"

Front x-member -- 15 1/2"
Center x-member -- 18 1/4"
Rear Diff -- 12" (unshaved diff, drain plug still in the bottom)
Q78-16 Bias ply TSL's actual height @ 35psi -- 35"

Last edited by 00regcab; 02-22-2010 at 07:20 PM.
00regcab is offline  
post #6 of 15 (permalink) Old 12-21-2009, 10:37 AM
In Rememberance
 
Lysmachia's Avatar
 
Join Date: Sep 2005
Location: Clear Lake City, TX
Posts: 13,296
Send a message via AIM to Lysmachia Send a message via MSN to Lysmachia Send a message via Yahoo to Lysmachia Send a message via Skype™ to Lysmachia
You guys want me to sticky this thread?

Also add your vehicle weight if you know it.




Molly
aka Lysmachia
85 4 Runner SAS (Tippy II) - All mashed together in 93runner and 85runner Goodness

Get your 4x4 VIDEO pr0n here
Quote:
Originally Posted by mrdoug View Post
How many people do you think it'd take to hold Molly down while we cut off a limb? I'm guessing alot, plus ratchet straps, c-clamps, and other misc tools
Lysmachia is offline  
post #7 of 15 (permalink) Old 02-22-2010, 07:08 PM
Veteran Member
 
00regcab's Avatar
 
Join Date: Aug 2007
Location: Brighton, Co
Posts: 7,910
Send a message via AIM to 00regcab
bump, updated.
00regcab is offline  
post #8 of 15 (permalink) Old 02-22-2010, 07:38 PM
Veteran Member
 
Mythica's Avatar
 
Join Date: Sep 2005
Location: Colorado Springs
Posts: 1,676
98 Ext cab taco
4" lift alcans outback, 14" shocks
Radius arm, 12" dual rate CO's 150lbs over 225lbs upfront
126" wheel base

extra weight???? lol
9"
d44
sliders
frame plating
spare 37
ha
compresor


37" Iroks
36.5" tall at 30 psi 28psi outback
25.5" frame height
23.5" belly height
12" rear diff clearance
12" front diff clearance
5540 lbs full tank and me

Jerry

'98 Tacoma TRD

......I see a dark sail on the horizon, set under a black cloud that hides the sun....

......Savage Rabid Beast.......
Mythica is offline  
post #9 of 15 (permalink) Old 02-26-2010, 01:18 PM
Veteran Member
 
Gerdo's Avatar
 
Join Date: Jun 2007
Location: Littleton, Co.
Posts: 759
2000 4runner
Tundra TRDs, 3/8" topout spacer, Bilsteins
OME 891, 10mm trimpacker, Bilsteins
Stock 16x7 wheel, Yokohama AT-S 265/75-16 (31.9" actual size)

IFS Skid - 12"
Belly Skid - 15"
Fuel Tank Skid - 15"
Diff - 10.25"
Approach angle - 48*
Breakover angle - ?
Departure angle - 39*

2000 4Runner.

3rd gen 4runner fuel tank skidplates http://lilskipsoffroad.wordpress.com/

Last edited by Gerdo; 03-07-2010 at 07:40 PM.
Gerdo is offline  
post #10 of 15 (permalink) Old 02-26-2010, 07:30 PM
Veteran Member
 
devinsixtyseven's Avatar
 
Join Date: Oct 2006
Location: Denver
Posts: 4,858
2K Tundra, V8, Access Cab, LT, 9" rear in DA housing

600x18 coils on 2.5x8 bodies
Alcan packs, +2.5"/+500#, shackles IIRC 1" longer & pivot moved up 1"

[email protected]" backspacing, 315/75/16 mall terrains

Engine/xmission/tcase/belly skids, sliders, ARB & custom bumpers

128" wheelbase

74" front wms-wms (outside of tire approx 86")
72" rear wms-wms (probably ~84" to outside of tire)

Loaded, 3500# front axle, 3000# rear axle, without carpet, rear seat or tailgate

Heights:
IFS skid-
Belly-
Frame-
Sliders-
Rear diff-

'00 Project, constant state of (d)evolution
devinsixtyseven is offline  
post #11 of 15 (permalink) Old 03-01-2010, 03:28 PM
ike
Veteran Member
 
ike's Avatar
 
Join Date: Sep 2006
Location: Loveland CO
Posts: 20,355
1999 Extra Cab Tacoma TRD SR5

OME 882's
Dakar Rear Springs
2" Roger Brown Body lift

255 85 16 BFG KM1's Actual Height-32 1/8"
Front skid - 13 1/8"
Rear Diff - 11"
Mid Crossmember - 16" at lowest
Frame, 19" front 19 1/2" rear.


I will try and figure aproach/departure angles sometime.




Degenerate

I am not lost


98 mazda protege
99 v6 trd taco-some stuff
07 Ninja 650R
ike is offline  
post #12 of 15 (permalink) Old 03-01-2010, 05:51 PM
Veteran Member
 
00regcab's Avatar
 
Join Date: Aug 2007
Location: Brighton, Co
Posts: 7,910
Send a message via AIM to 00regcab
I need to get my frame height.
00regcab is offline  
post #13 of 15 (permalink) Old 03-07-2010, 06:56 PM
Veteran Member
 
RedRunnertc's Avatar
 
Join Date: Dec 2005
Location: Houston, TX
Posts: 15,034
Bump, updated

Former President - CO Chapter
Founding President - OH Chapter

'93 4Runner lockers, armor, tcases, & stuff

'14 Cadillac CTS VSport

Check out pix at www.4wheelingoh.shutterfly.com/action
RedRunnertc is offline  
post #14 of 15 (permalink) Old 05-09-2010, 08:20 PM
#1 cruiser
 
orange crusher's Avatar
 
Join Date: Apr 2007
Location: Colorado area
Posts: 3,660
87 4runner.

D60s front and rear
Ford leafs in back
All pro 4in leafs up front
39s
12in shocks

Bottom of frame is 30
Lowest point is 24
Front axle is 12.5
Rear is 12
Wheelbase 111
Weight 4700
Dang I sit tall

Last edited by orange crusher; 08-12-2010 at 10:34 PM.
orange crusher is offline  
post #15 of 15 (permalink) Old 05-10-2010, 08:31 PM
ike
Veteran Member
 
ike's Avatar
 
Join Date: Sep 2006
Location: Loveland CO
Posts: 20,355
I need to go out and measure mine again with the new tires.




Degenerate

I am not lost


98 mazda protege
99 v6 trd taco-some stuff
07 Ninja 650R
ike is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the TTORA Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
I need dimensions! bloc Tech 0 07-16-2008 11:35 PM
Need some dimensions from a 3.0 Nashvegas Yota Pickup/Early 4Runner Tech 0 03-27-2008 06:37 PM
bolt dimensions and thread type darwink1 Early Tacoma Tech 7 08-05-2006 02:17 PM
Dimensions Yotadriver Interior/Electrical/Electronics 0 03-22-2005 12:40 PM
box dimensions Point45 Interior/Electrical/Electronics 3 02-16-2005 11:20 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome